点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 823-2021 排水球墨铸铁管道工程技术规程 - 工标库

T/CECS 823-2021 排水球墨铸铁管道工程技术规程 现行

发布日期:2021-02-26

实施日期:2021-07-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

  • 4 管  材

    • 4.1 规格与接口

    • 4.2 材料性能

    • 4.3 管的分级

    • 4.4 管的尺寸

    • 4.5 顶管管材

  • 5 管道设计

    • 5.1 一般规定

    • 5.2 水力计算

    • 5.3 管道布置

    • 5.4 检查井

    • 5.5 防腐蚀设计

  • 6 结构设计

    • 6.1 一般规定

    • 6.2 管道结构上的作用

    • 6.3 管道的强度计算

    • 6.4 管道的稳定验算

    • 6.5 管道的变形验算

    • 6.6 明装管道的结构设计

    • 6.7 构造措施

  • 7 施  工

    • 7.1 一般规定

    • 7.2 运输和储存

    • 7.3 安装

    • 7.4 沟槽回填

    • 7.5 顶管施工

    • 7.6 管道修补

    • 7.7 质量验收

  • 8 功能性试验

    • 8.1 一般规定

    • 8.2 无压管道闭水试验

    • 8.3 无压管道闭气试验

    • 8.4 压力管道水压试验

  • 9 工程竣工验收

  • 附录A 管的壁厚与压力

  • 附录B 球墨铸铁检查井

  • 附录C 管侧土的综合变形模量

  • 附录D 管道在各种荷载作用下的最大弯矩系数和竖向变形系数

  • 附录E 管的环刚度和最大允许变形率

  • 附录F 闭气法试验方法

  • 本规程用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

  • 4 Pipe

    • 4.1 General requirements

    • 4.2 Material

    • 4.3 Classification of pipes

    • 4.4 Pipe size

    • 4.5 Jacking pipe

  • 5 Piping design

    • 5.1 General requirements

    • 5.2 Hydraulic calculation

    • 5.3 Piping layout

    • 5.4 Manhole

    • 5.5 Anti-corrosion design

  • 6 Structural design

    • 6.1 General requirements

    • 6.2 Function of pipeline structure

    • 6.3 Strength calculation of pipeline

    • 6.4 Buching check of pipeline

    • 6.5 deformation check of pipeline

    • 6.6 Structural design of uncovered pipeline

    • 6.7 Structural regulation

  • 7 Construction

    • 7.1 General requirements

    • 7.2 Transportation and storage

    • 7.3 Pipe installation

    • 7.4 Trench backfill

    • 7.5 Pipe-jacking construction

    • 7.6 Pipe repair

    • 7.7 Quality acceptance

  • 8 Testing for functional

    • 8.1 General requirements

    • 8.2 Water obturation test for non-pressure pipeline

    • 8.3 Pneumatic pressure test for non-pressure pipeline

    • 8.4 Water pressure test for pressure pipeline

  • 9 Acceptance of project completion

  • Appendix A Wall thickness and pressure of pipe

  • Appendix B Ductile iron manhole

  • Appendix C Comprehensive deformation modulus of soil on pipe side

  • Appendix D Maximum bending moment coefficient and vertical deformation coefficient of pipeline under various loads

  • Appendix E Radial stiffness and maximum allowable deformation rate of pipe

  • Appendix F Test method of close air test

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第796号
关于发布《排水球墨铸铁管道工程技术规程》的公告
根据中国工程建设标准化协会和中国城镇供水排水协会团体标准制定计划,由上海市城市建设设计研究总院(集团)有限公司、北京市市政工程设计研究总院有限公司等单位编制的《排水球墨铸铁管道工程技术规程》,经中国工程建设标准化协会和中国城镇供水排水协会组织审查,现批准发布,编号为中国工程建设标准化协会T/CECS 823-2021,中国城镇供水排水协会T/CUWA 40071-2021,自2021年7月1日起施行。
中国工程建设标准化协会
中国城镇供水排水协会
二〇二一年二月二十六日

本书术语

术语 英文名称
排水球墨铸铁管 ductile iron pipe of wastewater
管件 ductile iron fitting
附件 ductile iron accessory
密封圈 gasket
明装管道 uncovered pipeline
压力分级管 pressure classification pipe
壁厚分级管 thickness classification pipe
滑入式柔性接口 push-in flexible joint
机械式柔性接口 mechanical flexible joint
自锚接口 restraint joint

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称