中华人民共和国住房和城乡建设部公告第293号

前　　言

1　总　　则

2　基本规定

3　设备基础、地脚螺栓和垫板

• 3.1　设备基础

• 3.2　设备安装基准线和基准点

• 3.3　地脚螺栓

• 3.4　垫　　板

4　设备和材料

• 4.1　设　　备

• 4.2　材　　料

5　堆、取料机

• 5.1　一般规定

• 5.2　走行机构安装

• 5.3　回转装置安装

• 5.4　电缆卷筒安装

• 5.5　皮带机、平衡锤、锚固锁紧器安装

6　焦炉护炉铁件及操作平台

• 6.1　一般规定

• 6.2　炉柱安装

• 6.3　小炉柱安装

• 6.4　保护板安装

• 6.5　炉门框及磨板安装

• 6.6　炉门安装

• 6.7　纵、横拉条安装

• 6.8　机侧和焦侧平台安装

7　焦炉炉下加热及交换装置

• 7.1　煤气主管、支管、下喷管安装

• 7.2　调节旋塞、交换旋塞和孔板盒安装

• 7.3　废气交换开闭器安装

• 7.4　煤气交换机安装

• 7.5　交换传动机构安装

• 7.6　烟道闸板阀安装

8　焦炉炉顶设备

• 8.1　集气管及氨水管安装

• 8.2　上升管、桥管安装

• 8.3　拦焦、装煤除尘导管安装

9　焦炉附属设备

• 9.1　炉门修理站、推焦杆和平煤杆试验设备安装

• 9.2　湿熄焦塔捕集板安装

• 9.3　煤塔给煤装置安装

• 9.4　煤塔装煤称量装置安装

• 9.5　推焦机、装煤车、熄焦车轨道安装

• 9.6　拦焦机轨道安装

10　推　焦　机

• 10.1　一般规定

• 10.2　走行装置安装

• 10.3　机体钢构架安装

• 10.4　推焦装置安装

• 10.5　摘门装置安装

• 10.6　炉门框清扫装置安装

• 10.7　炉门清扫装置安装

• 10.8　平煤装置安装

• 10.9　小炉门清扫装置安装

11　拦　焦　机

• 11.1　一般规定

• 11.2　走行装置安装

• 11.3　机体钢构架安装

• 11.4　导焦栅安装

• 11.5　摘门装置安装

• 11.6　炉门框清扫装置安装

• 11.7　炉门清扫装置安装

• 11.8　拦焦除尘装置安装

12　装　煤　车

• 12.1　一般规定

• 12.2　走行装置安装

• 12.3　机体钢构架安装

• 12.4　煤斗安装

• 12.5　下料装置安装

• 12.6　揭盖装置安装

• 12.7　氨水交换及上升管盖开闭机构安装

• 12.8　装煤车除尘装置安装

13　熄焦车、电机车、焦罐车

• 13.1　熄焦车安装

• 13.2　电机车安装

• 13.3　焦罐车安装

14　干熄焦工艺钢结构及轨道

• 14.1　一般规定

• 14.2　熄焦槽钢结构安装

• 14.3　提升机轨道安装

• 14.4　提升井架导轨安装

• 14.5　检修吊车轨道安装

• 14.6　提升机电缆导架安装

15　干熄焦熄焦槽

• 15.1　熄焦槽壳体安装

• 15.2　供气装置安装

16　干熄焦装入、排出系统机械设备

• 16.1　横移牵引装置安装

• 16.2　提升机安装

• 16.3　装入装置安装

• 16.4　排出装置安装

• 16.5　自动对位装置安装

17　干熄焦气体循环系统机械设备

• 17.1　一般规定

• 17.2　一次除尘器安装

• 17.3　二次除尘器安装

• 17.4　给水预热器安装

18　干熄焦辅助设备

• 18.1　一般规定

• 18.2　电梯筒安装

• 18.3　除盐水槽安装

19　煤气净化及化学产品回收设备

• 19.1　一般规定

• 19.2　塔类设备组装

• 19.3　塔类设备现场焊接

• 19.4　塔类设备安装

• 19.5　塔类设备部件安装

• 19.6　容器类设备本体组装

• 19.7　容器类设备现场焊接

• 19.8　容器类设备安装

• 19.9　槽罐类设备安装

• 19.10　槽罐类设备焊接

• 19.11　换热类设备安装

• 19.12　机械澄清槽安装

• 19.13　离心分离机安装

• 19.14　煤气初、终冷器安装

• 19.15　电捕焦油器安装

• 19.16　饱和器安装

• 19.17　管式加热炉安装

• 19.18　转鼓结晶机安装

• 19.19　萘精制机安装

• 19.20　装料机安装

• 19.21　定量装桶机安装

• 19.22　制片机安装

20　焦化机械设备试运转及焦炉热态工程

• 20.1　一般规定

• 20.2　堆、取料机试运转

• 20.3　焦炉机械设备试运转

• 20.4　移动机械试运转

• 20.5　干熄焦装置试运转

• 20.6　煤气净化及化学产品回收装置试运转

• 20.7　焦炉热态工程

本规范用词说明

引用标准名录

1 General provisions

2 Basic requirement

3 Equipment foundation, anchor bolts and shim plates

• 3.1 Equipment foundation

• 3.2 Datum line and datum mark for installation of equipment

• 3.3 Anchor bolts

• 3.4 Shim plates

4 Equipment and material

• 4.1 Equipment

• 4.2 Material

5 Material stacker and reclaimer

• 5.1 General requirement

• 5.2 Installation of walking structure

• 5.3 Installation of reversible device

• 5.4 Installation of cable drum

• 5.5 Installation of belt conveyor, balance weight and anchorage locker

6 Protective iron parts and operation platform of coke oven

• 6.1 General requirement

• 6.2 Installation of buckstays

• 6.3 Installation of small buckstays

• 6.4 Installation of protective plates

• 6.5 Installation of oven port frames and nog plates

• 6.6 Installation of oven ports

• 6.7 Installation of longitudinal and lateral bracings

• 6.8 Installation of platforms on the coke pusher side and coke guide side

7 Heating and exchange device under the coke oven

• 7.1 Installation of gas main pipelines, branch pipeline and downspouts

• 7.2 Installation of regulating cock, exchange cock and orifice plate box

• 7.3 Installation of waste gas exchange shutter

• 7.4 Installation of gas exchanger

• 7.5 Installation of exchange driving structure

• 7.6 Installation of stack gate valve

8 Equipment on the top of coke oven

• 8.1 Installation of gas headers and liquid ammonia pipes

• 8.2 Installation of risers and crossover mains

• 8.3 Installation of guide pipes for coke guide and coal charging dedusting

9 Auxiliary equipment of coke oven

• 9.1 Installation of test equipment for oven port repair station, coke pushing ram and coal leveling bar

• 9.2 Installation of collecting plates of wet quenching tower

• 9.3 Installation of coal feeding device of coal tower

• 9.4 Installation of scale for coal charging of coal tower

• 9.5 Installation of rails of coke pusher, coal charger and coke car

