点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 625-2024 钢管再生混凝土结构技术规程 - 工标库

T/CECS 625-2024 钢管再生混凝土结构技术规程 现行

发布日期:2024-04-08

实施日期:2024-09-01

替代以下标准: T/CECS 625-2019  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 主要符号

  • 3 基本设计规定

    • 3.1 一般规定

    • 3.2 作用和作用组合

    • 3.3 构造规定

  • 4 材料

    • 4.1 钢材

    • 4.2 再生混凝土

    • 4.3 连接材料

  • 5 结构分析

    • 5.1 一般规定

    • 5.2 计算指标

    • 5.3 分析方法

  • 6 构件承载力计算

    • 6.1 一般规定

    • 6.2 轴心受力构件承载力计算

    • 6.3 受弯、压弯和拉弯构件承载力计算

    • 6.4 受剪、受扭和压扭构件承载力计算

    • 6.5 局部受压构件承载力计算

  • 7 构造设计

  • 8 节点和连接设计

    • 8.1 一般规定

    • 8.2 梁柱节点

    • 8.3 钢管再生混凝土桁式混合结构节点

    • 8.4 柱脚节点

  • 9 防护设计

    • 9.1 一般规定

    • 9.2 防腐设计

    • 9.3 防火设计

    • 9.4 防撞击设计

    • 9.5 抗爆设计

  • 10 施工、验收、维护和拆除

    • 10.1 一般规定

    • 10.2 制作与安装

    • 10.3 再生混凝土施工

    • 10.4 检测与验收

    • 10.5 维护和拆除

  • 附录A 钢管再生混凝土结构的材料本构模型

    • A.1 再生混凝土

    • A.2 钢材

  • 附录B 钢管内再生混凝土收缩应变和徐变应变计算

  • 附录C 轴心受压钢管再生混凝土构件的稳定系数

  • 用词说明

  • 引用标准名录

  • 修订说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic design requirements

    • 3.1 General requirements

    • 3.2 Actions and combinations of actions

    • 3.3 Detailing requirements

  • 4 Materials

    • 4.1 Steel

    • 4.2 Recycled aggregate concrete

    • 4.3 Connection materials

  • 5 Structural analysis

    • 5.1 General requirements

    • 5.2 Design indices

    • 5.3 Analysis methods

  • 6 Ultimate limit states

    • 6.1 General requirements

    • 6.2 Resistances of members in axial loading

    • 6.3 Resistances of members in compression,bending and combined effects

    • 6.4 Resistances of members in shear,torsion and combined effects

    • 6.5 Resistances of members under local bearing

  • 7 Design of constructional details

  • 8 Design of joints and connections

    • 8.1 General requirements

    • 8.2 Beam-to-column joints

    • 8.3 Joints of trussed RACFST hybrid structures

    • 8.4 Column bases

  • 9 Protective design

    • 9.1 General requirements

    • 9.2 Design of corrosion resistance

    • 9.3 Design of fire resistance

    • 9.4 Design of impact resistance

    • 9.5 Design of blast resistance

  • 10 Construction,acceptance,maintenance and demolition

    • 10.1 General requirements

    • 10.2 Fabrication and erection of steel tubes

    • 10.3 Construction of recycled aggregate concrete

    • 10.4 Inspection and acceptance

    • 10.5 Maintenance and demolition

  • Appendix A Constitutive models for materials in RACFST structures

  • Appendix B Calculation of shrinkage and creep strains of recycled aggregate concrete in RACFST members

  • Appendix C Stability factors for RACFST members in axial compression

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告

5-50-00
第1964号
关于发布《钢管再生混凝土结构技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2022年第二批协会标准制订、修订计划〉的通知》(建标协字〔2022〕40号)的要求,由清华大学、哈尔滨工业大学等单位编制的《钢管再生混凝土结构技术规程》,经本协会建筑产业化分会组织审查,现批准发布,编号为T/CECS 625-2024,自2024年9月1日起施行。原《钢管再生混凝土结构技术规程》T/CECS 625-2019同时废止。
中国工程建设标准化协会
2024年4月8日

本书术语

术语 英文名称
钢管再生混凝土(RACFST)构件 recycled aggregate concrete-filled steel tubular member
钢管再生混凝土(RACFST)结构 recycled aggregate concrete-filled steel tubular structure
钢管再生混凝土(RACFST)桁式混合结构 trussed recycled aggregate concrete-filled steel tubular hybrid structure
再生混凝土 recycled aggregate concrete
再生粗骨料 recycled coarse aggregate
再生粗骨料取代率 replacement ratio of recycled coarse aggregate
钢管初应力限值 limiting value of initial stress in the steel tube
截面含钢率 steel ratio
约束效应系数 confinement factor

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称