点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50215-2015 煤炭工业矿井设计规范 - 工标库

GB 50215-2015 煤炭工业矿井设计规范 现行

发布日期:2015-09-30

实施日期:2016-03-01

替代以下标准: GB 50215-2005  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前言

  • 1 总则

  • 2 矿井资源/储量、设计生产能力和服务年限

    • 2.1 矿井资源/储量

    • 2.2 矿井设计生产能力和服务年限

  • 3 井田开拓

    • 3.1 井田开拓方式

    • 3.2 井口位置与开采水平划分

    • 3.3 开拓巷道布置

    • 3.4 开采顺序与采区划分

  • 4 井筒、井底车场及硐室

    • 4.1 井筒

    • 4.2 井底车场

    • 4.3 主要硐室

  • 5 井下开采

    • 5.1 采区布置

    • 5.2 采煤方法及工艺

    • 5.3 采区巷道布置

    • 5.4 巷道掘进与掘进机械化

  • 6 井下运输

    • 6.1 一般规定

    • 6.2 煤炭运输

    • 6.3 辅助运输

    • 6.4 运输设备与车辆配备

  • 7 通风与安全

    • 7.1 通风

    • 7.2 瓦斯抽采

    • 7.3 井下灾害防治

    • 7.4 井下热害防治

    • 7.5 井下紧急避险系统

  • 8 矿井主要固定设备

    • 8.1 提升设备

    • 8.2 通风设备

    • 8.3 排水设备

    • 8.4 压缩空气设备

    • 8.5 抽采瓦斯设备

    • 8.6 注氮设备

  • 9 地面生产系统

    • 9.1 一般规定

    • 9.2 井口布置

    • 9.3 井口受煤仓

    • 9.4 筛分、选矸与破碎

    • 9.5 带式输送机运输

    • 9.6 储存与装车

    • 9.7 计量与煤质检查

    • 9.8 矸石和脏杂煤处理

    • 9.9 矿井修理车间、无轨胶轮车库及木材加工房

  • 10 总平面布置

    • 10.1 矿井地面总布置

    • 10.2 工业场地总平面布置

    • 10.3 防洪及竖向设计

    • 10.4 场内运输

    • 10.5 管线综合布置

  • 11 地面运输

    • 11.1 一般规定

    • 11.2 标准轨距铁路

    • 11.3 场外道路

  • 12 供配电

    • 12.1 一般规定

    • 12.2 供电电源

    • 12.3 电压和电能质量

    • 12.4 电力负荷

    • 12.5 地面配电

    • 12.6 井下配电

    • 12.7 照明

    • 12.8 防雷、过电压保护和接地

  • 13 信息与自动化

    • 13.1 一般规定

    • 13.2 监控及自动化

    • 13.3 计算机网络

    • 13.4 信息管理

    • 13.5 通信

    • 13.6 信号

  • 14 地面建筑

    • 14.1 一般规定

    • 14.2 主要工业建筑物与构筑物

    • 14.3 建筑面积

  • 15 给水排水与供热通风

    • 15.1 水源

    • 15.2 给水排水

    • 15.3 井下消防洒水

    • 15.4 供热通风

    • 15.5 矿井井筒防冻

    • 15.6 锅炉房

    • 15.7 燃气供应

  • 16 节能减排与综合利用

    • 16.1 一般规定

    • 16.2 井田开拓与开采

    • 16.3 矿井主要设备

    • 16.4 安全设施节能

    • 16.5 电气节能

    • 16.6 地面生产系统节能

    • 16.7 建筑、总图及地面运输节能

    • 16.8 给水排水及暖通节能

    • 16.9 环保设施节能

    • 16.10 新能源

    • 16.11 能源计量及能耗指标

    • 16.12 综合利用

  • 17 环境保护

    • 17.1 一般规定

    • 17.2 污染防治

    • 17.3 生态保护

  • 18 建井工期

    • 18.1 移交标准

    • 18.2 施工进度

    • 18.3 建井工期

  • 附录A 固体矿产资源分类

  • 附录B 煤炭资源量估算指标

  • 附录C 矿井初步可行性研究、可行性研究和初步设计资源/储量分类及计算

    • C.1 矿井初步可行性研究以详查地质报告为基础的资源/储量分类及计算

    • C.2 矿井初步可行性研究以勘探地质报告为基础的资源/储量分类及计算

  • 附录D 建议的资源/储量比例

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Mine resources/reserves,designed production

