点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
CJJ/T 279-2018 城镇桥梁沥青混凝土桥面铺装施工技术标准 - 工标库

CJJ/T 279-2018 城镇桥梁沥青混凝土桥面铺装施工技术标准 现行

发布日期:2018-04-10

实施日期:2018-10-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前  言

  • 1 总  则

  • 2 术语和代号

    • 2.1 术  语

    • 2.2 代  号

  • 3 桥面铺装结构组合

    • 3.1 一般规定

    • 3.2 桥面典型铺装结构

    • 3.3 特殊部位典型铺装结构

  • 4 材  料

    • 4.1 一般规定

    • 4.2 沥青胶结料

    • 4.3 集  料

    • 4.4 填料和纤维

    • 4.5 功能调联层原材料

    • 4.6 界面功能层材料

  • 5 桥面板预处理

    • 5.1 一般规定

    • 5.2 混凝土桥面板预处理

    • 5.3 钢桥面板预处理

  • 6 环氧沥青混凝土铺装

    • 6.1 一般规定

    • 6.2 环氧沥青混合料级配及性能要求

    • 6.3 防水粘结层施工

    • 6.4 粘层施工

    • 6.5 环氧沥青混合料施工

  • 7 浇注式沥青混凝土铺装

    • 7.1 一般规定

    • 7.2 浇注式沥青混合料级配及性能要求

    • 7.3 防水粘结层施工

    • 7.4 改性沥青胶砂缓冲层施工

    • 7.5 粘层施工

    • 7.6 浇注式沥青混合料施工

  • 8 功能调联层与高黏高弹改性沥青SMA组合铺装

    • 8.1 一般规定

    • 8.2 剪力钉与钢筋网安装

    • 8.3 高韧性轻集料混凝土和纤维混凝土配合比设计

    • 8.4 高韧性轻集料混凝土和纤维混凝土施工

    • 8.5 高黏高弹改性沥青SMA配合比设计及性能要求

    • 8.6 防水粘结应力吸收层的施工

    • 8.7 高黏高弹改性沥青SMA施工

  • 9 其他沥青混凝土桥面铺装

    • 9.1 一般规定

    • 9.2 沥青混凝土配合比设计

    • 9.3 防水粘结层、防水粘结应力吸收层和粘层施工

    • 9.4 其他沥青混凝土施工

  • 10 质量检验与验收

    • 10.1 一般规定

    • 10.2 材料检验

    • 10.3 质量验收

  • 附录A 桥面铺装粘结强度试验方法

  • 附录B 浇注式沥青混合料刘埃尔流动性试验方法

  • 附录C 环氧沥青混合料配合比设计方法

  • 附录D 浇注式沥青混合料配合比设计方法

  • 附录E 浇注式沥青混合料贯入度试验方法

  • 附录F 高韧性轻集料混凝土配合比设计方法

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms and Symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Bridge Pavement Structure Combination

    • 3.1 General Requirements

    • 3.2 Typical Bridge Pavement Structure

    • 3.3 Typical Pavement Structure for Special Site

  • 4 Materials

    • 4.1 General equirements

    • 4.2 Asphalt Binder

    • 4.3 Aggregate

    • 4.4 Padding and Fiber

    • 4.5 Function Adjust-Linking Materials

    • 4.6 Interface Function Layer Material

  • 5 Pretreatment for Bridge Deck Slab

    • 5.1 General Requirements

    • 5.2 Pretreatment for Concrete Bridge Deck Slab

    • 5.3 Pretreatment for Steel Bridge Deck Slab

  • 6 Epoxy Asphalt Concrete Paving

    • 6.1 General Requirements

    • 6.2 Grading and Performance Requirements for Epoxy Asphalt Mixture

    • 6.3 Waterproof-bonding Layer Construction

    • 6.4 Tack Coat Construction

    • 6.5 Epoxy Asphalt Mixture Construction

  • 7 Gussasphalt Paving

    • 7.1 General Requirements

    • 7.2 Grading and Performance Requirements for Gussasphalt

    • 7.3 Waterproof-bonding Layer Construction

    • 7.4 Modified Asphalt Mastic cushioning Layer Construction

    • 7.5 Tack Coat Construction

    • 7.6 Gussasphalt Construction

  • 8 Combined Pavement for Function Adjust-linking and High Viscosity and High Elastic Modified Asphalt SMA

    • 8.1 General Requirements

    • 8.2 Shear Stud and reinforcing Mesh Installation

    • 8.3 Mix Design of High tenacity Lightweight Aggregate Concrete and Fiber Concrete

    • 8.4 High Tenacity Lightweight Aggregate Concrete and Fiber Concrete Construction

    • 8.5 Mix Design and Performance Requirements for High Viscosity and High Elastic Modified Asphalt SMA

    • 8.6 Waterproof-Bond and Stress Absorbing Layer Construction

    • 8.7 High Viscosity and High Elastic Modified Asphalt Construction

  • 9 Other Asphalt Concrete Bridge Paving

    • 9.1 General Requirements

    • 9.2 Mix Proportion Design of Asphalt Concrete

    • 9.3 Construction for Waterproof-bonding Layer.Waterproofbonding and Stress Absorbing Layer and Tack Coat

    • 9.4 Other Asphalt Concrete Construction

  • 10 Quality Inspection and Acceptance

    • 10.1 General Requirements

    • 10.2 Material Inspection

    • 10.3 Quality Acceptance

  • Appendix A Test Method for Bridge Paving Bonding Strength

  • Appendix B Mobility Test Method for Gussasphalt

  • Appendix C Mix Proportion Design for Epoxy Asphalt Mixture

  • Appendix D Mix Proportion Design for Gussasphalt

  • Appendix E Penetration Test Method for Gussasphalt

  • Appendix F Mix Design Method for High tenacity Lightweight Aggregate Concrete

  • Explanation of Wording in ThisStandard

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

4-40-00
2018第50号
住房城乡建设部关于发布行业标准《城镇桥梁沥青混凝土桥面铺装施工技术标准》的公告
现批准《城镇桥梁沥青混凝土桥面铺装施工技术标准》为行业标准,编号为CJJ/T 279-2018,自2018年10月1日起实施。
本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房城乡建设部标准定额研究所组织中国建筑工业出版社出版发行。
中华人民共和国住房和城乡建设部
2018年4月10日

本书术语

术语 英文名称
界面功能层 interface functional layer
防腐层 anti-corrosion coating
防水粘结层 waterproof-bonding layer
缓冲层 cushioning layer
防水粘结应力吸收层 waterproof-bond and stress absorbing layer
改性沥青胶砂 modified asphalt mastic
浇注式沥青混合料 gussasphalt
环氧沥青混合料 epoxy asphalt mixtures
容留时间 reserved time range
高韧性轻集料混凝土 high tenacity lightweight aggrega te concrete

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称