点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 683-2020 装配式混凝土结构套筒灌浆质量检测技术规程 - 工标库

T/CECS 683-2020 装配式混凝土结构套筒灌浆质量检测技术规程 现行

发布日期:2020-04-16

实施日期:2020-10-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 检  测

    • 3.1 检测分类与检测方法

    • 3.2 检测程序与要求

    • 3.3 检测方式、检测数量与检测位置

    • 3.4 检测报告

  • 4 预埋传感器法

    • 4.1 一般规定

    • 4.2 检测设备

    • 4.3 检测流程与方法

    • 4.4 判定准则

  • 5 预埋钢丝拉拔法

    • 5.1 一般规定

    • 5.2 检测设备

    • 5.3 检测流程与方法

    • 5.4 判定准则

  • 6 钻孔内窥镜法

    • 6.1 一般规定

    • 6.2 检测设备

    • 6.3 检测流程与方法

    • 6.4 判定准则

  • 7 X射线数字成像法

    • 7.1 一般规定

    • 7.2 检测设备

    • 7.3 检测流程与方法

    • 7.4 判定准则

  • 附录A 预埋传感器法原始记录表

  • 附录B 预埋钢丝拉拔法原始记录表

  • 附录C 钻孔内窥镜法原始记录表

  • 附录D X射线数字成像法原始记录表

  • 本规程用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Inspection

    • 3.1 Classification and methods of inspection

    • 3.2 Program and requirement of inspection

    • 3.3 Methods,quantity and location of inspection

    • 3.4 Report of inspection

  • 4 Embedded sensor method

    • 4.1 General requirements

    • 4.2 Inspection apparatus

    • 4.3 Process and methods of inspection

    • 4.4 Decision criterion

  • 5 Embedded steel wire drawing method

    • 5.1 General requirements

    • 5.2 Inspection apparatus

    • 5.3 Process and methods of inspection

    • 5.4 Decision criterion

  • 6 Drilled hole endoscope method

    • 6.1 General requirements

    • 6.2 Inspection apparatus

    • 6.3 Process and methods of inspection

    • 6.4 Decision criterion

  • 7 X-ray digital radiography method

    • 7.1 General requirements

    • 7.2 Inspection apparatus

    • 7.3 Process and methods of inspection

    • 7.4 Decision criterion

  • Appendix A Original record table for embedded sensor method

  • Appendix B Original record table for embedded steel wire drawing method

  • Appendix C Original record table for drilled hole endoscope method

  • Appendix D Original record table for X-ray digital radiography method

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第580号
关于发布《装配式混凝土结构套筒灌浆质量检测技术规程》的公告
根据中国工程建设标准化协会《关于印发〈2017年第二批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2017〕031号)的要求,由上海市建筑科学研究院(集团)有限公司等单位编制的《装配式混凝土结构套筒灌浆质量检测技术规程》,经本协会混凝土结构专业委员会组织审查,现批准发布,编号为T/CECS 683-2020,自2020年10月1日起施行。
中国工程建设标准化协会
2020年4月16日

本书术语

术语 英文名称
灌浆饱满性 grouting plumpness
灌浆密实性 grouting compactness
预埋传感器法 embedded sensor method
预埋钢丝拉拔法 embedded steel wire drawing method
钻孔内窥镜法 drilled hole endoscope method
X射线数字成像法 X-ray digital radiography method
归一化灰度值 normalized grayscale value
注射补灌 injecting for supplementary grouting

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称