点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
CECS 300:2011 钢结构钢材选用与检验技术规程 - 工标库

CECS 300:2011 钢结构钢材选用与检验技术规程 现行

发布日期:2011-10-19

实施日期:2012-06-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术语和符号

    • 2.1 术  语

    • 2.2 主要符号

  • 3 钢结构用钢材及其技术要求

    • 3.1 钢材牌号和标准

    • 3.2 钢材化学成分

    • 3.3 钢材力学性能

    • 3.4 钢材工艺性能

    • 3.5 钢材交货状态和订货要求

  • 4 焊接材料

  • 5 紧固件材料

    • 5.1 圆柱头焊钉(栓钉)

    • 5.2 普通螺栓

    • 5.3 高强度螺栓

  • 6 设计参数和指标

    • 6.1 钢材的抗力分项系数

    • 6.2 钢材的强度设计值和设计指标

    • 6.3 螺栓的强度和承载力设计值

    • 6.4 焊缝的强度设计值和质量等级要求

  • 7 钢材和连接材料的选用

    • 7.1 一般规定

    • 7.2 不同使用条件下钢结构选材的附加要求

    • 7.3 连接材料的选用

  • 8 钢材进场的验收和复验

    • 8.1 一般规定

    • 8.2 钢材的验收

    • 8.3 钢材的复验

    • 8.4 铸钢节点的验收和复验

    • 8.5 连接材料的验收和复验

  • 附录A 钢结构常用各牌号钢材的化学成分

  • 附录B 钢结构常用各牌号钢材的力学性能和冷弯性能

  • 附录C 铸钢件的力学性能

    • C.1 焊接结构用铸钢件

    • C.2 非焊接结构用铸钢件

  • 附录D 钢材牌号与级别的选用

  • 附录E 环境条件对钢结构的侵蚀作用分类

  • 附录F 耐候结构钢的耐腐蚀性指数

  • 附录G 焊接材料的复验

  • 本规程用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms and symblos

  • 3 Structural steels and technical requirement for steel structure

    • 3.1 Steel grade and standard

    • 3.2 Chemical composition

    • 3.3 Mechanical properties

    • 3.4 Technological properties

    • 3.5 Delivery state and order

  • 4 Welding consumables

  • 5 Fasteners

    • 5.1 Cheese head stud

    • 5.2 Bolts

    • 5.3 High strength bolts

  • 6 Design parameter

    • 6.1 Resistance factor

    • 6.2 Design value of strength and parameter

    • 6.3 Design value of strength and load-carrying capacity for bolts

    • 6.4 Design value of strength and quality grade for welding

  • 7 Selection of structural steel and connecting material

    • 7.1 General provision

    • 7.2 Additional requirement for selection of structural steel with different cases

    • 7.3 Selection of fasteners and welding consumables

  • 8 Acceptance and reinspection for structural steel

    • 8.1 General provision

    • 8.2 Acceptance for structural steel

    • 8.3 Reinspection for structural steel

    • 8.4 Acceptance and reinspection for steel casting joints

    • 8.5 Acceptance and reinspection for connection devices

  • Appendix A Chemical composition of structural steel

  • Appendix B Mechanical properties and bending test of structural steel

  • Appendix C Mechanical properties for steel castings

  • Appendix D Selection of grade and classes for structural steel

  • Appendix E Corrosive classification for steel structure

  • Appendix F Corrosion resisting index for atmospheric corrosion resisting structural steel

  • Appendix G Reinspection of welding consumables

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第94号
关于发布《钢结构钢材选用与检验技术规程》的公告
根据中国工程建设标准化协会《关于印发〈中国工程建设标准化协会2006年第一批标准制、修订项目计划〉的通知》〔建标协字(2006第12号)〕的要求,由中国钢结构协会和中冶建筑研究总院有限公司等单位编制的《钢结构钢材选用与检验技术规程》,经本协会冶金分会组织审查,现批准发布,编号为CECS 300:2011,自2012年6月1日起施行。
中国工程建设标准化协会
二〇一一年十月十九日

本书术语

术语 英文名称
碳素结构钢 carbon structural steels
低合金高强度结构钢 high strength low alloy structural steels
耐候结构钢 atmospheric corrosion resisting structural steels
圆柱头焊钉 cheese head stud
屈服强度 yield strength
抗拉强度 tensile strength
断后伸长率 percentage elongation after fracture
断面收缩率 percentage reduction of area
冲击吸收功 impact absorbed energy
屈强比 yield strengh to tensile strengh ratio

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称