SH/T 3516-2012 催化裂化装置轴流压缩机-烟气轮机能量回收机组施工及验收规范：英文

发布日期：2012-11-07

实施日期：2013-03-01

追踪收藏 VIP购买

中文目录

英文目录

中华人民共和国住房和城乡建设部公告

4-40-00

第1323号

住房城乡建设部关于发布《混凝土结构工程施工质量验收规范》等20项工程建设标准英文版的公告

该20项工程建设标准英文版由中国工程建设标准化协会统一组织出版发行。

中华人民共和国住房和城乡建设部

2016年9月30日

本书术语

中文目录

中华人民共和国住房和城乡建设部公告

Foreword

1 Scope

2 Normative References

3 General Provisions

3.1 General Requirements

3.2 Basic Requirements for the Machine Train Construction

4 Preparations for Construction

4.1 Technical Preparations

4.2 Site Preparations

4.3 Unpacking Inspection

4.4 Foundation Inspection，Re-measurement and Surface Treatment

5 Overall Installation of the Machine Train

5.1 Installation of Supporting Plates and Shims

5.2 Installation of Baseplate in Position

5.3 Installation of the Machine Train in Position

5.4 Shaft End-to-end Distance Confirmation and Shaft Alignment

5.5 The Machine Train Grouting

5.6 Coupling Assembly

6 Gearbox Assembly

7 Axial Compressor Assembly

7.1 Assembling Procedure

7.2 Axial Compressor with Bearing House and Casing Separated

7.3 Axial Compressor with Bearing House and Casing Integrated

8 Assembly and Examination of Expander

8.1 Examination Prior to Expander Assembly

8.2 Assembly of Expander

9 Assembly of Motor/Generator

10 Auxiliary Facility and Piping Installation

10.1 Auxiliary Facility Installation

10.2 Piping Connection

10.3 Oil System Flushing

11 Running Test of the Machine Train

11.1 Preparations for Running Test

11.2 Running Test of Oil System

11.3 Mechanical Running Test of the Motor and Generator

11.4 Mechanical Running Test of Gearbox

11.5 Mechanical Running Test of Axial Compressor

11.6 Mechanical Running Test of Expander

12 Technical Documents of Construction Completion

Appendix A（Informative） Technical Characteristics of the Machine Train

Appendix B（Informative） Mono-indicator Alignment

B.1 Basic Procedures of Mono-indicator Alignment

B.2 Determination of Support Adjusting Quantity by Means of Graphing Method

B.3 Determination of Support Adjusting Quantity by Means of Calculation Method

Explanation of Wording in This Code

英文目录

中华人民共和国住房和城乡建设部公告

本书术语

选择收藏夹

1　Scope

2　Normative　References

3　General　Provisions

3.1　General　Requirements

3.2　Basic　Requirements　for　the　Machine　Train　Construction

4　Preparations　for　Construction

4.1　Technical　Preparations

4.2　Site　Preparations

4.3　Unpacking　Inspection

4.4　Foundation　Inspection，Re-measurement　and　Surface　Treatment

5　Overall　Installation　of　the　Machine　Train

5.1　Installation　of　Supporting　Plates　and　Shims

5.2　Installation　of　Baseplate　in　Position

5.3　Installation　of　the　Machine　Train　in　Position

5.4　Shaft　End-to-end　Distance　Confirmation　and　Shaft　Alignment

5.5　The　Machine　Train　Grouting

5.6　Coupling　Assembly

6　Gearbox　Assembly

7　Axial　Compressor　Assembly

7.1　Assembling　Procedure

7.2　Axial　Compressor　with　Bearing　House　and　Casing　Separated

7.3　Axial　Compressor　with　Bearing　House　and　Casing　Integrated

8　Assembly　and　Examination　of　Expander

8.1　Examination　Prior　to　Expander　Assembly

8.2　Assembly　of　Expander

9　Assembly　of　Motor/Generator

10　Auxiliary　Facility　and　Piping　Installation

10.1　Auxiliary　Facility　Installation

10.2　Piping　Connection

10.3　Oil　System　Flushing

11　Running　Test　of　the　Machine　Train

11.1　Preparations　for　Running　Test

11.2　Running　Test　of　Oil　System

11.3　Mechanical　Running　Test　of　the　Motor　and　Generator

11.4　Mechanical　Running　Test　of　Gearbox

11.5　Mechanical　Running　Test　of　Axial　Compressor

11.6　Mechanical　Running　Test　of　Expander

12　Technical　Documents　of　Construction　Completion

Appendix　A（Informative）　Technical　Characteristics　of　the　Machine　Train

Appendix　B（Informative）　Mono-indicator　Alignment

B.1　Basic　Procedures　of　Mono-indicator　Alignment

B.2　Determination　of　Support　Adjusting　Quantity　by　Means　of　Graphing　Method

B.3　Determination　of　Support　Adjusting　Quantity　by　Means　of　Calculation　Method

Explanation　of　Wording　in　This　Code