中华人民共和国住房和城乡建设部公告

前言

1　总　　则

2　术　　语

3　基本规定

• 3.1　级别划分和设计标准

• 3.2　承船厢与承船车有效尺度

• 3.3　通过能力

4　选型及布置

• 4.1　形式选择

• 4.2　总体布置

• 4.3　垂直升船机布置

• 4.4　斜面升船机布置

• 4.5　上、下闸首设备布置

5　建筑物设计

• 5.1　一般规定

• 5.2　设计荷载及荷载组合

• 5.3　结构设计

• 5.4　抗震设计

6　金属结构和机械设备设计

• 6.1　一般规定

• 6.2　闸首金属结构和机械设备

• 6.3　承船厢与承船车结构

• 6.4　主提升机和牵引绞车

• 6.5　驱动系统和安全机构

• 6.6　平衡重系统

• 6.7　承船厢设备

7　电气系统设计

• 7.1　一般规定

• 7.2　供配电与接地

• 7.3　主电气传动系统

• 7.4　运行监控

• 7.5　非电量信号检测

• 7.6　通航信号与语音广播

• 7.7　图像监视

8　消防及火灾自动报警

• 8.1　一般规定

• 8.2　消　　防

• 8.3　火灾自动报警

附录A　承船厢纵倾稳定性计算

附录B　塔柱风荷载体形系数

附录C　承船厢设计工况与荷载组合

附录D　主提升机、驱动系统、牵引绞车设计工况与荷载组合

附录E　驱动电动机功率计算

本规范用词说明

引用标准名录

1　General provisions

2　Terms

3　Basic requirements

• 3.1　Project grading and design criteria

• 3.2　Effective scale of ship chamber and ship carriage

• 3.3　Navigation capacity

4　Type selection and layout

• 4.1　Type selection of shiplift

• 4.2　General layout

• 4.3　Arrangement of vertical shiplift

• 4.4　Arrangement of inclined shiplift

• 4.5　Arrangement of equipment on upper bay and lower bay

5　Civil structural design

• 5.1　General requirements

• 5.2　Design loads and load combinations

• 5.3　Structural design

• 5.4　Seismic design

6　Metal structure and machinery design

• 6.1　General requirements

• 6.2　Metal structure and mechanical equipment on bays

• 6.3　Ship chamber and inclined carriage

• 6.4　Main hoist and towing winch

• 6.5　Rack and pinion drive system and safty mechanism

• 6.6　Counterweight system

• 6.7　Ship chamber equipments

7　Electrical design

• 7.1　General requirements

• 7.2　Power supply and earthening

• 7.3　Main driving system

• 7.4　Operation monitoring

• 7.5　Non-electrical signal detection

• 7.6　Navigation signal and voice broadcast

• 7.7　Video surveillance

8　Fire-fighting facility and automatic fire alarm

• 8.1　General requirements

• 8.2　Fire facility

• 8.3　Automatic fire alarm

Appendix A　Pitch stability calculation of ship chamber shiplift

Appendix B　Shape coefficient of tower for wind load

Appendix C　Design conditions and load combinations for ship chamber

Appendix D　Design conditions and load combinations for main hoist and drive system and winch

Appendix E　Power calculation for driving motor

Explanation of wording in this code

List of quoted standards