首页 >标准规范

球墨铸铁排水管道工程技术规程

Technical Specifications for Ductile Iron Pipeline of Drainage Engineering

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【批准部门】

    广东省住房和城乡建设厅

  • 【发布单位】

    广东省住房和城乡建设厅

  • 【主编单位】

    广东省建筑设计研究院有限公司

  • 【参编单位】

    新兴铸管股份有限公司;广州市城市排水有限公司;广州水务协会;中铁一局集团有限公司;广州市公用事业规划设计有限责任公司;中誉设计有限公司

  • 【主要起草人】

    李骏飞;杨磊三;李华成;李德强;卢宝光;周炜峙;孙安;陈位洪;袁秀丽;袁嵘;焦瑞虎;王彩虹;韩远忠;郭嘉湄;刘林科;赵志诚;祝雄涛;赵健;任宪超;黄猛;初振宇;赖竺;孟凡松;杨静琨;黄红;区永杰;陈浩亮;陈覃;何其活;林英

  • 【主要审查人】

    赫俊国;安关峰;周建华;袁维芳;郭兵;劳伟康;梅胜

收起

中文目录

  • 广东省住房和城乡建设厅关于发布广东省标准《球墨铸铁排水管道工程技术规程》的公告

  • 前 言

  • 1 总则

  • 2 术语符号

    • 2.1 术语

    • 2.2 符号

  • 3 管材管件、接口及附属构筑物

    • 3.1 一般规定

    • 3.2 管材

    • 3.3 接口

    • 3.4 球墨铸铁成品检查井

  • 4 设计

    • 4.1 一般规定

    • 4.2 工艺设计

    • 4.3 结构设计

    • 4.4 基础与地基处理

    • 4.5 沟槽开挖与回填

    • 4.6 顶管设计

  • 5 施工

    • 5.1 一般规定

    • 5.2 装卸、运输与储存

    • 5.3 土建施工

    • 5.4 安装

    • 5.5 顶管施工

    • 5.6 附属构筑物施工

  • 6 功能性试验

    • 6.1 水压试验

    • 6.2 闭水试验

    • 6.3 闭气试验

  • 7 工程验收

  • 8 维护及维修

    • 8.1 维护

    • 8.2 维修

  • 9 信息化数据管理

  • 附录A 壁厚与压力计算方法

  • 附录B 壁厚选择

  • 附录C 顶管专用球墨铸铁排水管道尺寸参数

  • 附录D 管道外径DE的尺寸及公差

  • 附录E 球墨铸铁成品检查井

  • 附录F 埋地球墨铸铁排水管的强度计算

  • 附录G 非埋地球墨铸铁排水管的强度计算

  • 附录H 球墨铸铁排水管的变形计算

  • 附录J 管的环刚度和最大允许变形率

  • 附录K 数字芯片/电子标签信息表

  • 附录L 闭气法试验方法

  • 本规程用词说明

  • 引用标准名录

收起

英文目录

  • 1 General provisions

  • 2 Terms and symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Pipe,fitting,joint and ancillary structure

    • 3.1 General requirements

    • 3.2 Pipe

    • 3.3 Joint

    • 3.4 Ductile iron inspection chamber

  • 4 Design

    • 4.1 General requirements

    • 4.2 Technological design

    • 4.3 Structural design

    • 4.4 Bedding and foundation treatment

    • 4.5 Trench excavation and backfill

    • 4.6 Pipe-jacking design

  • 5 Construction

    • 5.1 Loading,transportation and storage

    • 5.2 Construction preparation

    • 5.3 Structural construction

    • 5.4 Installation

    • 5.5 Pipe-jacking construction

    • 5.6 Construction of ancillary structures

  • 6 Functional test

    • 6.1 Water pressure test

    • 6.2 Water obturation test

    • 6.3 Pneumatic pressure test

  • 7 Project acceptance

  • 8 Maintenance and repair

    • 8.1 Maintenance

    • 8.2 Repair

  • 9 Information data management

  • Appendix A Calculation of wall thickness and pipeline pressure

  • Appendix B Selection of wall thickness

  • Appendix C Dimension parameters of ductile iron drainage pipe specifically used in pipe jacking

  • Appendix D Dimension and tolerance of the pipe outside diamete(rDE)

  • Appendix E Ductile iron inspection chamber

  • Appendix F Strength calculation of buried ductile iron drainage pipe

  • Appendix G Strength calculation of uncovered ductile iron drainage pipe

  • Appendix H Deformation calculation of ductile iron drainage pipe

  • Appendix J Radial stiffness and maximum allowable deformation rate of pipe

  • Appendix K Water obturation test

  • Appendix L Acceptance record sheet and appraisal report

  • Explanation of wording in this specification

  • List of quoted standards

收起

公告

广东省住房和城乡建设厅关于发布广东省标准《球墨铸铁排水管道工程技术规程》的公告

3-30-00
粤建公告〔2021)25号
经组织专家委员会审查,现批准《球墨铸铁排水管道工程技术规程》为广东省地方标准,编号为DBJ/T 15-218-2021。本标准自2021年8月1日起实施。
本标准由广东省住房和城乡建设厅负责管理,由主编单位负责具体技术内容的解释,并在广东省住房和城乡建设厅门户网站(http://zfcxjst.gd.gov.cn)公开。
广东省住房和城乡建设厅
2021年5月14日
收起

本书术语

术语 英文名称 术语 英文名称
球墨铸铁排水管 DI pipe for sewerage application 球墨铸铁排水管件 DI fitting for sewerage application
接口 joint 非埋地管道 uncovered pipeline
土弧基础 arc shaped soil bedding 水压试验 water pressure test
闭水试验 water obturation test 闭气试验 pneumatic pressure test
球墨铸铁成品检查井 DI inspection chamber 允许工作压力 allowable operating pressure

确定