点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50819-2013 油气田集输管道施工规范 - 工标库

GB 50819-2013 油气田集输管道施工规范 现行

发布日期:2012-12-25

实施日期:2013-05-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

  • 4 材料验收及保管

    • 4.1 一般规定

    • 4.2 管子验收

    • 4.3 管道附件验收

    • 4.4 阀门验收

    • 4.5 焊接材料验收

    • 4.6 防腐、保温材料验收

    • 4.7 保  管

  • 5 交接桩与放线

    • 5.1 交 接 桩

    • 5.2 放  线

  • 6 施工便道修筑与作业带清理

    • 6.1 施工便道修筑

    • 6.2 作业带清理

  • 7 防腐管运输及布管

    • 7.1 运  输

    • 7.2 布  管

  • 8 管道组对、安装

    • 8.1一般规定

    • 8.2 钢管切割及坡口加工

    • 8.3 管道组对及安装

    • 8.4 补偿器安装

    • 8.5 支吊架安装

  • 9 钢管焊接及焊缝质量检验

    • 9.1 一般规定

    • 9.2 焊  接

    • 9.3 焊前预热及焊后热处理

    • 9.4 焊缝返修

    • 9.5 质量检验

  • 10 管道防腐保温及补口补伤

    • 10.1 一般规定

    • 10.2 管道防腐补口及补伤

    • 10.3 管道保温层补口及补伤

  • 11 管沟开挖

    • 11.1 一般规定

    • 11.2 管  沟

    • 11.3 开  挖

    • 11.4 验  收

  • 12 管道下沟及管沟回填

    • 12.1 一般规定

    • 12.2 管道下沟

    • 12.3 管沟回填

  • 13 清管、测径及试压

    • 13.1 一般规定

    • 13.2 清管及测径

    • 13.3 管道的强度及严密性试验

  • 14 管道干燥

  • 15 管道附属工程

    • 15.1 线路阀室

    • 15.2 阴极保护

    • 15.3 里程桩、转角桩、测试桩埋设

    • 15.4 锚 固 墩

    • 15.5 穿越地下管、线缆

    • 15.6 水工保护与水土保持

  • 16 交工验收

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms

  • 3 Basic Requirement

  • 4 Acceptance and Storage of Materials

    • 4.1 General Requirement

    • 4.2 Acceptance of Pipes

    • 4.3 Acceptance of Pipe Accessories

    • 4.4 Acceptance of Valves

    • 4.5 Acceptance of Welding Materials

    • 4.6 Acceptance of Anti-corrosiveand Thermal Insulation Materials

    • 4.7 Storage

  • 5 Delivery-receiving Stakeand Surveyand Setting-Out

    • 5.1 Delivery-receiving Stake

    • 5.2 Survey and Setting-out

  • 6 Cleaning of Operation Zoneand Construction of Access Road

    • 6.1 Construction of Access Road

    • 6.2 Cleaning of Operation Zone

  • 7 Transportation and Anti-corrosive Pipe Laying

    • 7.1 Transportation

    • 7.2 Pipe Laying

  • 8 Pipe Pairing and Installation

    • 8.1 General Requirement

    • 8.2 Beveling or Cutting of Steel Pipes

    • 8.3 Pipe Pairing and Installation

    • 8.4 Installation of Compensators

    • 8.5 Installation of supports and hangers

  • 9 Steelpipe Welding Quality Inspection

    • 9.1 General Requirement

    • 9.2 Welding

    • 9.3 Welding Preheating and Postweld Heat Treatment

    • 9.4 Weld Repair

    • 9.5 Quality Inspection

  • 10 Repair of Anti-corrosion and Thermal Insulation of Pipe

    • 10.1 General Requirement

    • 10.2 Repair of Anti-corrosion of Pipe

    • 10.3 Repair of Thermal Insulation of Pipe

  • 11 Pipe Trench Excavation

    • 11.1 General Requirement

    • 11.2 Pipe Trench

    • 11.3 Pipe Trench Excavation

    • 11.4 Pipe Trench Acceptance

  • 12 Pipe Lowering-in and Trench Backfilling

    • 12.1 General Requirement

    • 12.2 Pipe Lowing-in

    • 12.3 Trench Backfilling

  • 13 Pigging,Diameter Measurement and Pressure Test

    • 13.1 General Requirement

    • 13.2 Pigging and Diameter Measurement

    • 13.3 Pipe Strength and Leak Test

  • 14 Pipeline Drying

  • 15 Pipeline Ancillary Works

    • 15.1 Line Valve Box

    • 15.2 CathodicProtection

    • 15.3 Embedment of Mileage Stake,Corner Pileand Test Stake

    • 15.4 Anchoring Pier

    • 15.5 Acrossing of Pipes and Cables Underground

    • 15.6 Hydraulic Protection and Soiland Water Conservation

  • 16 Delivery and Acceptance

  • Explanation of Wordingin This Code

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

4-4 0-0 0
第1601号
住房城乡建设部关于发布国家标准《油气田集输管道施工规范》的公告
现批准《油气田集输管道施工规范》为国家标准,编号为GB 50819—2013,自2013年5月1日起实施。其中,第4.4.38.1.1条为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2012年12月25日

本书术语

术语 英文名称
油气田集输 oil-gas field gathering and transportation
采油管道 oil flow pipeline
集油管道 crude gathering pipeline
采气管道 gas flow pipeline
集气管道 gas gathering pipeline
接转站 pumping stations
公称压力(PN) nominal pressure

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称