点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50419-2017 煤矿巷道断面和交岔点设计规范 - 工标库

GB 50419-2017 煤矿巷道断面和交岔点设计规范 现行

发布日期:2017-05-04

实施日期:2018-01-01

替代以下标准: GB 50419-2007  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前言

  • 1 总  则

  • 2 术  语

  • 3 巷道断面形状和支护方式

    • 3.1 巷道断面形状

    • 3.2 巷道支护方式

  • 4 巷道净断面

    • 4.1 一般规定

    • 4.2 人行道

    • 4.3 巷道的净高与净宽

  • 5 锚喷支护

    • 5.1 一般规定

    • 5.2 锚喷支护类型与支护参数

    • 5.3 锚喷支护材料

  • 6 拱碹支护

    • 6.1 一般规定

    • 6.2 拱碹类型与支护参数

    • 6.3 拱碹支护材料

  • 7 金属支架支护

    • 7.1 一般规定

    • 7.2 金属支架类型与支护参数

    • 7.3 金属支架材料

  • 8 联合支护和全封闭支护

    • 8.1 联合支护

    • 8.2 全封闭支护

  • 9 巷道交岔点

    • 9.1 一般规定

    • 9.2 交岔点平面设计

    • 9.3 交岔点柱墙与墙高

    • 9.4 交岔点支护

  • 10 轨道敷设

    • 10.1 轨型与道岔

    • 10.2 道床与轨枕

    • 10.3 轨道敷设的其他要求

  • 11 水  沟

    • 11.1 水沟布置与坡度

    • 11.2 水沟断面

    • 11.3 水沟构筑与盖板

  • 12 管线敷设

    • 12.1 一般规定

    • 12.2 管线布置

    • 12.3 管线敷设方式与敷设要求

  • 13 辅助设施和铺底

    • 13.1 辅助设施

    • 13.2 铺  底

  • 附录A 构筑水沟的净断面和允许最大流量

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General regulations

  • 2 Terms

  • 3 Shapes of roadway section and supporting way

    • 3.1 Shapes of roadway section

    • 3.2 Supporting pattern of roadway

  • 4 Inner section of roadway

    • 4.1 General requirements

    • 4.2 Sidewalk

    • 4.3 Net hight and width of drift

  • 5 Bolting and shotcrete lining

    • 5.1 General requirements

    • 5.2 Types and supporting parameters of bolting and shotcrete lining

    • 5.3 Materials for bolting and shotcrete lining

  • 6 Arch lining

    • 6.1 General requirements

    • 6.2 Arch types and lining parameters

    • 6.3 Arch lining materials

  • 7 Metal supports

    • 7.1 General requirements

    • 7.2 Types of metal supports and supporting parameters

    • 7.3 Materials of metal supports

  • 8 Combined supporting and full supporting

    • 8.1 Combined supporting

    • 8.2 Full supporting

  • 9 Roadway junction

    • 9.1 General requirements

    • 9.2 Plane design for junction

    • 9.3 Prop and wall height at junction

    • 9.4 Junction supping

  • 10 Track laying

    • 10.1 Rail and turnout

    • 10.2 Track bed sleepers

    • 10.3 Other requirements for track laying

  • 11 Water ditch

    • 11.1 Water ditch layout and slope

    • 11.2 Section of water ditch

    • 11.3 Water ditch construct and cover

  • 12 Pipeline laying

    • 12.1 General requirements

    • 12.2 Pipeline layout

    • 12.3 Method and requirement of pipeline laying

  • 13 Auxiliary facilities and paving

    • 13.1 Auxiliary facilities

    • 13.2 Paving

  • Appendix A net section of water ditch and allowable maximum flow

  • Explanation of wording in this code

  • List of quoted standards

中华人民共和国住房和城乡建设部公告

4-4 0-0 0
第1545号
住房城乡建设部关于发布国家标准《煤矿巷道断面和交岔点设计规范》的公告
现批准《煤矿巷道断面和交岔点设计规范》为国家标准,编号为GB 50419—2017,自2018年1月1日起实施。其中,第3.2.94.1.1(1、2、3)、4.2.14.2.24.2.34.3.212.1.112.2.112.2.212.2.4(2)、12.2.712.2.812.2.912.3.312.3.4条(款)为强制性条文,必须严格执行。原国家标准《煤矿巷道断面和交岔点设计规范》GB 50419—2007同时废止。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2017年5月4日

本书术语

术语 英文名称
巷道断面 section of drift;section of roadway
巷道净断面 inner section of drift;inner section of roadway
人行道 sidewalk;man way
全封闭支护 full supporting
巷道辅助设施 auxiliary installation of drift;auxiliary facilities of drift
轮廓标 delineator

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称