点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
T/CECS 225-2020 建筑物移位纠倾增层与改造技术标准 - 工标库

T/CECS 225-2020 建筑物移位纠倾增层与改造技术标准 现行

发布日期:2020-12-10

实施日期:2021-05-01

替代以下标准: CECS 225-2020   CECS 225:2007  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术语和符号

    • 2.1 术  语

    • 2.2 符  号

  • 3 基本规定

  • 4 检测与鉴定

    • 4.1 一般规定

    • 4.2 检  测

    • 4.3 鉴  定

  • 5 移位工程

    • 5.1 一般规定

    • 5.2 移位工程设计

    • 5.3 移位工程施工

    • 5.4 质量控制

  • 6 纠倾工程

    • 6.1 一般规定

    • 6.2 纠倾工程设计

    • 6.3 纠倾工程施工

    • 6.4 古建筑物纠倾加固

    • 6.5 防复倾加固

    • 6.6 质量控制

  • 7 增层工程

    • 7.1 一般规定

    • 7.2 直接增层

    • 7.3 外套增层

    • 7.4 室内增层

    • 7.5 地下增层

    • 7.6 地基基础

    • 7.7 质量控制

  • 8 结构改造加固

    • 8.1 一般规定

    • 8.2 结构改造设计

    • 8.3 结构加固方法

  • 9 地基基础加固

    • 9.1 一般规定

    • 9.2 基础加固

    • 9.3 基础托换

    • 9.4 地基加固

  • 10 质量检测与验收

    • 10.1 一般规定

    • 10.2 质量检测

    • 10.3 施工质量验收

  • 附录A 建筑物移位工程分项分类

  • 附录B 建筑物常用纠倾方法分类

  • 附录C 建筑物常用纠倾方法选择

  • 附录D 外套结构加固法

    • D.1 一般规定

    • D.2 抗震加固设计

    • D.3 加固施工和验收

  • 附录E 建筑物加固方法及裂缝修补

  • 附录F 既有建筑基础下地基土载荷试验要点

  • 附录G 地基基础加固方法选择与应用

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic requirements

  • 4 Detection and identification

    • 4.1 General requirements

    • 4.2 Detection

    • 4.3 Identification

  • 5 Moving engineering

    • 5.1 General requirements

    • 5.2 Moving engineering design

    • 5.3 Moving engineering construction

    • 5.4 Quality control

  • 6 Inclination rectification engineering

    • 6.1 General requirements

    • 6.2 Inclination rectification engineering design

    • 6.3 Inclination rectification engineering construction

    • 6.4 Rectification and reinforcement of ancient buildings

    • 6.5 Prevention of overturning and reinforcement

    • 6.6 Quality control

  • 7 Storey-adding engineering

    • 7.1 General requirements

    • 7.2 Direct storey adding

    • 7.3 Outer frame storey adding

    • 7.4 Indoor storey adding

    • 7.5 Underground storey adding

    • 7.6 Foundation

    • 7.7 Quality control

  • 8 Structural reinforcement and reconstruction

    • 8.1 General requirements

    • 8.2 Structural modification design

    • 8.3 Structural modification method

  • 9 Foundation reinforcement

    • 9.1 General requirements

    • 9.2 Foundation reinforcement

    • 9.3 Foundation replacement…

    • 9.4 Ground improvement

  • 10 Quality inspection and acceptance

    • 10.1 General requirements

    • 10.2 Quality inspection

    • 10.3 Quality acceptance

  • Appendix A Classification of building displacementengineering

  • Appendix B Classification of commonly used tiltcorrection methods for buildings

  • Appendix C Selection of common rectificationmethods for buildings

  • Appendix D Reinforcement of outer frame structurereinforcement

  • Appendix E Crack mending methods

  • Appendix F Key points of foundation soil load testfor existing building foundation

  • Appendix G Selection and application of foundationreinforcement method

  • Explanation of wording in this specification

  • List of quoted standards

中国工程建设标准化协会公告

4-40-00
第734号
关于发布《建筑物移位纠倾增层与改造技术标准》的公告
根据中国工程建设标准化协会《关于印发〈2017年第一批工程建设协会标准制订、修订计划〉的通知》(建标协字〔2017〕014号)的要求,由北京交通大学等单位编制的《建筑物移位纠倾增层与改造技术标准》,经协会地基基础专业委员会组织审查,现批准发布,编号为T/CECS 225-2020,自2021年5月1日起施行。原《建筑物移位纠倾增层与改造技术规范》CECS 225:2007同时废止。
中国工程建设标准化协会
二〇二〇年十二月十日

本书术语

术语 英文名称
移位工程 moving engineering
纠倾工程 incline-rectifying engineering
直接增层 direct storey-increasing
外套增层 storey-increasing of outer structure
室内增层 indoor storey-increasing
外套结构加固法 seismic strengthening of masonry structure using outer concrete structure
托盘结构 pallet structure
底盘结构 chassis structure
回倾速率 incline reverting speed

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称