点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
NB/T 11514-2024 35kV及以下交流超导电力电缆线路设计规程 - 工标库

NB/T 11514-2024 35kV及以下交流超导电力电缆线路设计规程 现行

发布日期:2024-05-24

实施日期:2024-11-24

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 国家能源局公告 2024年 第2号

  • 前言

  • 1 总 则

  • 2 术 语

  • 3 基本规定

  • 4 电缆路径

  • 5 电缆敷设方式

    • 5.1 一般规定

    • 5.2 保护管敷设

    • 5.3 电缆沟敷设

    • 5.4 隧道敷设

  • 6 电缆选型

    • 6.1 结构型式

    • 6.2 导体选择

    • 6.3 绝缘与金属屏蔽层

    • 6.4 超导电缆恒温器

    • 6.5 外护套

  • 7 电缆附件及配套装置

    • 7.1 一般规定

    • 7.2 电缆终端和接头装置

    • 7.3 接地方式

  • 8 电缆的支持与固定

    • 8.1 一般规定

    • 8.2 电缆支持

    • 8.3 电缆固定

  • 9 电缆冷却系统

    • 9.1 一般规定

    • 9.2 冷却系统配置原则

    • 9.3 冷却系统的供电、供水

    • 9.4 冷却系统用房

  • 10 保护及监控

    • 10.1 继电保护及安全自动装置

    • 10.2 超导电缆监控系统

    • 10.3 通道在线监测

    • 10.4 信息通信与安全防护

  • 附录A 超导电缆接头工井长度计算

  • 附录B 超导电缆线路的设计分段长度计算

  • 本标准用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

  • 4 Cable route

  • 5 Cable laying

    • 5.1 General requirements

    • 5.2 Cable duct laying

    • 5.3 Cable trough laying

    • 5.4 Cable tunnel laying

  • 6 Selection of cable construction

    • 6.1 Cable geometry

    • 6.2 Cable conductors

    • 6.3 Insulation and metallic sheaths

    • 6.4 Cryostat

    • 6.5 Oversheaths

  • 7 Selection of cable accessories

    • 7.1 General requirements

    • 7.2 Cable terminations and joints

    • 7.3 Grounding methods

  • 8 Cable supports and fixings

    • 8.1 General requirements

    • 8.2 Cable supports

    • 8.3 Cable fixing

  • 9 Cable cooling system

    • 9.1 General requirements

    • 9.2 Cooling system configuration

    • 9.3 Power and water supply for cooling system

    • 9.4 Equipment room for coolying devices

  • 10 Protection and monitoring devices configuration

    • 10.1 Protection configuration and automatic safety devices

    • 10.2 Monitor systems for superconductor cables

    • 10.3 Online monitor for cable channals

    • 10.4 Information communication and safety

  • Appendix A Calculation method of superconductor cable joint manhole length

  • Appendix B Calculation method of design segment length of superconductor cable line

  • Explanation of wording in this code

  • List of quoted standards

国家能源局公告 2024年 第2号

4-40-01
根据《中华人民共和国标准化法》《能源标准化管理办法》,国家能源局批准《直接串入式线路静止同步补偿装置》等335项能源行业标准(附件1)、《Specification for Reservoir Area Engineering Geological Investigation of Hydropower Projects》等20项能源行业标准外文版(附件2)、《水工混凝土结构设计规范》等4项能源行业标准修改通知单(附件3),现予以发布。
附件:1.行业标准目录(节选)
2.行业标准外文版目录(略)
3.行业标准修改通知单(略)
国家能源局
2024年5月24日
附件1:
行业标准目录(节选)

本书术语

术语 英文名称
超导电缆 superconductor cable
超导电缆恒温器 superconductor cable cryostat
单芯超导电缆 single-core superconductor cable
三芯超导电缆 three-core superconductor cable
三相同轴超导电缆 three-phase concentric superconductor cable
超导电缆终端 superconductor cable termination
超导电缆接头 superconductor cable joint
限位固定 slip fixing
失超 quench

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称