• 9.6 Installation of rails of coke guide

10 Coke pusher

• 10.1 General requirement

• 10.2 Installation of walking structure

• 10.3 Installation of steel structure

• 10.4 Installation of coke pushing device

• 10.5 Installation of port extracting device

• 10.6 Installation of cleaning device of oven port frames

• 10.7 Installation of cleaning device of oven ports

• 10.8 Installation of coal leveling device

• 10.9 Installation of cleaning device of small oven ports

11 Coke guide

• 11.1 General requirement

• 11.2 Installation of walking structure

• 11.3 Installation of steel structure

• 11.4 Installation of coke guide grill

• 11.5 Installation of port extracting device

• 11.6 Installation of cleaning device of oven port frames

• 11.7 Installation of cleaning device of oven ports

• 11.8 Installation of coke guide dedusting device

12 Coal charger

• 12.1 General requirement

• 12.2 Installation of walking structure

• 12.3 Installation of steel structure

• 12.4 Installation of coal hopper

• 12.5 Installation of coal feeding device

• 12.6 Installation of cover extracting device

• 12.7 Installation of shutters of covers of liquid ammonia exchange and risers

• 12.8 Installation of dedusting device of coal charger

13 Coke car, electric locomotive and coke tank car

• 13.1 Installation of coke car

• 13.2 Installation of electric locomotive

• 13.3 Installation of coke tank car

14 Process steel structure and rails of coke dry quench

• 14.1 General requirement

• 14.2 Installation of quenching channel steel structure

• 14.3 Installation of rails of lifting device

• 14.4 Installation of guide rails of lifting headframe

• 14.5 Installation of rails of maintenance cranes

• 14.6 Installation of cable guide frame of lifting device

15 Quenching tank of CDQ

• 15.1 Installation of shell body of quenching tank

• 15.2 Installation of air supply device

16 Mechanical equipment for charging and discharging system of CDQ

• 16.1 Installation of transverse tracting device

• 16.2 Installation of lifting device

• 16.3 Installation of charging device

• 16.4 Installation of discharging device

• 16.5 Installation of automatic para-position device

17 Mechanical equipment of gas circulating system of CDQ

• 17.1 General requirement

• 17.2 Installation of primary deduster

• 17.3 Installation of secondary deduster

• 17.4 Installation of water feeding pre-heater

18 Auxiliary equipment of CDQ

• 18.1 General requirement

• 18.2 Installation of elevator shaft

• 18.3 Installation of demineralized water tank

19 Equipment of gas purification and chemical recovery

• 19.1 General requirement

• 19.2 Assembly of tower equipment

• 19.3 Site welding of tower equipment

• 19.4 Installation of tower equipment

• 19.5 Installation of parts of tower equipment

• 19.6 Assembly of vessel equipment

• 19.7 Site welding of vessel equipment

• 19.8 Installation of vessel equipment

• 19.9 Installation of tank equipment

• 19.10 Welding of tank equipment

• 19.11 Installation of heat-exchange equipment

• 19.12 Installation of mechanical sedimentation tank

• 19.13 Installation of centrifugal separater

• 19.14 Installation of gas primary, final cooler

• 19.15 Installation of electric tar skimmer

• 19.16 Installation of saturator

• 19.17 Installation of pipe-type heating furnace

• 19.18 Installation of rotary drum crystallizer

• 19.19 Installation of naphthalene refiner

• 19.20 Installation of material charger

• 19.21 Installation of quantitative barrel filler

• 19.22 Installation of pelleter

20 Test-run of mechanial equipment of coking＆chemical and thermal-state operation of coke oven

• 20.1 General requirement

• 20.2 Test-run of material stacker and reclaimer

• 20.3 Test-run of mechanial equipment of coke oven

• 20.4 Test-run of moving mechanial equipment

• 20.5 Test-run of dry quenching unit

• 20.6 Test-run of gas purification and chemical recovery unit

• 20.7 Thermal-state operation of coke oven

Explanation of wording in this code

List of quoted standards