中华人民共和国住房和城乡建设部公告

前　　言

1　总　　则

2　术　　语

3　基本规定

• 3.1　施工技术管理

• 3.2　施工质量管理

• 3.3　材料与设备质量管理

• 3.4　安全与环境保护

4　金属风管与配件制作

• 4.1　一般规定

• 4.2　金属风管制作

• 4.3　配件制作

• 4.4　质量检查

5　非金属与复合风管及配件制作

• 5.1　一般规定

• 5.2　聚氨酯铝箔与酚醛铝箔复合风管及配件制作

• 5.3　玻璃纤维复合风管与配件制作

• 5.4　玻镁复合风管与配件制作

• 5.5　硬聚氯乙烯风管与配件制作

• 5.6　质量检查

6　风阀与部件制作

• 6.1　一般规定

• 6.2　风　　阀

• 6.3　风罩与风帽

• 6.4　风　　口

• 6.5　消声器、消声风管、消声弯头及消声静压箱

• 6.6　软接风管

• 6.7　过　滤　器

• 6.8　风管内加热器

• 6.9　质量检查

7　支吊架制作与安装

• 7.1　一般规定

• 7.2　支吊架制作

• 7.3　支吊架安装

• 7.4　装配式管道吊架安装

• 7.5　质量检查

8　风管与部件安装

• 8.1　一般规定

• 8.2　金属风管安装

• 8.3　非金属与复合风管安装

• 8.4　软接风管安装

• 8.5　风口安装

• 8.6　风阀安装

• 8.7　消声器、静压箱、过滤器、风管内加热器安装

• 8.8　质量检查

9　空气处理设备安装

• 9.1　一般规定

• 9.2　空调末端装置安装

• 9.3　风机安装

• 9.4　空气处理机组与空气热回收装置安装

• 9.5　质量检查

10　空调冷热源与辅助设备安装

• 10.1　一般规定

• 10.2　蒸汽压缩式制冷（热泵）机组安装

• 10.3　吸收式制冷机组安装

• 10.4　冷却塔安装

• 10.5　换热设备安装

• 10.6　蓄热蓄冷设备安装

• 10.7　软化水装置安装

• 10.8　水泵安装

• 10.9　制冷制热附属设备安装

• 10.10　质量检查

11　空调水系统管道与附件安装

• 11.1　一般规定

• 11.2　管道连接

• 11.3　管道安装

• 11.4　阀门与附件安装

• 11.5　质量检查

12　空调制冷剂管道与附件安装

• 12.1　一般规定

• 12.2　管道安装

• 12.3　阀门与附件安装

• 12.4　质量检查

13　防腐与绝热

• 13.1　一般规定

• 13.2　管道与设备防腐

• 13.3　空调水系统管道与设备绝热

• 13.4　空调风管系统与设备绝热

• 13.5　质量检查

14　监测与控制系统安装

• 14.1　一般规定

• 14.2　现场监控仪表与设备安装

• 14.3　线管与线槽安装及布线

• 14.4　中央监控与管理系统安装

• 14.5　质量检查

15　检测与试验

• 15.1　一般规定

• 15.2　风管强度与严密性试验

• 15.3　风管系统严密性试验

• 15.4　水系统阀门水压试验

• 15.5　水系统管道水压试验

• 15.6　冷凝水管道通水试验

• 15.7　管道冲洗试验

• 15.8　开式水箱（罐）满水试验和换热器及密闭容器水压试验

• 15.9　风机盘管水压试验

• 15.10　制冷系统试验

• 15.11　通风与空调设备电气检测与试验

16　通风与空调系统试运行与调试

• 16.1　一般规定

• 16.2　设备单机试运转与调试

• 16.3　系统无生产负荷下的联合试运行与调试

本规范用词说明

引用标准名录

1　General Provisions

2　Terms

3　Basic Requirements

• 3.1　Construction Technology Management

• 3.2　Construction Quality Management

• 3.3　Material and Facility Quality Management

• 3.4　Safety and Environmental Protection

4　Metal Air Duct and Fittings Making

• 4.1　General Requirements

• 4.2　Metal Air Duct Making

• 4.3　Fittings Making

• 4.4　Quality Inspection

5　Nonmetallic or Composite Air Duct and Fittings Making

• 5.1　General Requirements

• 5.2　Polyurethane/Phenolic Composite Air Duct and Fittings Making

• 5.3　Glass Fiber Composite Air Duct and Fittings Making

• 5.4　Glass Fibre/Magnesium Composite Air Duct and Fittings Making

• 5.5　Rigid Polyvinyl Chloride Air Duct and Fittings Making

• 5.6　Quality Inspection

6　Air Valve and Components Making

• 6.1　General Requirements

• 6.2　Air Valve

• 6.3　Hood and Cowl

• 6.4　Air Opening

• 6.5　Muffler，Air Duct Muffler，Bend Muffler and Muffling StaticPressure Box

• 6.6　Soft Coupling Air Duct

• 6.7　Filter

• 6.8　Heater in Air Duct

• 6.9　Quality Inspection

7　Making and Installation of Support and Hanger

• 7.1　General Requirements

• 7.2　Support and Hanger Making

• 7.3　Support and Hanger Installation

• 7.4　Installation of Fabricated Pipeline Hanger

• 7.5　Quality Inspection

8　Air Duct and Components Installation

• 8.1　General Requirements

