点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1433-2023 挤扩支盘灌注桩检测标准 - 工标库

T/CECS 1433-2023 挤扩支盘灌注桩检测标准 现行

发布日期:2023-10-20

实施日期:2024-03-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 基本规定

  • 4 施工前机械设备和仪器检验

    • 4.1 一般规定

    • 4.2 挤扩设备检验

    • 4.3 支盘质监仪和网络云端自动监控平台检验

    • 4.4 电子盘径检测仪检验

  • 5 施工过程检测

    • 5.1 一般规定

    • 5.2 挤扩成腔过程检测

    • 5.3 成腔质量检测

  • 6 施工后基桩检测

    • 6.1 一般规定

    • 6.2 桩身完整性检测

    • 6.3 单桩承载力检测

  • 7 检测结果评价与报告

  • 附录A 检测工作流程图

  • 附录B 挤扩支盘设备构造和操作

  • 附录C 支盘质监仪构造及性能

  • 附录D 挤扩支盘成腔施工检测记录表

  • 附录E 网络云端自动监控平台

  • 附录F 电子盘径检测仪构造

  • 附录G 实时监控设备连接

  • 附录H 成腔质量检测记录

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Inspection of equipments and instruments before construction

    • 4.1 General requirements

    • 4.2 Inspection of squeezed equipment

    • 4.3 Inspection of branch disk quality monitor and network cloud automatic monitoring platform

    • 4.4 Inspection of electron aperture measuring instruments

  • 5 Construction process inspection

    • 5.1 General requirements

    • 5.2 Monitoring of cavity forming process by extrusion

    • 5.3 Inspection of the cavity quality

  • 6 Inspection after construction

    • 6.1 General requirements

    • 6.2 The pile integrity detection

    • 6.3 Bearing capacity test of single pile

  • 7 Results assessment and report

  • Appendix A Inspection workflow diagram

  • Appendix B Construction and operation requirements of expanded branches and plates

  • Appendix C Structure and performance requirements of branch and disk quality monitor

  • Appendix D Monitoring Record Form for cavity formation construction of expanded branches

  • Appendix E Network cloud automatic monitoring platform architecture

  • Appendix F Structure and connection requirements of electronic disc diameter tester

  • Appendix G Connection diagram of real-time monitoring equipment

  • Appendix H Format of hole forming quality inspection report

  • Explanation of wording

  • Explanation of wording

中国工程建设标准化协会公告

5-50-00
第1728号
关于发布《挤扩支盘灌注桩检测标准》的公告
根据中国工程建设标准化协会《关于印发〈2020年第二批协会标准制订、修订计划〉的通知》(建标协字〔2020〕23号)的要求,由北京交通大学、北京正源挤扩技术开发中心等单位编制的《挤扩支盘灌注桩检测标准》,经本协会地基基础专业委员会组织审查,现批准发布,编号为T/CECS 1433-2023,自2024年3月1日起施行。
中国工程建设标准化协会
2023年10月20日

本书术语

术语 英文名称
挤扩支盘灌注桩检测 testing of cast-in-situ pile with expanded branches and plates
挤扩支盘灌注桩施工过程检测 construction process testing for cast-in-situ pile with expanded branches and plates
分支腔 cavity of the cross branches
盘腔 cavity of the bearing plate
支盘腔 cavity of the cross branches and the bearing plate
首压值 first expanding and compaction pressure value
支盘位置 depth of branches plates
支盘直径 diameter of branches and plates
张开尺寸 stretch size
挤扩最大尺寸 maximum extension size

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称