点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
DB13(J)/T 300-2019 城市综合管廊工程施工及质量验收规范 - 工标库

DB13(J)/T 300-2019 城市综合管廊工程施工及质量验收规范 现行

发布日期:2019-03-25

实施日期:2019-07-01

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 河北省住房和城乡建设厅公告

  • 前言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

    • 3.1 施  工

    • 3.2 验  收

  • 4 施工测量

    • 4.1 一般规定

    • 4.2 控制测量

    • 4.3 定向测量

    • 4.4 平面测量

    • 4.5 高程测量

  • 5 地基与基础

    • 5.1 一般规定

    • 5.2 基坑支护

    • 5.3 基坑开挖

    • 5.4 地基处理

    • 5.5 基坑回填

    • 5.6 质量验收标准

  • 6 现浇混凝土综合管廊结构

    • 6.1 一般规定

    • 6.2 模板分项工程

    • 6.3 钢筋分项工程

    • 6.4 混凝土分项工程

    • 6.5 现浇结构分项工程

    • 6.6 质量验收标准

  • 7 装配式综合管廊结构

    • 7.1 一般规定

    • 7.2 构件运输

    • 7.3 进场检查与堆放

    • 7.4 安装与连接

    • 7.5 质量验收标准

  • 8 盖挖法

    • 8.1 一般规定

    • 8.2 支护体系

    • 8.3 盖板体系

    • 8.4 土石方工程

    • 8.5 质量验收标准

  • 9 浅埋暗挖法

    • 9.1 一般规定

    • 9.2 竖  井

    • 9.3 地层超前支护及加固

    • 9.4 土方开挖

    • 9.5 初期支护

    • 9.6 二次衬砌

    • 9.7 地下施工作业环境

    • 9.8 质量验收标准

  • 10 矿山法

    • 10.1 一般规定

    • 10.2 洞口、明洞与浅埋段工程

    • 10.3 岩体(洞身)开挖

    • 10.4 初期支护

    • 10.5 二次衬砌

    • 10.6 质量验收标准

  • 11 盾构法

    • 11.1 一般规定

    • 11.2 工作井

    • 11.3 盾构掘进

    • 11.4 管片拼装

    • 11.5 同步注浆

    • 11.6 质量验收标准

  • 12 TBM法

    • 12.1 一般规定

    • 12.2 TBM施工工作井

    • 12.3 TBM始发及掘进

    • 12.4 非管片支护隧道支护

    • 12.5 管片支护隧道

    • 12.6 质量验收标准

  • 13 预制顶推法

    • 13.1 一般规定

    • 13.2 工作井

    • 13.3 后背及后背墙

    • 13.4 顶推施工

    • 13.5 管廊顶进

    • 13.6 质量验收标准

  • 14 附属构筑物

    • 14.1 一般规定

    • 14.2 各类孔口

    • 14.3 质量验收标准

  • 15 防水工程

    • 15.1 一般规定

    • 15.2 现浇混凝土综合管廊结构

    • 15.3 装配式混凝土综合管廊结构

    • 15.4 浅埋暗挖法

    • 15.5 预制顶推法

    • 15.6 盾构法

    • 15.7 矿山法

    • 15.8 TBM法

    • 15.9 防水层施工

    • 15.10 质量验收标准

  • 16 监控量测

    • 16.1 一般规定

    • 16.2 明(盖)挖法监控量测

    • 16.3 浅埋暗挖法施工监控量测

    • 16.4 盾构法施工监控量测

    • 16.5 预制顶推法监控量测

    • 16.6 矿山法施工监控量测

    • 16.7 TBM法施工监控量测

    • 16.8 监测报警

    • 16.9 监测成果

  • 17 机电设备安装

    • 17.1 一般规定

    • 17.2 支吊架系统

    • 17.3 通风系统

    • 17.4 供电系统

    • 17.5 照明系统

    • 17.6 给水排水系统

    • 17.7 消防系统

    • 17.8 标识系统

    • 17.9 质量验收标准

  • 18 监控报警及智慧管理系统

    • 18.1 一般规定

    • 18.2 监控系统

    • 18.3 火灾报警系统

    • 18.4 智慧管理系统

    • 18.5 质量验收标准

  • 19 季节性施工

    • 19.1 一般规定

    • 19.2 冬期施工

    • 19.3 高温施工

    • 19.4 雨期施工

  • 附录A 施工现场质量管理检查记录

  • 附录B 城市综合管廊工程的分部分项工程划分及工程代号

  • 附录C 检验批质量验收记录

  • 附录D 分项工程质量验收记录

  • 附录E 分部(子分部)工程质量验收记录

  • 附录F 单位(子单位)工程质量竣工验收记录

  • 附录G 测量技术要求及监测项目

  • 本规范用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms

  • 3 Basic Requirements

    • 3.1 Construction

    • 3.2 Acceptance

  • 4 Construction Survey

    • 4.1 General Requirements

    • 4.2 Control Survey

    • 4.3 Orientation Survey

    • 4.4 Plane Survey

    • 4.5 Vertical Survey

  • 5 Ground and Foundation

    • 5.1 General Requirements

    • 5.2 Foundation Pit Supporting

    • 5.3 Foundation Pit Excavation

    • 5.4 Foundation Rreatment

    • 5.5 Foundation Pit Backfilling

    • 5.6 Standard for Quality Acceptance

  • 6 Cast-in-site Concrete Utility Tunnel

    • 6.1 General Requirements

    • 6.2 Formwork

    • 6.3 Reinforcement

    • 6.4 Concrete

    • 6.5 Cast-in-site Stucture

    • 6.6 Standard for Quality Acceptance

  • 7 Precast Concrete Utility Tunnel

    • 7.1 General Requirements

    • 7.2 Components Rransportation

    • 7.3 Approach Inspection and Stacking

    • 7.4 Installation and Connection

    • 7.5 Standard for Quality Acceptance

  • 8 Covered Excavation Method

    • 8.1 General Requirements

    • 8.2 Support System

    • 8.3 Cover Plate System

    • 8.4 Earth-Rock Works

    • 8.5 Standard for Quality Acceptance

  • 9 Shallow Undercutting Method

    • 9.1 General Requirements

    • 9.2 Shaft

    • 9.3 Strata Supporting and Grouting Reinforcement in Advance

    • 9.4 Earth Excavation

    • 9.5 Initial Support

    • 9.6 Secondary Lining

    • 9.7 Working Environment of Underground Construction

    • 9.8 Standard for Quality Acceptance

