点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50973-2014 联合循环机组燃气轮机施工及质量验收规范 - 工标库

GB 50973-2014 联合循环机组燃气轮机施工及质量验收规范 现行

发布日期:2014-01-29

实施日期:2014-10-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告 第314号

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

    • 3.1 一般规定

    • 3.2 设备器材

    • 3.3 与土建工程配合的要求

    • 3.4 设备及系统安装

  • 4 燃料供应系统

    • 4.1 一般规定

    • 4.2 设备安装

    • 4.3 管道安装

  • 5 燃气轮机本体

    • 5.1 基础准备

    • 5.2 台板与支承装置安装

    • 5.3 燃气轮机本体安装

    • 5.4 盘车装置安装

    • 5.5 自同步装置安装

    • 5.6 燃气轮机进气、排气设备安装

    • 5.7 燃气轮机罩壳的安装

    • 5.8 燃气轮机保温安装

  • 6 燃气轮机附属系统

    • 6.1 一般规定

    • 6.2 燃机附属机械、辅助设备

    • 6.3 燃机附属系统管道

  • 7 燃气轮机及附属系统调整、启动、试运行

    • 7.1 一般规定

    • 7.2 燃气轮机附属机械试运行

    • 7.3 燃油系统吹扫及油循环

    • 7.4 天然气管道吹扫及系统气体置换

    • 7.5 控制油、润滑油系统冲洗及试运行

    • 7.6 二氧化碳灭火系统调试

  • 8 工程质量验收

    • 8.1 工程质量验收划分

    • 8.2 工程质量验收

  • 附录A 附属机械联轴器找中心允许偏差值

  • 附录B 附属机械振动标准

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

    • 3.1 General requirements

    • 3.2 Equipments

    • 3.3 Requirements of civil engineering

    • 3.4 Installation of equirements and systems

  • 4 Fuel supply system

    • 4.1 General requirements

    • 4.2 Equipment installation

    • 4.3 Piping installation

  • 5 Gas turbine proper

    • 5.1 Foundation preparation

    • 5.2 Installation of pedestal and support device

    • 5.3 Installation of gas turbine proper

    • 5.4 Turning gear installation

    • 5.5 Synchronizer installation

    • 5.6 Installation of gas turbine air intake and exhaust system

    • 5.7 Installation of gas turbine enclosure

    • 5.8 Installation of gas turbine insulating

  • 6 Gas turbine accessory systems

    • 6.1 General requirements

    • 6.2 Subsidiary machinery,auxiliary equipments of gas turbine

    • 6.3 Piping of gas turbine subsidiary systems

  • 7 Regulation,start-up and trial run of gas turbine and subsystems

    • 7.1 General requirements

    • 7.2 Commissioning of gas turbine subsidiary machinery

    • 7.3 Purging and flushing of fuel oil system

    • 7.4 Flushing and gas displacement of gas piping

    • 7.5 Flushing and commissioning of lubrication system,control oil system

    • 7.6 Commissioning of CO2extingiushment system

  • 8 Acceptance of constructional quality

    • 8.1 Partition of constructional quality acceptance

    • 8.2 Acceptance of constructional quality

  • Appendix A Centre deviation of subsidiary machinery

  • Appendix B Code for vibration of subsidiary machinery

  • Explanation of wording in this code

  • List of quoted standards

中华人民共和国住房和城乡建设部公告 第314号

住房城乡建设部关于发布国家标准《联合循环机组燃气轮机施工及质量验收规范》的公告
00-04-4
现批准《联合循环机组燃气轮机施工及质量验收规范》为国家标准,编号为GB 50973—2014,自2014年10月1日起实施。其中,第3.4.53.4.104.3.5(1)、4.3.75.3.105.6.46.2.67.4.47.4.57.4.97.4.127.4.137.4.167.5.57.6.4条(款)为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2014年1月29日

本书术语

术语 英文名称
简单循环 simpl cycle
联合循环 combine cycle
检验批 inspectio lot
验收 acceptance
观感质量 qualit o appearance
检验 inspection
主控项目 dominan item
返工 rework
返修 repair
分部试运 commissionin o individua equipment an system

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称