点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50309-2017 工业炉砌筑工程质量验收标准 - 工标库

GB 50309-2017 工业炉砌筑工程质量验收标准 现行

发布日期:2017-09-27

实施日期:2018-05-01

替代以下标准: GB 50309-2007  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前言

  • 1 总 则

  • 2 术 语

  • 3 基本规定

  • 4 质量验收的划分、程序及组织

    • 4.1 质量验收的划分

    • 4.2 质量验收

    • 4.3 质量验收的程序及组织

  • 5 砌筑质量的验收规定

    • 5.1 底和墙

    • 5.2 拱顶

    • 5.3 管道

  • 6 不定形耐火材料

    • 6.1 耐火浇注料

    • 6.2 耐火可塑料

    • 6.3 耐火捣打料

    • 6.4 耐火喷涂料

    • 6.5 耐火压浆料

  • 7 耐火陶瓷纤维

    • 7.1 层铺式内衬

    • 7.2 叠砌式内衬

    • 7.3 折叠式模块

  • 8 高炉及其附属设备

    • 8.1 一般规定

    • 8.2 高炉炉底

    • 8.3 高炉炉缸

    • 8.4 高炉炉腹及其以上部位

    • 8.5 热风炉炉底、炉墙

    • 8.6 热风炉砖格子

    • 8.7 热风炉炉顶

    • 8.8 热风管道

  • 9 焦炉及干熄焦设备

    • 9.1 一般规定

    • 9.2 焦炉基础平台砌体

    • 9.3 焦炉蓄热室

    • 9.4 焦炉斜烟道

    • 9.5 焦炉炭化室

    • 9.6 焦炉炉顶

    • 9.7 熄焦室冷却段

    • 9.8 熄焦室斜风道

    • 9.9 熄焦室预存段

    • 9.10 一次除尘器底、墙

    • 9.11 一次除尘器拱顶

    • 9.12 二次除尘器

  • 10 炼钢炉及相关设备

    • 10.1 转炉

    • 10.2 电炉

    • 10.3 钢液真空循环脱气法(RH)精炼炉

    • 10.4 混铁炉

    • 10.5 混铁车

    • 10.6 钢水罐

  • 11 加热炉、热处理炉和退火炉

    • 11.1 一般规定

    • 11.2 加热炉和热处理炉

    • 11.3 退火炉

  • 12 闪速炉、艾萨炉、回转熔炼炉、矿热电炉、卧式转炉、固定式精炼炉和回转式精炼炉

    • 12.1 闪速炉

    • 12.2 艾萨炉

    • 12.3 回转熔炼炉

    • 12.4 矿热电炉

    • 12.5 卧式转炉

    • 12.6 固定式精炼炉

    • 12.7 回转式精炼炉

  • 13 铝电解槽

    • Ⅰ 主控项目

    • Ⅱ 一般项目

  • 14 炭素煅烧炉和炭素焙烧炉

    • 14.1 炭素煅烧炉

    • 14.2 炭素焙烧炉

  • 15 玻璃窑炉

    • Ⅰ 主控项目

    • Ⅱ 一般项目

  • 16 回转窑、石灰竖窑及其附属设备

    • 16.1 回转窑及其附属设备

    • 16.2 套筒石灰竖窑

    • 16.3 双膛石灰竖窑

  • 17 隧道窑和辊道窑

    • 17.1 隧道窑

    • 17.2 辊道窑

  • 18 转化炉和裂解炉

    • 18.1 一段转化炉和裂解炉

    • 18.2 二段转化炉

  • 19 工业锅炉

    • Ⅰ 主控项目

    • Ⅱ 一般项目

  • 附录A 检验批质量验收记录

  • 附录B 分项工程质量验收记录

  • 附录C 分部(子分部)工程质量验收记录

  • 附录D 质量保证资料核查记录

  • 附录E 单位(子单位)工程质量竣工验收记录

  • 附录F 检验器具表

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

  • 4 Division,procedure and organization of quality inspection and acceptance

    • 4.1 Division of quality inspection and acceptance

    • 4.2 Inspection and acceptance of quality

    • 4.3 Procedure and organization of quality inspection and acceptance

  • 5 Provisions for quality inspection and acceptance

    • 5.1 Bottom and wall

    • 5.2 Arch roof

    • 5.3 Pipe

  • 6 Unshaped refractories

    • 6.1 Castable refractories

    • 6.2 Plastic refractories

    • 6.3 Ramming refractories

    • 6.4 Spraying refractories

    • 6.5 Injection refractories

  • 7 Refractory ceramic fiber

    • 7.1 Layer lining

    • 7.2 Stacked lining

    • 7.3 Foldable module

  • 8 Blast furnace and accessory equipments

    • 8.1 General requirements

    • 8.2 Blast furnace bottom

    • 8.3 Blast furnace hearth

    • 8.4 Blast furnace bosh and parts above it

    • 8.5 Hot stove bottom and wall

    • 8.6 Hot stove checker

    • 8.7 Hot stove top

    • 8.8 Hot blast pipe

  • 9 Coke oven and coke dry quenching equipment

