点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1616-2024 装配整体式双向密肋空心叠合楼盖技术规程 - 工标库

T/CECS 1616-2024 装配整体式双向密肋空心叠合楼盖技术规程 现行

发布日期:2024-05-28

实施日期:2024-10-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 基本规定

  • 4 材料

    • 4.1 混凝土

    • 4.2 钢筋及相关材料

    • 4.3 箱型填充体

    • 4.4 其他

  • 5 结构设计

    • 5.1 一般规定

    • 5.2 结构布置

    • 5.3 空心叠合楼盖计算与验算

    • 5.4 预制底板短暂设计状况验算

    • 5.5 空心叠合板构造

    • 5.6 预制底板构造

    • 5.7 接缝及支座构造

  • 6 预制底板生产与运输

    • 6.1 一般规定

    • 6.2 原材料及配件

    • 6.3 模具

    • 6.4 钢筋

    • 6.5 混凝土

    • 6.6 脱模、翻转、吊运与标识

    • 6.7 运输与堆放

    • 6.8 构件检验

  • 7 施工

    • 7.1 一般规定

    • 7.2 安装准备

    • 7.3 底板安装

    • 7.4 钢筋连接与箱型填充体安装

    • 7.5 混凝土浇筑

  • 8 质量验收

    • 8.1 一般规定

    • 8.2 箱型填充体进场验收

    • 8.3 预制底板进场验收

    • 8.4 空心叠合板质量验收

  • 附录A 箱型填充体检验方法

    • A.1 外观及尺寸允许偏差检验

    • A.2 物理力学性能检验

    • A.3 箱型填充体进场验收记录

  • 附录B 空心叠合板自重、折实厚度、体积空心率计算

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Materials

    • 4.1 Concrete

    • 4.2 Reinforcement and related materials

    • 4.3 Filler of box shape

    • 4.4 Other

  • 5 Structural design

    • 5.1 General requirements

    • 5.2 Structural layout requirements

    • 5.3 Calculation and verification of hollow composite slabs

    • 5.4 Calculation and verification of temporary design conditions for precast plates

    • 5.5 Construction requirements of hollow composite slabs

    • 5.6 Construction requirements of precast plates

    • 5.7 Construction requirements of joint and support

  • 6 Manufacturing and transportation of precast plates

    • 6.1 General requirements

    • 6.2 Raw materials and fitting

    • 6.3 Moulds

    • 6.4 Reinforcement

    • 6.5 Concrete

    • 6.6 Demolding,flipping,lifting and identification

    • 6.7 Transportation and storage

    • 6.8 Testing of precast plates

  • 7 Construction

    • 7.1 General requirements

    • 7.2 Construction preparation

    • 7.3 Erection and connection of precast plates

    • 7.4 Reinforcement connection and installation of filler of box shape

    • 7.5 Concrete pouring

  • 8 Quality acceptance

    • 8.1 General requirements

    • 8.2 Entry inspection of filler of box shape

    • 8.3 Entry inspection of precast plates

    • 8.4 Quality acceptance of hollow composite slabs

  • Appendix A Inspection method of filler of box shape

  • Appendix B Calculations of weight,converted thickness and volumetric void ratio of hollow composite slabs

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告

5-50-00
第2007号
关于发布《装配整体式双向密肋空心叠合楼盖技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2023年第一批协会标准制订、修订计划〉的通知》(建标协字〔2023〕10号)的要求,由山东省建筑设计研究院有限公司、山东世家远大科技发展有限公司等单位编制的《装配整体式双向密肋空心叠合楼盖技术规程》,经本协会建筑产业化分会组织审查,现批准发布,编号为T/CECS 1616-2024,自2024年10月1日起施行。
中国工程建设标准化协会
2024年5月28日

本书术语

术语 英文名称
装配整体式双向密肋空心叠合板 monolithic hollow composite slab with two-way rib
装配整体式双向密肋空心叠合楼盖 monolithic hollow composite floor with two-way rib
双向带肋预制底板 two-way ribbed precast plate
箱型填充体 filler of box shape
上翼缘板 upper flange
下翼缘板 bottom flange
肋梁 rib
叠合肋梁 composite rib
后浇肋梁 post-cast rib
双向整体式接缝 two-way monolithic gap

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称