点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1725-2024 剪拉综合法检测混凝土抗压强度技术规程 - 工标库

T/CECS 1725-2024 剪拉综合法检测混凝土抗压强度技术规程 现行

发布日期:2024-10-10

实施日期:2025-03-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告 第2157号

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 基本规定

  • 4 检测设备

    • 4.1 取样设备

    • 4.2 剪拉设备

    • 4.3 几何测量设备

    • 4.4 校准、核查与保养

  • 5 检测技术

    • 5.1 取样要求

    • 5.2 试件钻取

    • 5.3 剪拉试验

  • 6 抗压强度换算与推定

    • 6.1 剪拉几何平均强度值计算

    • 6.2 抗压强度换算与推定

  • 附录A 地区和专用测强曲线的制定

  • 附录B 剪拉综合法检测混凝土抗压强度测强曲线验证方法

  • 附录C 剪拉综合法检测记录表

  • 附录D 剪拉几何平均强度值与混凝土抗压强度换算表

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Testing equipments

    • 4.1 Sampling equipments

    • 4.2 Shearing-pulling equipments

    • 4.3 Geometric measurement equipments

    • 4.4 Calibration and maintenance

  • 5 Testing technology

    • 5.1 Sampling requirements

    • 5.2 Sample drilling

    • 5.3 Shearing-pulling test

  • 6 Compressive strength conversion and estimation

    • 6.1 Calculation of geometric mean strength value of shearing-pulling test

    • 6.2 Strength conversion and estimation

  • Appendix A Define of regional and special strength conversion curve

  • Appendix B Verification of strength conversion curve tested by comprehensive shearing-pulling method

  • Appendix C Testing record table for comprehensive shearing-pulling method

  • Appendix D Conversion table of geometric mean strength value of shearing-pulling-lest and compressive strength

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告 第2157号

5-50-00
关于发布《剪拉综合法检测混凝土抗压强度技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2020年第一批协会标准制订、修订计划〉的通知》(建标协字〔2020〕14号)的要求,由中国建筑科学研究院有限公司、廊坊市阳光建设工程质量检测有限公司等单位编制的《剪拉综合法检测混凝土抗压强度技术规程》,经协会混凝土结构专业委员会组织审查,现批准发布,编号为T/CECS 1725-2024,自2025年3月1日起施行。
中国工程建设标准化协会
二〇二四年十月十日

本书术语

术语 英文名称
剪拉综合法 comprehensive shearing-pulling method
剪拉试件 specimen for shearing-pulling test
剪切试验 shearing test
拉拔试验 pulling test
剪拉几何平均强度值 geometric mean strength value of shearing-pulling test
混凝土抗压强度换算值 conversion value of concrete compressive strength
混凝土抗压强度推定值 estimated value of concrete compressive strength

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称