4　保温系统粘结性能检验

• 4.1　保温板与基层的拉伸粘结强度

• 4.2　保温板与基层粘结面积比

• 4.3　锚栓拉拔试验

7　建筑气密性能检验

• 7.1　一般规定

• 7.2　压差法

• 7.3　示踪气体法

• 7.4　结果判定

9　围护结构传热系数检验

• 9.1　一般规定

• 9.2　热流计法

• 9.3　热箱法

• 9.4　结果判定

10　供暖、通风空调系统节能检验

• 10.1　一般规定

• 10.2　室内平均温度、平均相对湿度

• 10.3　室外管网热损失率

• 10.4　水流量

• 10.5　通风与空调系统风量

• 10.6　各风口风量

• 10.7　风道系统单位风量耗功率

• 10.8　新风热回收机组换热效率

• 10.9　风管系统漏风量

11　可再生能源应用系统节能检验

• 11.1　地源热泵系统供热量、供冷量

• 11.2　太阳能热水系统得热量

• 11.3　太阳能光伏发电系统光电转化效率和光伏组件背板温度

12　照明系统节能检验

• 12.1　一般规定

• 12.2　平均照度与照明功率密度

• 12.3　谐波电压和谐波电流

• 12.4　功率因数

• 12.5　电压偏差

• 12.6　照明场所统一眩光值

• 12.7　照明场所相关色温、一般显色指数

• 12.8　照明场所闪变指数、频闪效应可视度

附录B　供暖系统供热量检测方法

• B.1　一般规定

• B.2　超声波热流量计法

• B.3　超声波流量计法

4　Inspection of adhesive performance of Insulation System

• 4.1　Bond strength of insulation boards and the grass roots

• 4.2　Bonded area of insulation boards and the grass roots

• 4.3　Anchor bolt pullout test

7　Inspection of airtightness of building envelope

• 7.1　General requirements

• 7.2　Fan pressurization method

• 7.3　Tracer gas technique

• 7.4　Results judgment

9　Inspection of heat transfer coefficients of building envelopes

• 9.1　General requirements

• 9.2　Heat flow method

• 9.3　Heat box method

• 9.4　Results judgment

10　Energy saving inspection of heating， ventilation and air conditioning systems

• 10.1　General requirements

• 10.2　Indoor average temperature and relative humidity

• 10.3　Outdoor heating system pipe network thermal loss rate

• 10.4　Water discharge

• 10.5　Air volume of ventilation and air conditioning system

• 10.6　Air volume of tuyere

• 10.7　Airflow fan unit power consumption

• 10.8　Heat exchange efficiency of outdoor air energy recovery components

• 10.9　Air leakage rate of duct system

11　Energy saving detection of renewable energy application systems

• 11.1　Heating exchange system of earth-source heat pumps cooling

• 11.2　Heating capacity of solar water heating system

• 11.3　Photovoltaic conversion efficiency of solar power generation system and temperature of photovoltaic module ackplate

12　Inspection of energy-saving of lighting system

• 12.1　General requirements

• 12.2　Average illumination and lighting power density

• 12.3　Harmonic coltage and harmonic current

• 12.4　Power factor

• 12.5　Deviation of supply voltage

• 12.6　Unified glare rating for lighting locations

• 12.7　Correlated colour temperature and colour rendering index for lighting locations

• 12.8　Hort-termflicker indicator of illuminanceand stroboscopic effect visibility measure for lighting locations

Appendix B　Method of heating System heating Quantity