首页 >标准规范

烟气脱硫机械设备工程安装及验收规范

Code for installation and quality acceptance of flue gas desulphurization mechanical equipment engeering

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【主编部门】
    中国冶金建设协会
  • 【批准部门】

    中华人民共和国住房和城乡建设部

  • 【发布单位】

    中华人民共和国住房和城乡建设部;中华人们共和国国家质量监督检验检疫总局

  • 【主编单位】

    中国十七冶集团有限公司;攀钢集团工程技术有限公司

  • 【参编单位】

    中冶华天工程技术有限公司;北京首钢建设集团有限公司;鞍钢建设集团有限公司;山东省冶金设计院股份有限公司;中钢集团天澄环保科技股份有限公司;攀枝花攀钢集团设计研究院有限公司

  • 【主要起草人】

    庞遵富;钟 彪;尹万云;周 旭;李中元;柴文杰;余华春;王 奇;武文学;安自强;李汝波;王 忠;李双林;王 江;黄思亮;张真春

  • 【主要审查人】

    郭启蛟;王 平;庞 健;颜 钰;栾海林;丁长永;余 伟;杨吉广;张学礼

收起

中文目录

  • 中华人民共和国住房和城乡建设部公告第153号

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

    • 3.1 安  装

    • 3.2 质量验收

  • 4 设备基础、二次灌浆、地脚螺栓和垫板

    • 4.1 安  装

    • 4.2 质量验收

  • 5 设备、构件和材料进场验收

    • 5.1 一般规定

    • 5.2 设  备

    • 5.3 构  件

    • 5.4 材  料

  • 6 吸 收 塔

    • 6.1 一般规定

    • 6.2 基础质量验收

    • 6.3 底梁、底板安装和焊接

    • 6.4 底梁、底板质量验收

    • 6.5 塔体安装

    • 6.6 塔体焊接

    • 6.7 塔体质量验收

    • 6.8 塔体附件质量验收

    • 6.9 充水试验

    • 6.10 塔体内壁防腐质量验收

    • 6.11 塔内件质量验收

  • 7 冷 却 器

    • 7.1 一般规定

    • 7.2 安  装

    • 7.3 质量验收

  • 8 除 雾 器

    • 8.1 一般规定

    • 8.2 安  装

    • 8.3 质量验收

  • 9 真空皮带脱水机

    • 9.1 安  装

    • 9.2 质量验收

  • 10 再 生 塔

    • 10.1 一般规定

    • 10.2 安  装

    • 10.3 质量验收

    • 10.4 溶液贮槽、地下储槽和分离器质量验收

    • 10.5 贫富液换热器、再沸器、冷却器质量验收

  • 11 吸 附 塔

    • 11.1 一般规定

    • 11.2 安  装

    • 11.3 结构质量验收

    • 11.4 塔体质量验收

    • 11.5 料仓质量验收

    • 11.6 液氨储罐质量验收

    • 11.7 旋转阀质量验收

  • 12 解 吸 塔

    • 12.1 一般规定

    • 12.2 安  装

    • 12.3 结构质量验收

    • 12.4 塔体质量验收

    • 12.5 热气发生器质量验收

  • 13 脱硫反应塔

    • 13.1 一般规定

    • 13.2 基础质量验收

    • 13.3 结构质量验收

    • 13.4 塔体安装

    • 13.5 塔体质量验收

    • 13.6 附件质量验收

    • 13.7 气密性试验

  • 14 布袋除尘过滤器

    • 14.1 安  装

    • 14.2 基础质量验收

    • 14.3 结构质量验收

    • 14.4 本体质量验收

    • 14.5 附件质量验收

    • 14.6 滤袋质量验收

  • 15 设备试运转

    • 15.1 一般规定

    • 15.2 静置设备试运行

    • 15.3 风机试运转

    • 15.4 运输、给料、搅拌设备试运转

    • 15.5 阀门、泵试运转

    • 15.6 除尘器试运转

  • 16 安全与环保

  • 附录A 分项工程质量验收记录

  • 附录B 分部工程质量验收记录

  • 附录C 单位工程质量验收记录

  • 附录D 设备无负荷试运转记录

  • 本规范用词说明

  • 引用标准名录

收起

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirement

    • 3.1 Installation

    • 3.2 Quality acceptance

  • 4 Equipment foundation,secondary grouting,anchor bolt and bearing plate

    • 4.1 Installation

    • 4.2 Quality acceptance

  • 5 Equipment,element and material in site

    • 5.1 General requirement

    • 5.2 Equipment

    • 5.3 Element

    • 5.4 Material

  • 6 Absorber

    • 6.1 General requirement

    • 6.2 Quality acceptance of the foundation

    • 6.3 Base beam,base plate installation and welding

    • 6.4 Quality acceptance of base beam and base plate

    • 6.5 Installation of the body

    • 6.6 Welding of the body

    • 6.7 Quality acceptance of the body

    • 6.8 Quality acceptance of the attachment

    • 6.9 Watering test

