点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50730-2011 冶金机械液压、润滑和气动设备工程施工规范 - 工标库

GB 50730-2011 冶金机械液压、润滑和气动设备工程施工规范 现行

发布日期:2011-07-29

实施日期:2012-08-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前  言

  • 1 总  则

  • 2 基本规定

  • 3 设备和材料进场

    • 3.1 设备进场

    • 3.2 材料进场

  • 4 设备安装

    • 4.1 一般规定

    • 4.2 设备基础

    • 4.3 设备安装基准线和基准点

    • 4.4 地脚螺栓

    • 4.5 垫  板

    • 4.6 油  箱

    • 4.7 冷却器、蒸汽加热器

    • 4.8 过 滤 器

    • 4.9 蓄 能 器

    • 4.10 泵及泵组

    • 4.11 成套液压(润滑)站

    • 4.12 阀架和阀

    • 4.13 净 油 机

    • 4.14 润滑脂泵站及给油器、分配器

    • 4.15 分水滤气器、油雾(油气)器及控制阀

  • 5 管道加工与安装

    • 5.1 一般规定

    • 5.2 管道加工

    • 5.3 管道焊接

    • 5.4 管道酸洗

    • 5.5 管道安装

  • 6 管道冲洗、吹扫和压力试验

    • 6.1 管道冲洗

    • 6.2 管道吹扫

    • 6.3 管道压力试验

  • 7 调试和试运转

    • 7.1 一般规定

    • 7.2 液压系统调试和试运转

    • 7.3 润滑油系统调试和试运转

    • 7.4 润滑脂系统调试和试运转

    • 7.5 油雾润滑系统调试和试运转

    • 7.6 工艺润滑系统调试和试运转

    • 7.7 气动系统调试和试运转

  • 8 管道涂漆

  • 9 安全和环保

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Basic requirement

  • 3 Equipment and material entering the site

    • 3.1 Equipment entering the site

    • 3.2 Material entering the site

  • 4 Installation of equipment

    • 4.1 General requirement

    • 4.2 Equipment foundation

    • 4.3 Datum line and datum mark for installation of equipment

    • 4.4 Foot bolt

    • 4.5 Pedestal

    • 4.6 Oil tank

    • 4.7 Cooler,steam heater

    • 4.8 Filter

    • 4.9 Energy accumulator

    • 4.10 Pump and pumps

    • 4.11 Complete set of hydraulic(lubricanting)station

    • 4.12 Valve rack and valve

    • 4.13 Oil-purefying machine

    • 4.14 Lubricant grease pump station and oil feeder,oil dispenser

    • 4.15 Water ditribution gas filter,oil atomization machine and control valve

  • 5 Processing and Installation of pipe

    • 5.1 General requirement

    • 5.2 Processing of pipe

    • 5.3 Welding of pipe

    • 5.4 Pickling of pipe

    • 5.5 Installation of pipe

  • 6 Flushing,purging of pipe and pressure test

    • 6.1 Flushing of pipe

    • 6.2 Purging of pipe

    • 6.3 Test of pipe pressure

  • 7 Commissioning and trial running

    • 7.1 General requirement

    • 7.2 Commissioning and trial running of hydraulic system

    • 7.3 Commissioning and trial running of lubricant oil

    • 7.4 Commissioning and trial running of lubricant grease

    • 7.5 Commissioning and trial running of oil atomization lubricant system

    • 7.6 Commissioning and trial running of process lubricant system

    • 7.7 Commissioning and trial running of pneumatic systems

  • 8 Painting of pipe

  • 9 Safety and environmental protection

  • Explanation of wording in this code

  • List of quoted standards

中华人民共和国住房和城乡建设部公告

4-4 0-0 0
第1113号
关于发布国家标准《冶金机械液压、润滑和气动设备工程施工规范》的公告
现批准《冶金机械液压、润滑和气动设备工程施工规范》为国家标准,编号为GB 50730—2011,自2012年8月1日起实施。其中,第2.0.45.3.12条为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
二〇一一年七月二十九日

本书术语

术语 英文名称

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称