高级检索 术语库 公告 网络出版服务许可证：（署）网出证（京）第457号
知识服务平台

宏图悦读 发改社微课程

纸书购买 扫码关注

搜索 关键词 / 标准名 / 标准号

AI智能检索 输入您的问题

    高级检索
    登录/注册
    首页 >标准规范

    建筑结构加固工程施工质量验收规范

    Code for Acceptance of Construction Quality of Strengthening Building Structures

    • 【标准号】　 GB 50550-2010
    • 【发布日期】　2010-07-15
    • 【标准状态】　现行
    • 【实施日期】　2011-02-01
    • 【适用范围】　 This code is applicable to the construction process control and construction quality acceptance of the strengthening engineering of concrete structure , masonry structure and steel structure .

    会员免费阅读，去 购买

    收藏 追踪 分享
    • 标准信息
    • 中文目录
    收起

    标准信息

    • 【主编部门】
      Ministry of Housing and Urban-Rural Development of the People's Republic of China
    • 【批准部门】

      Ministry of Housing and Urban-Rural Development

    • 【发布单位】

      Ministry of Housing and Urban-Rural Development of the People's Republic of China；General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China

    • 【参编单位】

      Tongji University；Hunan University；Wuhan University；Fuzhou University；Shandong Jianzhu University；Dalian Institute of Chemical Physics,Chinese Academy of Sciences；Shandong Provincial Academy of Building Research；Liaoning Building Science Reach Institute；Chongqing Institute of Building Research；Shanghai Construction Project Quality Supervision Station；Shandong Provincial Construction Engineering Quality Supervision Station；Chengdu Construction Project Quality Supervision Center；Haikou Construction Project Quality Supervision Center；Xiamen Construction Engineering Quality and Safety Supervision Station；Shanghai Jiaguhang Constructional Technology Engineering Co.,Ltd.；Araldite Advanced Chemical materials（Guangdong）Co.,Ltd.；Xiamen Zhonglian Structural Adhesion Co.,Ltd.；Construction Technology Engineering Corporation of Tongji University；Dalian Kaihua new technology engineering Co.,Ltd.；China Huaxi Enterprises Corporation；Fischer Fixings Co.,Ltd.；Hilti（China）Co.,Ltd.；Jiangsu Dongnan Special Engineering and Technology Co.,Ltd.；Shanghai Xiegu Construction Material Co.,Ltd.；Wuhan Changjiang Reinforcement Technology Co.,Ltd.；Hubei Desheng Strengthening Limited Company for Structure Engineering；Changsha Good Bond Construction Technic Development Co.,Ltd.；Shanghai Yichang Carbon Fiber Material Co.,Ltd.；Shanghai Tonghua Special Civil Engineering Co.,Ltd.

    • 【主要起草人】

      Sun Qianyuan；Liang Shuang；Liang Tan；Wu Shanneng；Huang Xingdi；Lin Wenxiu；Bu Liangtao；Cui Shiqi；Zheng Jianlan；Cheng Bo；Zhang Xin；Mo Qunsu；Li Mingzhu；Jiang Songyan；Lu Tonghe；Pan Yanping；Wei Jiandong；Chen Kerong；Feng Honghao；Wang Limin；Zhang Chengying；Chen Youming；Zhang Ye；Xu Dexin；Li Liping；Zhang Shouwen；Xiao Wen；Wang Conghui；Zhou Ji；Wang Xiaobo；Hou Faliang；Peng Bo；Zhang Tanxian；Zhou Haiming；He Yingming；Liu Yannian

    • 【主要审查人】

      Liu Xila；Dai Baocheng；Gao Xiaowang；Zhang Jiaqi；Shen Kun；Li Derong；Jiang Shoushi；Wang Qinglin；Wan Haiying；Tang Daixin；Xu Gonghe；Cheng Yizu；Chen Yuexi；Luo Jinyuan

    收起

    中文目录

    • Announcement　of　the　Ministry　of　Housing　and　Urban-Rural　Development　of　the　People's　Republic　of　China　No.683