• 8.2　Metal Air Duct Installation

• 8.3　Nonmetallic and Composite Air Duct Installation

• 8.4　Soft Coupling Air Duct Installation

• 8.5　Air opening Installation

• 8.6　Air Valve Installation

• 8.7　Installation of Muffler，Static Pressure Box，Filter and Heater in Air Duct

• 8.8　Quality Inspection

9　Air Handling Equipment Installation

• 9.1　General Requirements

• 9.2　Air Conditioning Terminal Device Installation

• 9.3　Fan Installation

• 9.4　Air Handling Unit and Heat Recovery Device Installation

• 9.5　Quality Inspection

10　Cold/Heat Sources and Auxiliary Equipment Installation

• 10.1　General Requirements

• 10.2　Steam Compression Refrigeration（Heat Pump）Unit Installation

• 10.3　Absorption Refrigerating Unit Installation

• 10.4　Cooling Tower Installation

• 10.5　Heat Exchanger Installation

• 10.6　Heat and Cold Storage Equipment Installation

• 10.7　Soft Water Device Installation

• 10.8　Water Pump Installation

• 10.9　Installation of Refrigeration and Heating Accessory Equipment

• 10.10　Quality Inspeetion

11　Installation of Pipeline and Accessory of Air Conditioning Water System

• 11.1　General Requirements

• 11.2　Pipe Connection

• 11.3　Pipeline Installation

• 11.4　Valve and Accessory Installation

• 11.5　Quality Inspection

12　Refrigeration Pipeline and Accessory Installation

• 12.1　General Requirements

• 12.2　Pipeline Installation

• 12.3　Valve and Accessory Installation

• 12.4　Quality Inspection

13　Anticorrosion and Thermal Insulation

• 13.1　General Requirements

• 13.2　Pipeline and Equipment Anticorrosion

• 13.3　Pipeline of Air Conditioning Water System and Equipment Insulation

• 13.4　Air Duct System of Air Condittoning and Equipment Thermal Insulation

• 13.5　Quality Inspection

14　Monitoring and Control System Installation

• 14.1　General Requirements

• 14.2　Monitoring Instrument and Equipment Installation

• 14.3　Electric Wire Conduit and Wire Groove Installation and Wiring

• 14.4　Central Monitoring and Management System Installation

• 14.5　Quality Inspection

15　Inspection and Testing

• 15.1　General Requirements

• 15.2　Air Duct Strength and Leakage Test

• 15.3　Air Duct System Leakage Test

• 15.4　Hydrostatic Test of Water System Valve

• 15.5　Hydrostatic Test of Water System Ptpeline

• 15.6　Water Filling Test of Condensate Pipeline

• 15.7　Flush Test of Pipeline

• 15.8　Full Water Test of Open Tank and Hydrostatic Test of Heat Exchanger and Airtight Container

• 15.9　Hydrostatic Test of Fan Coil Units

• 15.10　Refrigeration System Testing

• 15.11　Inspection and Testing of Electrical Equipment in Ventilation and Air Conditioning System

16　Ventilation and Air Conditioning System Operation and Commissioning

• 16.1　General Requirements

• 16.2　Single Machine Operation and Commissioning

• 16.3　System Operation and Commissioning under Production Load Free

Explanation of Wording in This Code

List of Quoted Standards