点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 472-2017 既有混凝土结构钻切技术规程 - 工标库

T/CECS 472-2017 既有混凝土结构钻切技术规程 现行

发布日期:2017-06-19

实施日期:2017-10-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

    • 3.1 一般规定

    • 3.2 安全及环保要求

  • 4 钻切设计

  • 5 金刚石薄壁钻切割法施工

    • 5.1 一般规定

    • 5.2 金刚石薄壁钻切割工具

    • 5.3 金刚石薄壁钻切割设备

    • 5.4 施工工艺及技术要求

    • 5.5 安全要求

  • 6 金刚石圆盘锯切割法施工

    • 6.1 一般规定

    • 6.2 金刚石圆盘锯切割工具

    • 6.3 金刚石圆盘锯切割设备

    • 6.4 施工工艺及技术要求

    • 6.5 安全要求

  • 7 金刚石绳锯切割法施工

    • 7.1 一般规定

    • 7.2 金刚石绳锯切割工具

    • 7.3 金刚石绳锯切割设备

    • 7.4 施工工艺及技术要求

    • 7.5 安全要求

  • 8 质量检验

    • 8.1 一般规定

    • 8.2 钻切设备安装

    • 8.3 外观质量

    • 8.4 位置和尺寸偏差

  • 本规程用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

    • 3.1 General requirements

    • 3.2 Safety and environmental requirements

  • 4 Drilling and cutting design

  • 5 Diamond thin-wall drilling and cutting method construction

    • 5.1 General requirements

    • 5.2 Tools of diamond thin-wall drilling and cutting

    • 5.3 Equipments of diamond thin-wall drilling and cutting

    • 5.4 Construction process and technology requirements

    • 5.5 Safety requirements

  • 6 Diamond disk saw cutting method construction

    • 6.1 General requirements

    • 6.2 Tools of diamond disk saw cutting

    • 6.3 Equipments of diamond disk saw cutting

    • 6.4 Construction process and technology requirements

    • 6.5 Safety requirements

  • 7 Diamond wire saw cutting method construction

    • 7.1 General requirements

    • 7.2 Tools of diamond wire saw cutting

    • 7.3 Equipments of diamond wire saw cutting

    • 7.4 Construction process and technology requirements

    • 7.5 Safety requirements

  • 8 Quality inspection and acceptance

    • 8.1 General requirements

    • 8.2 Installation of drilling and cutting equipments

    • 8.3 Surface quality

    • 8.4 Admissible errors of location and dimension

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第287号
关于发布《既有混凝土结构钻切技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2014年第二批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2014〕070号)的要求,由北京交通大学、北京发研工程技术有限公司等单位编制的《既有混凝土结构钻切技术规程》,经本协会混凝土结构专业委员会组织审查,现批准发布,编号为T/CECS 472-2017,自2017年10月1日起施行。
中国工程建设标准化协会
二〇一七年六月十九日

本书术语

术语 英文名称
既有混凝土结构钻切 drilling and cutting of existing concrete structures
金刚石薄壁钻头 diamond thin-wall drilling bit
金刚石圆盘锯片 diamond disk saw
金刚石串珠 diamond bead
金刚石绳锯 diamond wire saw
金刚石薄壁钻切割法 diamond thin-wall cutting method
金刚石圆盘锯切割法 diamond disk saw cutting method
金刚石绳锯切割法 diamond wire saw cutting method
干式切割 dry cutting
水下切割 underwater cutting

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称