点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 825-2021 矩形钢管混凝土组合异形柱结构技术规程 - 工标库

T/CECS 825-2021 矩形钢管混凝土组合异形柱结构技术规程 现行

发布日期:2021-03-08

实施日期:2021-08-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总  则

  • 2 术语与符号

    • 2.1 术  语

    • 2.2 符  号

  • 3 基本规定

  • 4 建筑设计

    • 4.1 一般规定

    • 4.2 平面与立面设计

    • 4.3 外围护墙

    • 4.4 隔墙与顶棚

    • 4.5 装配式部品部件

  • 5 结构设计

    • 5.1 一般规定

    • 5.2 结构体系及构造

    • 5.3 结构平面和竖向布置

    • 5.4 结构计算

    • 5.5 构件设计

    • 5.6 楼板设计

    • 5.7 节点设计

    • 5.8 基础设计

  • 6 构件制作与涂装

    • 6.1 一般规定

    • 6.2 材  料

    • 6.3 钢构件制作

    • 6.4 防护涂装

  • 7 施工与验收

    • 7.1 构件运输与吊装

    • 7.2 混凝土浇筑

    • 7.3 构件防护

    • 7.4 围护结构安装

    • 7.5 安装与验收

  • 附录A 矩形钢管混凝土组合异形柱构件安装检验批质量验收记录表

  • 本规程用词说明

  • 引用标准名录

英文目录

  • 1 General provision

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Architectural design

    • 4.1 General requirements

    • 4.2 Plane and facade design

    • 4.3 Exterior enclosure wall

    • 4.4 Partition wall and ceiling

    • 4.5 Fabricated parts

  • 5 Structural design

    • 5.1 General requirements

    • 5.2 Structural system and structure

    • 5.3 Plane and vertical layout of the structure

    • 5.4 Structural calculation

    • 5.5 Component design

    • 5.6 Floor design

    • 5.7 Joint design

    • 5.8 Foundation design

  • 6 Fabrication and coating of components

    • 6.1 General requirements

    • 6.2 Materials

    • 6.3 Fabrication of steel member

    • 6.4 Protective coating

  • 7 Construction and acceptance

    • 7.1 Transportation and lifting of components

    • 7.2 Pouring of concrete

    • 7.3 Component protection

    • 7.4 Enclosure installation

    • 7.5 Installation and acceptance

  • Appendix A Records of inspection special-shaped column composed of rectangular concrete filled steel tubes for guality acceptance

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第801号
关于发布《矩形钢管混凝土组合异形柱结构技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2017年第一批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2017〕014号)的要求,由天津大学、大元建业集团股份有限公司等单位编制的《矩形钢管混凝土组合异形柱结构技术规程》,经本协会轻型钢结构专业委员会组织审查,现批准发布,编号为T/CECS 825-2021,自2021年8月1日起施行。
中国工程建设标准化协会
2021年3月8日

本书术语

术语 英文名称
矩形钢管混凝土构件 rectangular concrete-filled steel tube member
矩形钢管混凝土组合异形柱 special-shaped column composed of rectangular concrete filled steel tubes
矩形钢管混凝土组合异形柱结构 structure with special-shaped columns composed of rectangular concrete filled steel tubes
组合异形柱框架结构 frame structure with specialshaped columns
组合异形柱框架-剪力墙结构 frame-shear wall structure with special-shaped columns
单板连接板 single steel plates
双板连接板 double steel plates
混凝土的工作承担系数 percentage of load-carrying capacity shared by core concrete
组合异形柱建筑 building with special-shaped column
外肋环板节点 vertical stiffener joint

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称