    • 6.10 Quality acceptance of interal antisepsis

    • 6.11 Quality acceptance of interal element

  • 7 Cooler

    • 7.1 General requirement

    • 7.2 Installation

    • 7.3 Quality acceptance

  • 8 Mist eliminator

    • 8.1 General requirement

    • 8.2 Installation

    • 8.3 Quality acceptance

  • 9 Vacuum belt filter

    • 9.1 Installation

    • 9.2 Quality acceptance

  • 10 Regenerator

    • 10.1 General requirement

    • 10.2 Installation of the body

    • 10.3 Quality acceptance of the body

    • 10.4 Quality acceptance of the tank,under ground bunker and decomposer

    • 10.5 Quality acceptance of the heat exchanger,reboiler and cooler

  • 11 Absorber

    • 11.1 General requirement

    • 11.2 Installation

    • 11.3 Quality acceptance of steel structure

    • 11.4 Quality acceptance of the body

    • 11.5 Quality acceptance of silos for solid material

    • 11.6 Quality acceptance of liquid ammonia can

    • 11.7 Quality acceptance of rotary valve

  • 12 Regenerator

    • 12.1 General requirement

    • 12.2 Installation

    • 12.3 Quality acceptance of steel structure

    • 12.4 Quality acceptance of the body

    • 12.5 Quality acceptance of heating furnace

  • 13 Desulphurization reactor

    • 13.1 General requirement

    • 13.2 Quality acceptance of the foundation

    • 13.3 Quality acceptance of steel structure

    • 13.4 Installation of the body

    • 13.5 Quality acceptance of the body

    • 13.6 Quality acceptance of the attachment

    • 13.7 Airtight test

  • 14 Bag-type filter

    • 14.1 Installation

    • 14.2 Quality acceptance of the foundation

    • 14.3 Quality acceptance of the frame

    • 14.4 Quality acceptance of the body

    • 14.5 Quality acceptance of the attachment

    • 14.6 Quality acceptance of the filter bag

  • 15 Equipment test run

    • 15.1 General requirement

    • 15.2 Acceptance of static equipment

    • 15.3 Fan test run

    • 15.4 Conveyor,feeder,mixer test run

    • 15.5 Valve,pump test run

    • 15.6 Bag-type fliter test run

  • 16 Safety and environmental protection

  • Appendix A Record for acceptance of sub-item project′s quality

  • Appendix B Record for acceptance of subsection project′s quality

  • Appendix C Record for acceptance of unit project′s quality

  • Appendix D Record of no load test run for flue gas desulfurization equipment

  • Explanation of wording in this code

  • List of quoted standards

收起

公告

中华人民共和国住房和城乡建设部公告第153号

住房城乡建设部关于发布国家标准《烟气脱硫机械设备工程安装及验收规范》的公告
00-04-4
现批准《烟气脱硫机械设备工程安装及验收规范》为国家标准,编号为GB 50895—2013,自2014年5月1日起实施。其中,第15.1.5条为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2013年9月6日
收起

本书术语

术语 英文名称 术语 英文名称
湿法烟气脱硫 wet flue gas desulphurization 吸收塔 absorber
真空皮带脱水机 vacuum belt filter 除雾器 mist eliminator
干法脱硫 dry desulphurization 吸附塔 absorber
解吸塔 regenerator 半干法脱硫 half dry desulphurization
脱硫反应塔 desulphurization reactor

确定