GB 50730-2011 GB 50730-2011冶金机械液压、润滑和气动设备工程施工规范:英文 - 工标库
由工标库AI生成
查看更多
GB 50730-2011 GB 50730-2011冶金机械液压、润滑和气动设备工程施工规范:英文现行
收藏
-
Announcement of Ministry of Housing and Urban-Rural Development of the People s Republic of China
-
Foreword
-
1 General Provisions
-
2 Basic Requirements
-
3 Mobilization of Equipment and Materials
-
3.1 Equipment Mobilization
-
3.2 Material Mobilization
-
4 Equipment Installation
-
4.1 General Requirements
-
4.2 Equipment Foundation
-
4.3 Base Line and Base Point for Equipment Installation
-
4.4 Anchor Bolt
-
4.5 Shim
-
4.6 Oil Tank
-
4.7 Cooler and Steam Heater
-
4.8 Filter
-
4.9 Accumulator
-
4.10 Pump and Pump Set
-
4.11 Complete Set of Hydraulic（Lubrication）Station
-
4.12 Valve Stand and Valve
-
4.13 Oil Purifier
-
4.14 Lubrication Grease Pump Station，Oil Filler and Oil Distributor
-
4.15 Water-separating Gas Filter，Atomized Lubricator（Oil Separator）and Control Valve
-
5 Pipe Processing and Installation
-
5.1 General Requirements
-
5.2 Pipe Processing
-
5.3 Pipe Welding
-
5.4 Pipe Pickling
-
5.5 Pipe Installation
-
6 Pipe Flushing，Purging and Pressure Test
-
6.1 Pipe Flushing
-
6.2 Pipe Purging
-
6.3 Pipe Pressure Test
-
7 Commissioning and Test Run
-
7.1 General Requirements
-
7.2 Commissioning and Test Run of Hydraulic System
-
7.3 Commissioning and Test Run of Lubrication Oil System
-
7.4 Commissioning and Test Run of Lubrication Grease System
-
7.5 Commissioning and Test Run of Oil Mist Lubrication System
-
7.6 Commissioning and Test Run of Process Lubrication System
-
7.7 Commissioning and Test Run of Pneumatic System
-
8 Pipe Painting
-
9 Safety and Environmental Protection
-
Explanation of Wording in This Code
-
Normative Standard
