点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 699-2020 建筑施工扣件式钢管脚手架安全技术标准 - 工标库

T/CECS 699-2020 建筑施工扣件式钢管脚手架安全技术标准 现行

发布日期:2020-05-15

实施日期:2020-11-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术语和符号

    • 2.1 术  语

    • 2.2 符  号

  • 3 构 配 件

    • 3.1 钢  管

    • 3.2 扣  件

    • 3.3 脚 手 板

    • 3.4 可调托撑

    • 3.5 悬挑脚手架用型钢

    • 3.6 脚手架用钢丝绳

  • 4 荷载及效应组合

    • 4.1 荷载分类

    • 4.2 荷载标准值

    • 4.3 荷载设计值

    • 4.4 荷载效应组合

  • 5 设计计算

    • 5.1 基本设计规定

    • 5.2 单、双排脚手架计算

    • 5.3 满堂脚手架计算

    • 5.4 满堂支撑架计算

    • 5.5 脚手架地基承载力计算

    • 5.6 型钢悬挑脚手架计算

  • 6 构造要求

    • 6.1 常用单、双排脚手架设计尺寸

    • 6.2 纵向水平杆、横向水平杆、脚手板

    • 6.3 立  杆

    • 6.4 连 墙 件

    • 6.5 门  洞

    • 6.6 剪刀撑与横向斜撑

    • 6.7 斜  道

    • 6.8 满堂脚手架

    • 6.9 满堂支撑架

    • 6.10 型钢悬挑脚手架

  • 7 施  工

    • 7.1 施工准备

    • 7.2 地基与基础

    • 7.3 搭  设

    • 7.4 拆  除

  • 8 检查与验收

    • 8.1 构配件检查与验收

    • 8.2 脚手架检查与验收

  • 9 安全管理

  • 附录A 计算用表

  • 附录B 钢管截面几何特性

  • 附录C 满堂脚手架立杆计算长度系数μ

  • 附录D 满堂支撑架立杆计算长度系数μ

  • 附录E 检查验收表

  • 附录F 施工验收记录

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Members and accessories

    • 3.1 Steel tube

    • 3.2 Coupler

    • 3.3 Ledger board

    • 3.4 Adjustable forkhead

    • 3.5 Steel shapes in cantilever scaffold

    • 3.6 Wirerope for scaffold

  • 4 Load and load combination

    • 4.1 Loads classification

    • 4.2 Normal values of loads

    • 4.3 Design values of loads

    • 4.4 Load effect combinations

  • 5 Design calculation

    • 5.1 Basic requirements

    • 5.2 Calculation for single pole and double pole scaffold

    • 5.3 Calculation for full scaffold

    • 5.4 Calculation for full formwork support

    • 5.5 Calculation for upright tube foundation bearing capacity

    • 5.6 Calculation for steel shapes cantilever scaffold

  • 6 Detailing requirements

    • 6.1 Common design dimensions of single pole and double pole scaffold

    • 6.2 Longitudinal horizontal tube,transverse horizontal tube and ledger board

    • 6.3 Upright tube

    • 6.4 Tie member

    • 6.5 Door opening

    • 6.6 Bridging and diagonal brace

    • 6.7 Inclined platform

    • 6.8 Full scaffold

    • 6.9 Full formwork support

    • 6.10 Profiled bar cantilever scaffold

  • 7 Construction

    • 7.1 Construction preparation

    • 7.2 Subgrade and foundation

    • 7.3 Installation

    • 7.4 Dismantlement

  • 8 Check and accept

    • 8.1 Check and accept for members and accessories

    • 8.2 Check and accept for scaffold

  • 9 Safety management

  • Appendix A Tables for calculation

  • Appendix B Geometrical sectional characters of the steel tube

  • Appendix C Efficient length coefficientμof upright tube in full scaffold

  • Appendix D Efficient length coefficientμof upright tube in formwork support

  • Appendix E Inspection and acceptance sheets

  • Appendix F Construction acceptance record

  • Explanation of wording in this standard

  • List of quoted standards

中国工程建设标准化协会公告

3-30-00
第605号
关于发布《建筑施工扣件式钢管脚手架安全技术标准》的公告
根据中国工程建设标准化协会《关于印发〈2017年第二批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2017〕031号)的要求,由中国建筑科学研究院有限公司、上海隧道工程有限公司等单位编制的《建筑施工扣件式钢管脚手架安全技术标准》,经本协会施工安全专业委员会组织审查,现批准发布,编号为T/CECS 699-2020,自2020年11月1日起施行。
中国工程建设标准化协会
2020年5月15日

本书术语

术语 英文名称
扣件式钢管脚手架 steel tubular scaffold with couplers
扣件式钢管作业脚手架 operation scaffold
扣件式钢管支撑脚手架 shoring scaffold
单排扣件式钢管脚手架 single pole steel tubular scaffold with couplers
双排扣件式钢管脚手架 double pole steel tubular scaffold with couplers
满堂扣件式钢管脚手架 fastener steel tube full hall scaffold
满堂扣件式钢管支撑架 fastener steel tube full hall formwork support
开口型脚手架 open scaffold
封圈型脚手架 loop scaffold
扣件 coupler

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称