    • Foreword

    • 1　General　Provision

    • 2　Terms

      • 2.1　General　Terms

      • 2.2　Material　Terms

      • 2.3　Construction　Terms

    • 3　Basic　Requirement

    • 4　Materials

      • 4.1　Concrete　Materials

      • 4.2　Steels

      • 4.3　Welding　Materials

      • 4.4　Structural　Adhesives

      • 4.5　Fiber　Reinforced　Polymers

      • 4.6　Cements　and　Sands

      • 4.7　Polymer　Motar

      • 4.8　Crack　Repairs　with　Injections

      • 4.9　Interfacial　Adhesives　for　Concrete

      • 4.10　Grouts　for　Structural　Strengthening

      • 4.11　Anchors

    • 5　Strengthening　with　Enlarged　Concrete　Sections

      • 5.1　General　Requirement

      • 5.2　Interface　Treatment

      • 5.3　Enlarge　Concrete　Section

      • 5.4　Inspection　of　Construction　Quality

    • 6　Strengthening　with　Replaced　RC　Structural　Elements

      • 6.1　General　Requirement

      • 6.2　Real-time　Control　for　Unloading

      • 6.3　Local　removal　and　Interface　Treatment　of　Concrete

      • 6.4　Replacement　of　Concrete

      • 6.5　Inspection　of　Construction　Quality

    • 7　RC　Elements　Strengthened　with　Wrapped　Wires

      • 7.1　General　Requirement

      • 7.2　Interface　Treatment

      • 7.3　Wrapping　with　Wires

      • 7.4　Inspection　of　Construction　Quality

    • 8　RC　Member　Strengthened　by　Externally　Applied　Prestress

      • 8.1　General　Requirement

      • 8.2　Fabrication　and　Installation

      • 8.3　Pre-stredding　Tension

      • 8.4　Inspection　of　Construction　Quality

    • 9　Strengthening　by　Externally　Bonded　or　Wrapped　Shaped　Steel

      • 9.1　General　Requirement

      • 9.2　Fabrication　of　Steel　Skeleton

      • 9.3　Surface　Treatment

      • 9.4　Installation　and　Welding　of　Steel　Skeleton

      • 9.5　Injection　of　Grouts

      • 9.6　Inspection　of　Construction　Quality

    • 10　Strengthening　by　Externally　Bonded　Fiber　Reinforced　Polymers

      • 10.1　General　Requirement

      • 10.2　Interface　Treatment

      • 10.3　Bonding　of　Fiber　Reinforced　Polymers

      • 10.4　Inspection　of　Construction　Quality

    • 11　Strengthening　by　Bonding　Steel　Plates

      • 11.1　General　Requirement

      • 11.2　Interface　Treatment

      • 11.3　Bonding　of　Steel　Plates

      • 11.4　Inspection　of　Construction　Quality

    • 12　Strengthening　by　Polymer　Motar　Reinforced　with　Steel　Wire　Mesh

      • 12.1　General　Requirement

      • 12.2　Interface　Treatment

      • 12.3　Installation　of　Steel　Wire　Mesh

      • 12.4　Application　of　Polymer　Motar

      • 12.5　Inspection　of　Construction　Quality

    • 13　Strengthening　Concrete　or　Masonry　Members　by　Steel　Bar　Mesh　and　Motar　Layer

      • 13.1　General　Requirement

      • 13.2　Interface　Treatment

      • 13.3　Installation　of　Steel　Bar　Meshes　and　Construction　of　Motar　Layers

      • 13.4　Inspection　of　Construction　Quality

    • 14　Strengthening　Masonry　Columns　with　Prestressed　Rods

      • 14.1　General　Requirement

      • 14.2　Interface　Treatment

      • 14.3　Fabrication　of　Rods

      • 14.4　Installation　and　Stress　of　Rods

      • 14.5　Inspection　of　Construction　Quality

    • 15　Strengthening　Steel　Members　with　Enlarged　Section

      • 15.1　General　Requirements

      • 15.2　Interface　Treatment

      • 15.3　Fabrication　of　Steel　Elements

      • 15.4　Installation　and　Slicing　Construction　of　Newly-added　Steel　Elements

      • 15.5　Inspection　of　Construction　Quality

    • 16　Strengthening　Welds　in　Steel　Structures

      • 16.1　General　Requirement

      • 16.2　Treatment　of　Welding　Surface

      • 16.3　Strengthening　of　Welding

      • 16.4　Quality　Inspection　of　Welding

    • 17　Repair　Cracks　in　Steel　Structures

      • 17.1　General　Requirement

      • 17.2　Strengthening　of　Welds　and　Quality　Inspection

    • 18　Repair　Cracks　in　Concrete　and　Masonry　Structures