  • 10 Mining Method

    • 10.1 General Requirements

    • 10.2 Tunnel Portal,Opencut Tunnel and Sshallow Buried Section Project

    • 10.3 Rock Mass(Tunnel)Excavation

    • 10.4 Initial Support

    • 10.5 Secondary Lining

    • 10.6 Standard for Quality Acceptance

  • 11 Shield Method

    • 11.1 General Requirements

    • 11.2 Working Shaft

    • 11.3 Shield Tunneling

    • 11.4 Segment Installation

    • 11.5 Synchro Grouting

    • 11.6 Standard for Quality Acceptance

  • 12 Tunnel Boring Machine Method

    • 12.1 General Requirements

    • 12.2 TBM Working Well

    • 12.3 TBM Launching and Tunneling

    • 12.4 No-Segment Support

    • 12.5 Segment Support

    • 12.6 Standard for Quality Acceptance

  • 13 Precast Incremental Launching Method

    • 13.1 General Requirements

    • 13.2 Working shaft

    • 13.3 Back and Back Wall

    • 13.4 Construction of Incremental Launching

    • 13.5 Utility Tunnel Jacking

    • 13.6 Standard for Quality Acceptance

  • 14 Appurtenant Structure

    • 14.1 General Requirements

    • 14.2 Orifices

    • 14.3 Standard for Quality Acceptance

  • 15 Waterproof Engineering

    • 15.1 General Requirements

    • 15.2 Cast-in-site Concrete Utility Tunnel

    • 15.3 Precast Concrete Utility Tunnel

    • 15.4 Shallow Undercutting Method

    • 15.5 Precast Incremental Launching Method

    • 15.6 Shield Method

    • 15.7 Mining Method

    • 15.8 Tunnel Boring Machine Method

    • 15.9 Waterproof Layer Construction

    • 15.10 Standard for Quality Acceptance

  • 16 Monitoring Measurement

    • 16.1 General Requirements

    • 16.2 Monitoring Measurement of Excavation(Covered Excavation)Method

    • 16.3 Monitoring Measurement of Shallow Undercutting Method

    • 16.4 Monitoring Measurement of Shield Method

    • 16.5 Monitoring Measurement of Precast Incremental Launching Method

    • 16.6 Monitoring Measurement of Mining Method

    • 16.7 Monitoring Measurement of Tunnel Boring Machine Method

    • 16.8 Monitoring and Alarm

    • 16.9 Monitoring Results

  • 17 Mechanical and Electrical Equipment Installation

    • 17.1 General Requirements

    • 17.2 Support and Hanger System

    • 17.3 Ventilation System

    • 17.4 Power Supply System

    • 17.5 Lighting System

    • 17.6 Water Supply and Drainage System

    • 17.7 Fire Preventing System

    • 17.8 Sign System

    • 17.9 Standard for Quality Acceptance

  • 18 Monitoring,Alarm and Intelligent Management System

    • 18.1 General Requirements

    • 18.2 Monitoring System

    • 18.3 Alarm System

    • 18.4 Intelligent Management System

    • 18.5 Standard for Quality Acceptance

  • 19 Seasonal Construction

    • 19.1 General Requirements

    • 19.2 Construction in Winter

    • 19.3 Construction at High Temperatures

    • 19.4 Construction in Raining Season

  • Appendix A Records of Quality Manangement Inspection in Construction Site

  • Appendix B Division and Project Code of the Division and Subdivision Engineering

  • Appendix C Records of Inspection Lots for Quality Acceptance

  • Appendix D Records of Subdivision Engineering for Quality Acceptance

  • Appendix E Records of Division(Subdivision)Engineering for Quality Acceptance

  • Appendix F Records of Unit(Subunit)Engineering for Quality Acceptance

  • Appendix G Measuring Technical Requirements and Monitoring Items

  • Explanation of Wording in This Code

  • List of Quoted Standards

河北省住房和城乡建设厅公告

3-30-00
2019年 第14号
河北省住房和城乡建设厅 关于发布《城市综合管廊工程施工及质量验收规范》的公告
《城市综合管廊工程施工及质量验收规范》(编号为DB13(J)/T 300-2019)已经本机关审查并批准为河北省工程建设标准,现予发布,自2019年7月1日起实施。
河北省住房和城乡建设厅
2019年3月25日

本书术语

术语 英文名称
综合管廊 utility tunnel
现浇混凝土综合管廊结构 cast-in-site concrete utility tunnel
装配式综合管廊结构 precast utility tunnel
浅埋暗挖法 shallow undercutting method
盾构法 shield method
预制顶推法 precast incremental launching method
盖挖法 covered excavation method
矿山法 mining method
TBM法 tunnel boring machine method
工作井 working shaft

首页 |关于我们 |联系我们 |帮助中心

主办:中国发展改革出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称