    • 2.1 Mine resources/reserves

    • 2.2 Mine designed production capacity and service life

  • 3 Minefield development

    • 3.1 Development mode

    • 3.2 Shaft location and division of mining levels

    • 3.3 Layout of development roadways

    • 3.4 Mining sequence and division of mining districts

  • 4 Shaft,shaft bottom and chambers

    • 4.1 Shaft

    • 4.2 Shaft bottom

    • 4.3 Main chambers

  • 5 Underground mining

    • 5.1 Layout of mining district

    • 5.2 Mining method and technology

    • 5.3 Layout of roads in mining districts

    • 5.4 Roadway drivage and its mechanization

  • 6 Underground transportation

    • 6.1 General requirements

    • 6.2 Coal transportation

    • 6.3 Auxiliary transportation

    • 6.4 Transportation equipment and vehicle allocation

  • 7 Ventilation and safety

    • 7.1 Ventilation

    • 7.2 Gas aspiration

    • 7.3 Underground fire prevention

    • 7.4 Prevention of mine heat damage

    • 7.5 Underground emergency refuge system

  • 8 Main mine fixed equipment

    • 8.1 Hoisting equipment

    • 8.2 Ventilation equipment

    • 8.3 Dewatering equipment

    • 8.4 Air compressing equipment

    • 8.5 Gas aspiration equipment

    • 8.6 Nitrogen injection equipment

  • 9 Surface production system

    • 9.1 General requirements

    • 9.2 Shaft head layout

    • 9.3 Shaft head coal bunker

    • 9.4 Screening,rock pick out and crushing

    • 9.5 Belt conveyor transportation

    • 9.6 Storage and loading

    • 9.7 Weighing and coal quality inspection

    • 9.8 Disposal of rock and dirty coal

    • 9.9 Mine repairing work shop and timber processing room

  • 10 General layout

    • 10.1 Mine surface general layout

    • 10.2 Industrial compound plan layout

    • 10.3 Flood control and vertical design

    • 10.4 Inside transportation

    • 10.5 Comprehensive layout of pipelines

  • 11 Surface transportation

    • 11.1 General requirements

    • 11.2 Railway with standard gauge

    • 11.3 Outside roads

  • 12 Power supply and distribution

    • 12.1 General requirements

    • 12.2 Power supply source

    • 12.3 Voltage and electric power quality

    • 12.4 Electric load

    • 12.5 Surface power distribution

    • 12.6 Underground power distribution

    • 12.7 Lighting

    • 12.8 Lightning protection,overvoltage protection

  • 13 Information and automation

    • 13.1 General requirements

    • 13.2 Monitoring and automation

    • 13.3 Computer network

    • 13.4 Information management

    • 13.5 Communication

    • 13.6 Signaling

  • 14 Surface structure

    • 14.1 General requirements

    • 14.2 Main industrial buildings and structures

    • 14.3 Construction area

  • 15 Water supply,water drainage,heat supply and

    • 15.1 Water sources

    • 15.2 Water supply and drainage

    • 15.3 Underground fire fighting water spray

    • 15.4 Heat supply and ventilation

    • 15.5 Mine shaft freeze-proof

    • 15.6 Boiler room

    • 15.7 Mine gas utilization and fuel gas

  • 16 Energy saving and emission reduction

    • 16.1 General requirements

    • 16.2 Minefield development and mining

    • 16.3 Main mine equipment

    • 16.4 Energy saving of safety facilities

    • 16.5 Electric energy saving

    • 16.6 Energy saving of surface production system

    • 16.7 Energy saving of architecture and generallay out and

    • 16.8 Energy saving of water supply and drainage,heating

    • 16.9 Energy saving of environment facilities

    • 16.10 New energy sources

    • 16.11 Energy measuring and consumption index

    • 16.12 Comprehensive utilization

  • 17 Environment protection

    • 17.1 General requirements

    • 17.2 Pollution control

    • 17.3 Ecological protection

  • 18 Construction period

    • 18.1 Standard of turn-over

    • 18.2 Construction progress

    • 18.3 Construction period

  • Appendix A Classification of solid mineral resources

  • Appendix B Coal resources/reserves estimation index

  • Appendix C Classification and calculation of resources/

  • Appendix D Proposed ratio of resources/reserves

  • Explanation of wording in this code

  • List of quoted standards

中华人民共和国住房和城乡建设部公告

4-5 0-0 0
第925号
住房城乡建设部关于发布国家标准《煤炭工业矿井设计规范》的公告
现批准《煤炭工业矿井设计规范》为国家标准,编号为GB 50215-2015,自2016年3月1日起实施。其中,第2.1.42.1.53.1.6(3、4)、3.3.43.3.73.3.9(1)、4.1.3(3)、4.1.4(3)、4.1.7(2)、4.2.2(2)、4.3.2(2)、5.2.65.3.3(1、2)、5.3.45.3.7(1)、6.3.67.1.17.2.17.2.2(1)、7.2.47.3.17.3.27.3.3(1、2)、7.3.47.3.57.4.78.1.38.1.48.1.58.1.6(1)、8.1.78.2.18.2.5(1)、8.3.1(1)、8.3.2(1)、8.3.88.4.1(4)、8.4.3(6)、8.5.19.2.29.2.59.2.69.5.4(4)、9.5.69.5.710.1.8(1、2)、10.2.8(1)、10.2.9(2、3)、10.2.2010.2.23(2)、10.3.1(1、3)、12.2.212.4.112.5.312.6.312.6.813.2.313.2.713.2.12、13.2.1613.5.113.5.1013.5.12(1、2、3、4)、13.5.1313.5.1413.6.1(1、2、3、4、5、6)、13.6.213.6.313.6.714.1.614.1.7(2、5)、15.1.1(5)、15.2.315.2.615.2.915.3.115.3.317.2.1条(款)为强制性条文,必须严格执行。原国家标准《煤炭工业矿井设计规范》GB 50215-2005同时废止。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2015年9月30日

本书术语

术语 英文名称

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称