点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50411-2019 建筑节能工程施工质量验收标准 - 工标库

GB 50411-2019 建筑节能工程施工质量验收标准 现行

发布日期:2019-05-24

实施日期:2019-12-01

替代以下标准: GB 50411-2007  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前 言

  • 1 总 则

  • 2 术 语

  • 3 基本规定

    • 3.1 技术与管理

    • 3.2 材料与设备

    • 3.3 施工与控制

    • 3.4 验收的划分

  • 4 墙体节能工程

    • 4.1 一般规定

    • 4.2 主控项目

    • 4.3 一般项目

  • 5 幕墙节能工程

    • 5.1 一般规定

    • 5.2 主控项目

    • 5.3 一般项目

  • 6 门窗节能工程

    • 6.1 一般规定

    • 6.2 主控项目

    • 6.3 一般项目

  • 7 屋面节能工程

    • 7.1 一般规定

    • 7.2 主控项目

    • 7.3 一般项目

  • 8 地面节能工程

    • 8.1 一般规定

    • 8.2 主控项目

    • 8.3 一般项目

  • 9 供暖节能工程

    • 9.1 一般规定

    • 9.2 主控项目

    • 9.3 一般项目

  • 10 通风与空调节能工程

    • 10.1 一般规定

    • 10.2 主控项目

    • 10.3 一般项目

  • 11 空调与供暖系统冷热源及管网节能工程

    • 11.1 一般规定

    • 11.2 主控项目

    • 11.3 一般项目

  • 12 配电与照明节能工程

    • 12.1 一般规定

    • 12.2 主控项目

    • 12.3 一般项目

  • 13 监测与控制节能工程

    • 13.1 一般规定

    • 13.2 主控项目

    • 13.3 一般项目

  • 14 地源热泵换热系统节能工程

    • 14.1 一般规定

    • 14.2 主控项目

    • 14.3 一般项目

  • 15 太阳能光热系统节能工程

    • 15.1 一般规定

    • 15.2 主控项目

    • 15.3 一般项目

  • 16 太阳能光伏节能工程

    • 16.1 一般规定

    • 16.2 主控项目

    • 16.3 一般项目

  • 17 建筑节能工程现场检验

    • 17.1 围护结构现场实体检验

    • 17.2 设备系统节能性能检验

  • 18 建筑节能分部工程质量验收

  • 附录A 建筑节能工程进场材料和设备复验项目

  • 附录B 保温板材与基层的拉伸粘结强度现场拉拔检验方法

    • B.1 一般规定

    • B.2 仪器设备

    • B.3 检验步骤与结果

  • 附录C 保温板粘结面积比剥离检验方法

  • 附录D 保温浆料干密度、导热系数、抗压强度检验方法

    • D.1 试件制作

    • D.2 试验方法及结果

  • 附录E 中空玻璃密封性能检验方法

  • 附录F 外墙节能构造钻芯检验方法

  • 附录G 正常检验抽样判定

  • 附录H 建筑节能分部、分项工程和检验批的质量验收表

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms

  • 3 Basic Requirements

    • 3.1 Technology and Management

    • 3.2 Materials and Equipment

    • 3.3 Construction and Control

    • 3.4 Division of Acceptance

  • 4 Wall Energy Efficient Project

    • 4.1 General Requirements

    • 4.2 Main Control Items

    • 4.3 General Items

  • 5 Curtain Walls Energy Efficient Project

    • 5.1 General Requirements

    • 5.2 Main Control Items

    • 5.3 General Items

  • 6 Doors and Windows Energy Efficient Project

    • 6.1 General Requirements

    • 6.2 Main Control Items

    • 6.3 General Items

  • 7 Roofs Energy Efficient Project

    • 7.1 General Requirements

    • 7.2 Main Control Items

    • 7.3 General Items

  • 8 Ground Energy Efficient Project

    • 8.1 General Requirements

    • 8.2 Control Items

    • 8.3 General Items

  • 9 Heating Energy Efficient Project

    • 9.1 General Requirements

    • 9.2 Main Control Items

    • 9.3 General Items

  • 10 Ventilation and Air-conditioning Energy Efficient Project

    • 10.1 General Requirements

    • 10.2 Main Control Items

    • 10.3 General Items

  • 11 Heat and Cold Source for HVAC and Pipe Network Energy Efficient Project

    • 11.1 General Requirements

    • 11.2 Main Control Items

    • 11.3 General Items

  • 12 Power Distribution and Lighting Energy Efficient Project

    • 12.1 General Requirements

    • 12.2 Main Control Items

    • 12.3 General Items

  • 13 Monitoring and Control Energy Efficient Project

    • 13.1 General Requirements

    • 13.2 Control Items

    • 13.3 General Items

  • 14 Ground Source Heat Pump Heat Exchanger System Energy Efficient Project

    • 14.1 General Requirements

    • 14.2 Main Control Items

    • 14.3 General Items

  • 15 Solar Optic-Thermal System Energy Efficient Project

    • 15.1 General Requirements

    • 15.2 Main Control Items

    • 15.3 General Items

  • 16 Solar Photovoltaic System Energy Efficient Project

    • 16.1 General Requirements

    • 16.2 Main Control Items

    • 16.3 General Items

  • 17 In-site Inspection of Energy Efficient Project

    • 17.1 In-site Inspection of Building Envelope

    • 17.2 Energy Efficient Performance Inspection of Equipment System

  • 18 Acceptance for Branches of Energy Efficient Project

  • Appendix A Site Reinspection Method of Materials and Equipment in Energy Efficient Project

  • Appendix B In-site Pull-out Test Method for Tensile Bond Strength between Insulation Board and Base Layer

  • Appendix C Peeling Test Method for Insulation Board Paste Area Ratio

  • Appendix D Test Method for Dry Density,Thermal Conductivity and Compressive Strength of Insulation Slurry in the Same Curing Condition

  • Appendix E Test Method of Insulating Hollow Glass Sealing Performance

  • Appendix F Test Method of Drilled Core on External Walls Structure

  • Appendix G Normal Inspection Sampling Determination

  • Appendix H Quality Acceptance List for Branch and Subdivisional Project and Inspection Lot of Energy Efficient Project

  • Explanation of Wording in This Standard

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

4-40-00
2019年 第136号
住房和城乡建设部关于发布国家标准《建筑节能工程施工质量验收标准》的公告
现批准《建筑节能工程施工质量验收标准》为国家标准,编号为GB 50411-2019,自2019年12月1日起实施。其中,第3.1.24.2.24.2.34.2.75.2.26.2.27.2.28.2.29.2.29.2.310.2.211.2.212.2.212.2.315.2.215.2.618.0.5条为强制性条文,必须严格执行。原《建筑节能工程施工质量验收规范》(GB 50411-2007)同时废止。
本标准在住房和城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房和城乡建设部标准定额研究所组织中国建筑工业出版社出版发行。
中华人民共和国住房和城乡建设部
2019年5月24日

本书术语

术语 英文名称
保温浆料 insulation mortar
玻璃遮阳系数 shading coefficient
透光幕墙 transparent curtain wall
灯具效率 luminaire efficiency
照明功率密度(LPD) lighting power density
进场验收 site acceptance
检验 inspection
复验 site reinspection (repeat test)
见证取样检验 witness sampling inspection
现场实体检验 in-site inspection

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称