      • 18.1　General　Requirement

      • 18.2　Surface　Treatment

      • 18.3　Seal　Crack　Surfaces

      • 18.4　Fill　Cracks　with　Flexible　Materials

      • 18.5　Inject　Cracks　with　Epoxy

      • 18.6　Quality　Inspection

    • 19　Plant　Rebars

      • 19.1　General　Requirement

      • 19.2　Surface　Treatment

      • 19.3　Plant　Rebars

      • 19.4　Quality　Inspection　of　Construction

    • 20　Anchors

      • 20.1　General　Requirement

      • 20.2　Installation　of　Anchors

      • 20.3　Quality　Inspection

    • 21　Grouts

      • 21.1　General　Requirement

      • 21.2　Safety　Review　of　Construction　Drawings

      • 21.3　Surface　Treatment

      • 21.4　Application　of　Grouts

      • 21.5　Quality　Inspection

    • 22　Acceptance　of　Building　Structure　Strengthening　Engineering

    • Appendix　A　Division　of　Sub-subsection　Projects　and　Subitem　in　Structural　Strengthening　Engineering

    • Appendix　B　Records　of　Quality　Inspection

    • Appendix　C　Technical　Specification　for　High-pressure　Water　Jet

      • C.1　Application　Scope

      • C.2　Operation　Requirements

      • C.3　Detection　and　Evaluation　of　Treatment　Effect

    • Appendix　D　Sample　Specification　for　Site　Repeat　Test　of　Materials　or　Products　for　Strengthening

    • Appendix　E　Specifications　for　Laboratory　Test　and　Evaluation　of　Normal　Tensile　Bonding　Strength　between　Strengthening　Material　and　Substrate　Bonded　by　Adhesive　Material

      • E.1　Application　Scope

      • E.2　Test　Equipment

      • E.3　Specimen

      • E.4　Test　Environment

      • E.5　Test　Procedures

      • E.6　Test　Results

      • E.7　Qualification　Evaluation　of　Test　Results

    • Appendix　F　Specifications　for　Test　and　Evaluation　of　Debonding　Performance　of　Structural　Adhesives　under　T-Peel　Impacts

      • F.1　Application　Scope

      • F.2　Principles

      • F.3　Test　Device

      • F.4　Specimen

      • F.5　Test　Conditions

      • F.6　Test　Procedures

      • F.7　Expression　of　Test　Results

      • F.8　Evaluation　of　Test　Results

      • F.9　Test　Reports

    • Appendix　G　Test　of　Non-volatile　Matter　of　Structural　Adhesives

      • G.1　Application　Scope

      • G.2　Instruments　and　Equipment

      • G.3　Preparation　Work　Before　Testing

      • G.4　Sampling　and　State　Adjustment

      • G.5　Test　Procedures

      • G.6　Result　Expression

      • G.7　Test　Reports

    • Appendix　H　Test　of　Durability　Performance　of　Structural　Adhesive　under　Circles　of　Wet　and　Heat

      • H.1　Application　Scope　and　Application　Conditions

      • H.2　Test　Equipment　and　Test　Water

      • H.3　Specimen

      • H.4　Test　Conditions

      • H.5　Test　Procedures

      • H.6　Test　Results

      • H.7　Test　Reports

    • Appendix　J　Quick　Test　on　Site　of　Durability　Performance　of　Structural　Adhesive　under　Circles　of　Wet　and　Heat

      • J.1　Application　Scope

      • J.2　Test　Equipment　and　Device

      • J.3　Specimen

      • J.4　Repeat　Test　Conditions

      • J.5　Repeat　Test　Procedures

      • J.6　Calculation　and　Evaluation　of　Repeat　Test　Results

      • J.7　Test　Reports

    • Appendix　K　Test　Method　of　Initial　Viscosity

      • K.1　Basic　Requirements

      • K.2　Instruments　and　Equipment

      • K.3　Test　Conditions

      • K.4　Sample　Preparation

      • K.5　Test　Procedures

      • K.6　Result　Calculation　and　Representation

    • Appendix　L　Determination　of　Thixotropic　Index　of　Structural　Adhesive

      • L.1　Application　Scope

      • L.2　Instruments　and　Equipment

      • L.3　Samples

      • L.4　Test　Procedures

      • L.5　Result　Calculation　and　Representation

    • Appendix　M　Quick　Determination　of　K　Number　of　Carbon　Fiber　Reinforced　Polymers

    • Appendix　N　Test　Methods　of　Interface　Shear　Strength　of　Fiber　Reinforced　Polymers

