点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB 50661-2011 钢结构焊接规范 - 工标库

GB 50661-2011 钢结构焊接规范 现行

发布日期:2011-12-05

实施日期:2012-08-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前 言

  • 1 总  则

  • 2 术语和符号

    • 2.1 术  语

    • 2.2 符  号

  • 3 基本规定

  • 4 材  料

  • 5 焊接连接构造设计

    • 5.1 一般规定

    • 5.2 焊缝坡口形式和尺寸

    • 5.3 焊缝计算厚度

    • 5.4 组焊构件焊接节点

    • 5.5 防止板材产生层状撕裂的节点、选材和工艺措施

    • 5.6 构件制作与工地安装焊接构造设计

    • 5.7 承受动载与抗震的焊接构造设计

  • 6 焊接工艺评定

    • 6.1 一般规定

    • 6.2 焊接工艺评定替代规则

    • 6.3 重新进行工艺评定的规定

    • 6.4 试件和检验试样的制备

    • 6.5 试件和试样的试验与检验

    • 6.6 免予焊接工艺评定

  • 7 焊接工艺

    • 7.1 母材准备

    • 7.2 焊接材料要求

    • 7.3 焊接接头的装配要求

    • 7.4 定 位 焊

    • 7.5 焊接环境

    • 7.6 预热和道间温度控制

    • 7.7 焊后消氢热处理

    • 7.8 焊后消应力处理

    • 7.9 引弧板、引出板和衬垫

    • 7.10 焊接工艺技术要求

    • 7.11 焊接变形的控制

    • 7.12 返 修 焊

    • 7.13 焊件矫正

    • 7.14 焊缝清根

    • 7.15 临时焊缝

    • 7.16 引弧和熄弧

    • 7.17 电渣焊和气电立焊

  • 8 焊接检验

    • 8.1 一般规定

    • 8.2 承受静荷载结构焊接质量的检验

    • 8.3 需疲劳验算结构的焊缝质量检验

  • 9 焊接补强与加固

  • 附录A 钢结构焊接接头坡口形式、尺寸和标记方法

  • 附录B 钢结构焊接工艺评定报告格式

  • 附录C 箱形柱(梁)内隔板电渣焊缝焊透宽度的测量

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms and Symbols

  • 3 Basic Requirement

  • 4 Materials

  • 5 Design of Welding Connections

    • 5.1 General Requirement

    • 5.2 Size and Form of Weld Groove

    • 5.3 Theoretical Throat of Weld

    • 5.4 Welding Nodal Point of Combined Welding Member

    • 5.5 Technics for Avoid of Lamellar Tearing

    • 5.6 Design of Shop and Field Welding Connections

    • 5.7 Design of Welding Connections Bearing Dynamic Load and Anti-earthquake

  • 6 Welding Procedure Qualifaction

    • 6.1 General Requirement

    • 6.2 Substitute Principles of Welding Procedure Qualifaction

    • 6.3 Requalifacition

    • 6.4 Prepartion of Test Pieces and Samples

    • 6.5 Testing

    • 6.6 Principle of Prequalifacition

  • 7 Welding Procedures

    • 7.1 Prepartion of Base Metal

    • 7.2 Requirement of Welding Consumables

    • 7.3 Assemble Requirement of Welding Joint

    • 7.4 Tack Weld

    • 7.5 Welding Environment

    • 7.6 Preheat and Ingterpass Temperature

    • 7.7 Hydrogen Relief Heat Treatment

    • 7.8 Stress Relief Treatment

    • 7.9 Weld Tabs and Backing

    • 7.10 Technic Requirement of Welding Procedure

    • 7.11 Contral of Welding Deformation

    • 7.12 Repairs

    • 7.13 Correction

    • 7.14 Backgouging

    • 7.15 Temporary Welds

    • 7.16 Striking and Extinguish of Arc

    • 7.17 ESW and EGW

  • 8 Inspection

    • 8.1 General Requirement

    • 8.2 Weld Inspection of Structure Bearing Static Load

    • 8.3 Weld Inspection of Structure Bearing Dynamic Load

  • 9 Strengthening and Repairing of Existing Structures

  • Appendix A Form,Size and Symbol of Weld Groove

  • Appendix B Format of WPQR

  • Appendix C Testing of ESW Weld of Box Members

  • Explanation of Wording in This Code

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

5-5 0-0 0
第1212号
关于发布国家标准《钢结构焊接规范》的公告
现批准《钢结构焊接规范》为国家标准,编号为GB 50661-2011,自2012年8月1日起实施。其中,第4.0.15.7.16.1.18.1.8条为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国建筑工业出版社出版发行。
中华人民共和国住房和城乡建设部
2011年12月5日

本书术语

术语 英文名称
消氢热处理 hydrogen relief heat treatment
消应热处理 stress relief heat treatment
过焊孔 weld access hole
免予焊接工艺评定 prequalification of WPS
焊接环境温度 temperature of welding circumstance
药芯焊丝自保护焊 flux cored wire selfshield arc welding
检测 testing
检查 inspection

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5 ICP 许可证编号 : 京B2-20262562
新建收藏夹

选择收藏夹

收藏夹名称