点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1259-2023 囊式扩体锚杆技术规程 - 工标库

T/CECS 1259-2023 囊式扩体锚杆技术规程 现行

发布日期:2023-01-19

实施日期:2023-06-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 工程勘察

  • 4 材料

  • 5 锚杆设计

    • 5.1 一般规定

    • 5.2 锚杆抗拔承载力计算

    • 5.3 锚杆承载力验算

    • 5.4 锚杆预应力

    • 5.5 结构构造

    • 5.6 防腐

    • 5.7 锚固节点防水构造

  • 6 基坑及边坡锚固设计

    • 6.1 一般规定

    • 6.2 边坡锚固

    • 6.3 基坑支护结构锚固

  • 7 基础结构锚固设计

    • 7.1 一般规定

    • 7.2 高耸结构基础锚固

    • 7.3 拱脚基础锚固

  • 8 结构抗浮锚固设计

    • 8.1 一般规定

    • 8.2 抗浮计算

    • 8.3 锚杆与底板锚固节点设计

    • 8.4 张拉与锁定

  • 9 锚杆施工

    • 9.1 一般规定

    • 9.2 钻孔与扩孔

    • 9.3 杆体制作与安放

    • 9.4 制浆与注浆

    • 9.5 锚固节点防水与防腐

    • 9.6 张拉与锁定

    • 9.7 施工质量控制

    • 9.8 施工安全与环境保护

  • 10 锚杆试验

    • 10.1 一般规定

    • 10.2 基本试验

    • 10.3 验收试验

    • 10.4 试验与检测报告

  • 11 质量检验与验收

    • 11.1 质量检验

    • 11.2 验收

  • 附录A 锚杆筋体的几何参数与力学性能

  • 附录B 锚固板计算

  • 附录C 囊式扩体锚杆施工工艺流程

  • 附录D 锚杆试验

    • D.1 试验装置与操作要求

    • D.2 试验曲线

    • D.3 试验锚杆抗拔承载力确定方法

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Geotechnical investigation

  • 4 Materials

  • 5 Anchor design

    • 5.1 General requirements

    • 5.2 Calculation on load holding capacity of anchor

    • 5.3 Checking bearing capacity of anchor

    • 5.4 Prestress of anchor

    • 5.5 Structures

    • 5.6 Corrosion protection

    • 5.7 Joint waterproofing between slab and anchor

  • 6 Design of excavation and slope stability

    • 6.1 General requirements

    • 6.2 Design of anchored slope

    • 6.3 Design of anchored wall

  • 7 Design of anchored foundation

    • 7.1 General requirements

    • 7.2 Anchors for foundation of highrise structure

    • 7.3 Anchors for arch foot foundation

  • 8 Design of anti-floating structure

    • 8.1 General requirements

    • 8.2 Calculation of anti-floating structure

    • 8.3 Design of joint point between slab and anchor head

    • 8.4 Prestress and lockoff

  • 9 A nchor construction

    • 9.1 General requirements

    • 9.2 Drilling and reaming

    • 9.3 Fabrication and installation

    • 9.4 Mixing and injection

    • 9.5 Joint waterproofing and anticorrosion of anchor

    • 9.6 Prestress and lockoff

    • 9.7 Quality control

    • 9.8 Safety of construction and environment protection

  • 10 Anchor tests

    • 10.1 General requirements

    • 10.2 Investigation test

    • 10.3 Acceptance test

    • 10.4 Report of test and inspection

  • 11 Quality inspection and acceptance

    • 11.1 Quality inspection

    • 11.2 Acceptance

  • Appendix A Mechanical properties of tendons

  • Appendix B Calculation of anchored plate

  • Appendix C Construction process of under-reamed ground anchors

  • Appendix D Anchor tests

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告

5-50-00
第1446号
关于发布《囊式扩体锚杆技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2017年第二批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2017〕031号)的要求,由中冶建筑研究总院有限公司、建研地基基础工程有限责任公司等单位编制的《囊式扩体锚杆技术规程》,经本协会地基基础专业委员会组织审查,现批准发布,编号为T/CECS 1259-2023,自2023年6月1日起施行。
中国工程建设标准化协会
2023年1月19日

本书术语

术语 英文名称
囊式扩体锚杆 under-reamed ground anchor with capsule
压力型囊式扩体锚杆 compression type under-reamed ground anchor with capsule
可拆筋囊式扩体锚杆 removable under-reamed ground anchor with capsule
非扩体锚固段 fixed anchor length in slim-borehole
扩体锚固段 fixed anchor length in under-reamed hole
膨胀挤压筒 device of expandable capsule
扩体锚杆深径比 ratio of slim-borehole length to diameter of under-reamed body
外锚头 anchor head
内锚头 inner head at the end of anchor
囊袋注浆 capsule grouting

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称