    • 9.1 General requirements

    • 9.2 Coke oven foundation top plate

    • 9.3 Coke oven regenerative chamber

    • 9.4 Coke oven corbel zone

    • 9.5 Coke oven coking chamber

    • 9.6 Coke oven top

    • 9.7 Cooling zone of quenching chamber

    • 9.8 Flue part of quenching chamber

    • 9.9 Pre-store zone of quenching chamber

    • 9.10 Bottom and wall of the first dust catcher

    • 9.11 Arch roof of the first dust catcher

    • 9.12 The second dust catcher

  • 10 Steelmaking furnaces and associated equipments

    • 10.1 Converter

    • 10.2 Electric arc furnace

    • 10.3 RH refining furnace

    • 10.4 Mixer furnace

    • 10.5 Torpedo car

    • 10.6 Ladle

  • 11 Heating furnace, heat-treating furnaceand annealing furnace

    • 11.1 General requirements

    • 11.2 Heating furnace and heat-treating furnace

    • 11.3 Annealing furnace

  • 12 Flash furnace, Isa furnace,rotary smelting furnace,submerged arc furnace, horizontal converter,fixed refining furnace and rotary refining furnace

    • 12.1 Flash furnace

    • 12.2 Isa furnace

    • 12.3 Rotary smelting furnace

    • 12.4 Submerged arc furnace

    • 12.5 Horizontal converter

    • 12.6 Fixed refining furnace

    • 12.7 Rotary refining furnace

  • 13 Aluminum cell

  • 14 Carbon calcining furnace and carbon roasting furnace

    • 14.1 Carbon calcining furnace

    • 14.2 Carbon roasting furnace

  • 15 Glass furnace

  • 16 Rotary kiln, shaft lime kiln and accessory equipments

    • 16.1 Rotary kiln and accessory equipments

    • 16.2 Sleeve shaft lime kiln

    • 16.3 Double hearth shaft lime kiln

  • 17 Tunnel kiln and roller hearth kiln

    • 17.1 Tunnel kiln

    • 17.2 Roller hearth kiln

  • 18 Reformer and cracking furnace

    • 18.1 Primary reformer and cracking furnace

    • 18.2 Secondary reformer

  • 19 Industrial boiler

  • Appendix A Records of the inspection lots for quality acceptance

  • Appendix B Records of the sub-item projects for quality acceptance

  • Appendix C Records of the subsection(sub-branch) projects for quality acceptance

  • Appendix D Inspection records of quality assurance data

  • Appendix E Final records of the unit(sub-unit)projects for quality acceptance

  • Appendix F Lists of inspection instruments

  • Explanation of wording in this code

  • List of quoted standards

中华人民共和国住房和城乡建设部公告

4-41-10
第1692号
住房城乡建设部关于发布国家标准《工业炉砌筑工程质量验收标准》的公告
现批准《工业炉砌筑工程质量验收标准》为国家标准,编号为GB 50309—2017,自2018年5月1日起实施。其中,第4.2.65.2.46.1.59.6.312.1.5条为强制性条文,必须严格执行。原《工业炉砌筑工程质量验收规范》GB 50309—2007同时废止。
本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2017年9月27日

本书术语

术语 英文名称
反拱 inverted arch
拱脚砖 arch quoin brick
显裂纹 open cracks
合门砖 lock door brick
空缝 hollow brick seam
滑动缝 sliding joint
错牙 surface unevenness
错台 slab staggering
退台 terrace-backwards

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称