      • N.1　Application　Scope

      • N.2　Specimen　Mould

      • N.3　Sample　Preparation

      • N.4　Specimen　Fabrication

      • N.5　Test　Conditions

      • N.6　Test　Procedures

      • N.7　Test　Results

    • Appendix　P　Test　Method　of　Split　Tensile　Strength　of　Anchoring　Type　Structural　Adhesives　and　Polymer　Motar

      • P.1　Application　Scope

      • P.2　Specimens

      • P.3　Test　Equipment　and　Device

      • P.4　Test　Procedures

      • P.5　Test　Results

    • Appendix　Q　Test　Method　of　Flexural　Strength　of　Motar　and　Grout　for　Structural　Strengthening

      • Q.1　Application　Scope

      • Q.2　Test　Device　and　Equipment

      • Q.3　Sampling　Rules

      • Q.4　Specimen　Preparation

      • Q.5　Test　Procedures

      • Q.6　Test　Results

    • Appendix　R　Test　Method　of　Shear　Strength　under　Tension　of　Polymer　Motar　and　Composite　Motar（Steel　Sleeve　Method）

      • R.1　Application　Scope

      • R.2　Test　Equipment　and　Device

      • R.3　Specimens

      • R.4　Specimen　Preparation

      • R.5　Test　Conditions

      • R.6　Test　Procedures

      • R.7　Test　Results

    • Appendix　S　Test　and　Determination　of　Shear　Bonding　Strength　of　Structural　Interfacial　Adhesives（Agents）

      • S.1　Application　Scope

      • S.2　Test　Equipment　and　Device

      • S.3　Preparation　of　Test　Coupon　and　Specimen

      • S.4　Test　Conditions

      • S.5　Test　Procedures

      • S.6　Test　Results

      • S.7　Qualification　Evaluation　of　Test　Results

    • Appendix　T　Sampling　Rules　and　Determination　on　Site　of　Newly　Added　Concrete　Strength

    • Appendix　U　Test　and　Determination　of　Normal　Tensile　Bonding　Strength　between　Bonded　Material　and　Substrate

      • U.1　Application　Scope

      • U.2　Test　Equipment

      • U.3　Sampling　Rules

      • U.4　Specimen　Preparation

      • U.5　Test　Procedures

      • U.6　Test　Results

      • U.7　Qualification　Evaluation　of　Test　Results

    • Appendix　V　Provisions　on　Compressive　Strength　Determination　for　the　Outer　Added　Mortar　Surface　Layer　of　Bearing　Member　with　Rebounding　Method

    • Appendix　W　On　Site　Test　and　Determination　of　Anchorage　Capacity

      • W.1　Application　Scope　and　Application　Condition

      • W.2　Sampling　Rules

      • W.3　Requirements　for　Instruments　and　Equipment

      • W.4　Drawing　Inspection　Method

      • W.5　Evaluation　of　Inspection　Result

    • Appendix　Y　Steel　Bar　Inhibitor　Application　Requirements

      • Y.1　General　Requirements

      • Y.2　Operational　Requirements　of　Spraying-type　Steel　Bar　Corrosion　Inhibitor

      • Y.3　Detection　and　Evaluation　for　Application　Effect　of　Corrosion　Inhibitor

    • Explanation　of　Wording　in　This　Code

    • List　of　Quoted　Standards

    收起

    英文目录

    收起

    本书术语

    术语 英文名称 术语 英文名称
    Structure strengthening engineering Quality of structure strengthening engineering
    Acceptance Site inspection
    Repeat test Lot
    Inspection lot Evidential sampling
    Dominant item General item

    标准推荐

    推荐图书

    建筑结构工程资料管理与表格填写范例

    作者：北京土木建筑学会
    建筑结构与抗震设计标准规范汇编

    作者：中国计划出版社
    建筑　路桥　市政工程施工工艺标准建筑结构工程施工工艺标准

    作者：北京城建集团
    留言反馈 联系我们 帮助中心
    扫码分享

    复制链接

    选择收藏夹

    管理收藏夹

    确定

    功能项目 注册用户 普通会员 高级会员/企业版
    计划版标准阅读 仅限国标条文 库内全部标准 库内全部标准
    AI智能检索
    标准关联查询
    强制性条文聚合
    标准资源对比
    术语查询
    知识库管理
    服务资讯查看
    原版标准阅读
    条文说明阅读
    标准文字复制(200字/次) 100次/月 不限
    标准追踪
    行业定制
    实用表格下载(仅PC端)
    电子书与视频
    专家解读视频 免费视频 免费视频 全部视频
    标准查重(审校) 企业版定制
    数字阅读终端 企业版定制