点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB/T 50484-2019 石油化工建设工程施工安全技术标准 - 工标库

GB/T 50484-2019 石油化工建设工程施工安全技术标准 现行

发布日期:2019-07-10

实施日期:2019-12-01

替代以下标准: GB 50484-2008  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前 言

  • 1 总 则

  • 2 术 语

  • 3 通用规定

    • 3.1 现场管理

    • 3.2 施工环境保护

    • 3.3 施工动火作业

    • 3.4 受限空间作业

    • 3.5 高处作业

    • 3.6 季节性施工

  • 4 临时用电及临建设施

    • 4.1 用电管理

    • 4.2 变配电及自备电源

    • 4.3 配电线路

    • 4.4 配电箱

    • 4.5 接地与接零

    • 4.6 照明用电

    • 4.7 临建设施

  • 5 起重作业

    • 5.1 一般规定

    • 5.2 吊索具

    • 5.3 卷扬机作业

    • 5.4 流动式起重机作业

    • 5.5 塔式起重机作业

    • 5.6 桥式/门式起重机作业

    • 5.7 液压吊装系统作业

    • 5.8 装卸与运输作业

  • 6 脚手架作业

    • 6.1 一般规定

    • 6.2 脚手架用料

    • 6.3 搭设、使用、拆除

    • 6.4 特殊形式脚手架

  • 7 土建作业

    • 7.1 土石方作业

    • 7.2 基坑支护与降排水

    • 7.3 桩基作业

    • 7.4 强夯作业

    • 7.5 沉井作业

    • 7.6 钢筋作业

    • 7.7 模板作业

    • 7.8 混凝土作业

    • 7.9 砌筑作业

    • 7.10 防水、防腐作业

  • 8 安装作业

    • 8.1 金属结构的制作安装

    • 8.2 设备安装

    • 8.3 管道安装

    • 8.4 电气作业

    • 8.5 仪表作业

    • 8.6 涂装作业

    • 8.7 绝热作业

    • 8.8 筑炉、衬里作业

  • 9 特殊安装作业

    • 9.1 检修作业

    • 9.2 容器现场组焊

    • 9.3 切割、打磨与焊接作业

    • 9.4 热处理作业

    • 9.5 耐压试验

    • 9.6 清洗与吹扫作业

    • 9.7 气密性试验

  • 10 施工检测

    • 10.1 一般规定

    • 10.2 施工测量

    • 10.3 成分分析

    • 10.4 物理试验

    • 10.5 无损检测

  • 11 施工机械使用

    • 11.1 一般规定

    • 11.2 手持电动工具

    • 11.3 起重吊装机械

    • 11.4 预加工机械

    • 11.5 焊接机械

    • 11.6 动力机械

    • 11.7 土石方机械

    • 11.8 运输机械

    • 11.9 桩工及水工机械

    • 11.10 混凝土机械

    • 11.11 钢筋加工机械

    • 11.12 木工机械

    • 11.13 其他机械

  • 附录A 施工现场剩余电流保护器的接线方法

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 General requirements

    • 3.1 Site management

    • 3.2 Environmental protection

    • 3.3 Hot work

    • 3.4 Work in confined spaces

    • 3.5 Work at heights

    • 3.6 Seasonal construction

  • 4 Temporary construction electricity

    • 4.1 Management of electricity

    • 4.2 Power transformation and distribution and power self-supply

    • 4.3 Power distribution line

    • 4.4 Distribution box

    • 4.5 Earthing and neutral earthing

    • 4.6 Electricity for lighting

    • 4.7 Temporary facillity construction

  • 5 Lifting operations

    • 5.1 General requirements

    • 5.2 Lifting gear and rigging

    • 5.3 Operations with hoist

    • 5.4 Mobile crane

    • 5.5 Hoisting operations with tower crane

    • 5.6 Hoisting operations with overhead crane

    • 5.7 Hydraulic lifting systematic operation

    • 5.8 Handling and trasportation work

  • 6 Scaffolding work

    • 6.1 General requirements

    • 6.2 Scaffold materials

    • 6.3 Erection use and removal

    • 6.4 Handling and transportation work

  • 7 Civil work

    • 7.1 Earthwork

    • 7.2 Foundation excavation protection and drainage

    • 7.3 Piling work

    • 7.4 Dynamic compaction work

    • 7.5 Open caisson work

    • 7.6 Reinforcement work

    • 7.7 Formwork

    • 7.8 Concrete work

    • 7.9 Masonry work

    • 7.10 Water-proofing and anti-corrosion work

  • 8 Installation work

    • 8.1 Fabrication and installation of metal structures

    • 8.2 Equipment erection

    • 8.3 Pipe installation

    • 8.4 Electrical installation

    • 8.5 Instrumentation installation

    • 8.6 Painting work

    • 8.7 Insulation operations

    • 8.8 Furnace building and lining work

  • 9 Special erection

    • 9.1 Revamping operation

    • 9.2 Field vessel assembly and welding

    • 9.3 Cutting,grinding and welding work

    • 9.4 Heat treatment

    • 9.5 Pressure test

    • 9.6 Cleanning and blowing work

    • 9.7 Air-tightness test

  • 10 Construcion inspection

    • 10.1 General requirements

    • 10.2 Construction measurement

    • 10.3 Composition analysis

    • 10.4 Physical test

    • 10.5 Nondestructive test

  • 11 Construction machinery

    • 11.1 General requirements

    • 11.2 Electric handtools

    • 11.3 Lifting machinery

    • 11.4 Pre-process machinery

    • 11.5 Welding machinery

    • 11.6 Power machinery

    • 11.7 Earthwork machinery

    • 11.8 Transport machinery

    • 11.9 Piling and hydraulic machinery

    • 11.10 Concrete machinery

    • 11.11 Reinforcement processing machinery

    • 11.12 Woodworking machinery

    • 11.13 Other machinery

  • Appendix A Wiring method for residul current protector on site

  • Explanation of wording in this standard

  • List of quoted standards

中华人民共和国住房和城乡建设部公告

4-40-00
2019年 第194号
住房和城乡建设部关于发布国家标准《石油化工建设工程施工安全技术标准》的公告
现批准《石油化工建设工程施工安全技术标准》为国家标准,编号为GB/T 50484—2019,自2019年12月1日起实施。原国家标准《石油化工建设工程施工安全技术规范》GB 50484—2008同时废止。
本标准在住房和城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房和城乡建设部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2019年7月10日

本书术语

术语 英文名称
施工动火 hot work
固定动火区 specified hot work area
生命绳 life yarn
临时用电 electricity on construction site
配电柜 distributing tank
总配电箱 total distribution box
分配电箱 sub-distribution box
开关箱 switch box
配电箱 distribution box
剩余电流保护器 residual current device(RCD)

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称