点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 1651-2024 建设工程承插型盘扣式钢管脚手架施工标准 - 工标库

T/CECS 1651-2024 建设工程承插型盘扣式钢管脚手架施工标准 现行

发布日期:2024-07-22

实施日期:2024-12-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告 第2060号

  • 前言

  • 1 总则

  • 2 术语和符号

    • 2.1 术语

    • 2.2 符号

  • 3 基本规定

  • 4 施工准备

    • 4.1 一般规定

    • 4.2 技术准备

    • 4.3 材料机具

    • 4.4 施工人员

    • 4.5 计算机软件

  • 5 设计计算

    • 5.1 一般规定

    • 5.2 荷载

    • 5.3 地基承载力计算

    • 5.4 楼面承载力计算

    • 5.5 梁模板支撑架计算

    • 5.6 板模板支撑架计算

    • 5.7 箱梁模板支撑架计算

    • 5.8 施工升降机基础支撑架计算

    • 5.9 地下室顶板支撑架计算

    • 5.10 落地作业架计算

    • 5.11 悬挑作业架计算

    • 5.12 操作平台作业架计算

    • 5.13 构配件计算

  • 6 地基与基础

  • 7 施工架体排布

    • 7.1 一般规定

    • 7.2 地下室顶板支撑架

    • 7.3 梁模板支撑架

    • 7.4 不符合模数梁板模板支撑架

    • 7.5 非正交梁模板支撑架

    • 7.6 边梁模板支撑架

    • 7.7 高低差梁板模板支撑架

    • 7.8 伸缩缝处双梁模板支撑架

    • 7.9 圆弧梁模板支撑架

    • 7.10 楼梯间模板支撑架

    • 7.11 斜屋面模板支撑架

    • 7.12 汽车坡道模板支撑架

    • 7.13 箱梁模板支撑架

    • 7.14 施工升降机基础支撑架

    • 7.15 后浇带处脚手架

    • 7.16 落地作业架

    • 7.17 悬挑作业架

    • 7.18 异型建筑作业架

    • 7.19 圆弧形作业架

  • 8 构造措施

    • 8.1 一般规定

    • 8.2 支撑架

    • 8.3 作业架

    • 8.4 悬挑作业架

    • 8.5 人行通道

  • 9 安装与拆除

    • 9.1 一般规定

    • 9.2 专项施工方案编制

    • 9.3 方案审核与审批

    • 9.4 地基与基础

    • 9.5 支撑架安装与拆除

    • 9.6 作业架安装与拆除

  • 10 检查验收

  • 11 安全管理

  • 12 使用维护

  • 13 混凝土浇筑

  • 14 智能监测

  • 15 信息归集

  • 附录A 支撑架设计计算时需要录入的数据

  • 附录B 作业架设计计算时需要录入的数据

  • 用词说明

  • 引用标准名录

  • 制定说明

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Construction preparation

    • 4.1 General requirements

    • 4.2 Technical preparation

    • 4.3 Material implements

    • 4.4 Construction personnel

    • 4.5 Calculation software

  • 5 Design calculations

    • 5.1 General requirements

    • 5.2 Loads

    • 5.3 Calculation of bearing capacity of foundation

    • 5.4 Calculation of floor bearing capacity

    • 5.5 Beam formwork support frame calculation

    • 5.6 Plate formwork support frame calculation

    • 5.7 Box girder formwork support frame calculation

    • 5.8 Construction lift foundation support frame calculation

    • 5.9 Basement roof support frame calculation

    • 5.10 Floor frame calculation

    • 5.11 Cantilevered work frame calculation

    • 5.12 Calculation of operating platform work frame

    • 5.13 Component calculation

  • 6 Subgrade and foundation

  • 7 Layout of construction frames

    • 7.1 General requirements

    • 7.2 Basement roof support frame

    • 7.3 Beam formwork support frame

    • 7.4 Does not conform to modular beam plate formwork support frame

    • 7.5 Non-orthogonal beam formwork support frame

    • 7.6 Side beam formwork support frame

    • 7.7 Height difference beam plate formwork support frame

    • 7.8 Double beam formwork support frame at expansion joint

    • 7.9 ARC beam formwork support frame

    • 7.10 Stairway formwork support frame

    • 7.11 Inclined roof formwork support frame

    • 7.12 Auto ramp formwork support frame

    • 7.13 Box girder formwork support frame

    • 7.14 Construction hoist foundation support frame

    • 7.15 Scaffolding at the post-casting tape

    • 7.16 Floor work scaffolding

    • 7.17 Cantilevered work scaffolding

    • 7.18 Special-shaped construction work frame

    • 7.19 ARC working frame

  • 8 Construction measures

    • 8.1 General requirements

    • 8.2 Support scaffolding

    • 8.3 Job scaffolding

    • 8.4 Cantilevered work frame

    • 8.5 Human scale

  • 9 Installation and removal

    • 9.1 General requirements

    • 9.2 Preparation of special construction plans

    • 9.3 Programme review and approval

    • 9.4 Subgrade and foundations

    • 9.5 Support scaffolding installation and removal

    • 9.6 Work scaffolding installation and removal

  • 10 Check acceptance

  • 11 Security management

  • 12 Use maintenance

  • 13 Concrete pouring

  • 14 Intelligent monitoring

  • 15 Aggregation of information

  • Appendix A The data needed to be entered in the design calculation of the support frame

  • Appendix B The data needed to be entered in the design calculation of the work frame

  • Explanation of wording

  • List of quoted standards

中国工程建设标准化协会公告 第2060号

4-40-00
关于发布《建设工程承插型盘扣式钢管脚手架施工标准》的公告
根据中国工程建设标准化协会《关于印发〈2021年第二批协会标准制订、修订计划〉的通知》(建标协字〔2021〕20号)的要求,由昊基工程建设(江苏)有限公司、江苏建研设计研究有限公司等单位编制的《建设工程承插型盘扣式钢管脚手架施工标准》,经协会建筑施工专业委员会组织审查,现批准发布,编号为T/CECS 1651—2024,自2024年12月1日起施行。
中国工程建设标准化协会
二〇二四年七月二十二日

本书术语

术语 英文名称
承插型盘扣式钢管脚手架 disk lock steel tubular scaffold
支撑脚手架 shoring scaffold
作业脚手架 operation scaffold
立杆 standard
可调水平杆 adjustable levelling rod
可调斜杆 adjustable tilt rod
可调托撑 head jack
扣件钢管连接加固 fastener steel pipe connection reinforcement
脚手架设计 design of scaffolding
施工架体排布 layout of construction frames

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称