点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1568-2024 对穿螺栓多腔钢管组合墙结构技术规程 - 工标库

T/CECS 1568-2024 对穿螺栓多腔钢管组合墙结构技术规程 现行

发布日期:2024-03-12

实施日期:2024-08-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 材料

    • 3.1 钢带和钢板

    • 3.2 型材

    • 3.3 对穿螺栓

    • 3.4 焊接材料

    • 3.5 混凝土和钢筋

    • 3.6 锚栓和预埋件

    • 3.7 连接用紧固标准件

    • 3.8 钢结构防护材料

  • 4 结构设计基本规定

    • 4.1 一般规定

    • 4.2 构件承载力设计

    • 4.3 结构变形和舒适度要求

  • 5 结构计算分析

  • 6 对穿螺栓多腔钢管组合墙设计

    • 6.1 一般规定

    • 6.2 对穿螺栓多腔钢管组合墙承载力计算

    • 6.3 一字形对穿螺栓多腔钢管组合墙稳定计算

    • 6.4 三边和四边支承墙肢稳定计算

    • 6.5 构造

  • 7 节点设计

    • 7.1 一般规定

    • 7.2 对穿螺栓多腔钢管组合墙对接节点

    • 7.3 对穿螺栓多腔钢管组合墙墙脚节点

    • 7.4 钢梁与对穿螺栓多腔钢管组合墙连接节点

    • 7.5 楼板与对穿螺栓多腔钢管组合墙连接节点

    • 7.6 对穿螺栓与建筑其他系统连接

  • 8 防护设计

    • 8.1 防腐设计

    • 8.2 抗火设计

  • 9 制作和施工

    • 9.1 一般规定

    • 9.2 对穿螺栓多腔钢管墙制作

    • 9.3 对穿螺栓多腔钢管组合墙结构施工

    • 9.4 防护施工

  • 10 验收

    • 10.1 一般规定

    • 10.2 零部件加工工程

    • 10.3 对穿螺栓多腔钢管墙组装工程

    • 10.4 锚栓和预埋件

    • 10.5 对穿螺栓多腔钢管墙安装

    • 10.6 腔内混凝土工程

    • 10.7 主体结构

    • 10.8 防护工程

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Materials

    • 3.1 Steel

    • 3.2 Steel profile

    • 3.3 Tie-bolt

    • 3.4 Connection materials

    • 3.5 Concrete and steel reinforcement

    • 3.6 Anchor bolts and embedded parts

    • 3.7 Fastening standard parts for connection

    • 3.8 Protection materials of steel

  • 4 Basic requirements of structrual design

    • 4.1 General requirements

    • 4.2 Capacity of structural members

    • 4.3 Limits of horizontal displacement and requirements of comfort degree

  • 5 Structural analysis

  • 6 Design of concrete filled multi-chamber tube walls with tie-bolts

    • 6.1 General requirements

    • 6.2 Strength calculation of CF-MCTWs

    • 6.3 Stability calculation of I-shaped CF-MCTWs

    • 6.4 Stability calculation of CF-MCTWs with 3 sides and 4 sides supported

    • 6.5 Detailing requirements

  • 7 Design of joints

    • 7.1 General requirements

    • 7.2 Splice joint of CF-MCTWs

    • 7.3 Base joint of CF-MCTWs

    • 7.4 Connection joint of beam to CF-MCTWs

    • 7.5 Connection joint of concrete slab to CF-MCTWs

    • 7.6 Connection of tie-bolts with interior,exterior furnishing and MEP elements

  • 8 Desing of protection

    • 8.1 Corrosion prevention design

    • 8.2 Fire-resistance design

  • 9 Fabrication and construction

    • 9.1 General requirements

    • 9.2 Fabrication of MCTWs

    • 9.3 Construction of CF-MCTWs

    • 9.4 Protective construction of CF-MCTWs

  • 10 Acceptance

    • 10.1 General requirements

    • 10.2 Manufacture of components

    • 10.3 Assembly of MCTWs

    • 10.4 Anchor bolts and embedded parts

    • 10.5 Installation of MCTWs

    • 10.6 Concrete pouring in multi-chamber tube

    • 10.7 Main structures

    • 10.8 Protection engineering

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告

5-50-00
第1920号
关于发布《对穿螺栓多腔钢管组合墙结构技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2021年第二批协会标准制订、修订计划〉的通知》(建标协字〔2021〕20号)的要求,由浙江越宫钢结构有限公司、浙江大学等单位编制的《对穿螺栓多腔钢管组合墙结构技术规程》,经本协会钢结构专业委员会组织审查,现批准发布,编号为T/CECS 1568-2024,自2024年8月1日起施行。
中国工程建设标准化协会
2024年3月12日

本书术语

术语 英文名称
矩形钢管 rectangular steel tube
对穿螺栓 tie-bolt
窄翼缘槽钢 channel with narrow flanges
窄翼缘槽钢组件 component built-up by narrow flange channels with tie-bolts
对穿螺栓多腔钢管墙 multi-chamber tube wall with tiebolts(MCTW)
腔内分隔肋 steel plate element between cells
腔内混凝土 infilled concrete
对穿螺栓多腔钢管组合墙 concrete filled multi-chamber tube wall with tie-bolts(CF-MCTW)
对穿螺栓多腔钢管组合墙结构 structures composed of CF-MCTWs,steel beams,columns and slabs
混凝土工作承担系数 percentage of load-carrying capacity shared by concrete

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称