点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB/T 50081-2019 混凝土物理力学性能试验方法标准 - 工标库

GB/T 50081-2019 混凝土物理力学性能试验方法标准 现行

发布日期:2019-06-19

实施日期:2019-12-01

替代以下标准: GB/T 50081-2002  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前 言

  • 1 总 则

  • 2 术语和符号

    • 2.1 术 语

    • 2.2 符 号

  • 3 基本规定

    • 3.1 一般规定

    • 3.2 试件的横截面尺寸

    • 3.3 试件的尺寸测量与公差

    • 3.4 试验或检测报告

  • 4 试件的制作和养护

    • 4.1 仪器设备

    • 4.2 取样与试样的制备

    • 4.3 试件的制作

    • 4.4 试件的养护

  • 5 抗压强度试验

  • 6 轴心抗压强度试验

  • 7 静力受压弹性模量试验

  • 8 泊松比试验

  • 9 劈裂抗拉强度试验

  • 10 抗折强度试验

  • 11 轴向拉伸试验

  • 12 混凝土与钢筋的握裹强度试验

  • 13 混凝土粘结强度试验

  • 14 耐磨性试验

    • 14.1 磨耗量法

    • 14.2 磨坑长度法

  • 15 导温系数试验

  • 16 导热系数试验

  • 17 比热容试验

  • 18 线膨胀系数试验

  • 19 硬化混凝土密度试验

  • 20 吸水率试验

  • 附录A 试验或检测报告样表

  • 附录B 圆柱体试件的制作

  • 附录C 圆柱体试件抗压强度试验

  • 附录D 圆柱体试件静力受压弹性模量试验

  • 附录E 圆柱体试件劈裂抗拉强度试验

  • 附录F θ/θ0值和at/D2值的关系表

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms and Symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Basic Requirements

    • 3.1 General Requirements

    • 3.2 Section Size of Specimen

    • 3.3 Dimensional Measurement and Tolerance of Specimen

    • 3.4 Test Report

  • 4 Preparation and Curing of Specimen

    • 4.1 Instrument Equipment

    • 4.2 Sampling and Preparation of Specimen

    • 4.3 Preparation of Specimen

    • 4.4 Curing of Specimen

  • 5 Test of Compressive Strength

  • 6 Test of Axial Compressive Strength

  • 7 Test of Elastic Modulus under Static Compressive Stress

  • 8 Test of Poisson's Ratio

  • 9 Test of Splitting Tensile Strength

  • 10 Test of Flexural Tensile Strength

  • 11 Test of Axial Tensile

  • 12 Test of the Bond Strength between Concrete and Steel Bars

  • 13 Test of Concrete Bond Strength

  • 14 Test of Abrasion Resistance

    • 14.1 Test of Abrasion Loss

    • 14.2 Test of Grinding Pit Length

  • 15 Test of Thermal Diffusivity

  • 16 Test of Thermal Conductivity

  • 17 Test of Specific Heat Capacity

  • 18 Test of Linear Expansion Coefficient

  • 19 Test of Density of Hardened Concrete

  • 20 Test of Water Absorption

  • Appendix A Style Sheet of Test Report

  • Appendix B Preparation and Curing of Cylinder Specimen

  • Appendix C Test of Compressive Stength of Cylinder Specimen

  • Appendix D Elastic Modulus under Static Compressive Stress Test of Cylinder Specimen

  • Appendix E Splitting Tensile Strength Test of Cylinder Specimen

  • Appendix F Table of Relation Between θ/θ0 Value and at/D2 Value

  • Explanation of Wording in This Standard

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

4-40-00
2019年 第174号
住房和城乡建设部关于发布国家标准《混凝土物理力学性能试验方法标准》的公告
现批准《混凝土物理力学性能试验方法标准》为国家标准,编号为GB/T 50081-2019,自2019年12月1日起实施。原《普通混凝土力学性能试验方法标准》GB/T 50081-2002同时废止。
本标准在住房和城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房和城乡建设部标准定额研究所组织中国建筑工业出版社出版发行。
中华人民共和国住房和城乡建设部
2019年6月19日

本书术语

术语 英文名称
混凝土 concrete
抗压强度 compressive strength
轴心抗压强度 axial compressive strength
静力受压弹性模量 elastic modulus under static compressive stress
泊松比 poisson's ratio
劈裂抗拉强度 splitting tensile strength
抗折强度 flexural tensile strength
轴向拉伸强度 axial tensile strength
粘结强度 bond strength
导温系数 thermal diffusivity

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称