点击右上角 ··· 选择
【发送给好友】或【分享到朋友圈】
GB/T 50344-2019 建筑结构检测技术标准 - 工标库

GB/T 50344-2019 建筑结构检测技术标准 现行

发布日期:2019-11-22

实施日期:2020-06-01

替代以下标准: GB/T 50344-2004  

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前 言

  • 1 总 则

  • 2 术语和符号

    • 2.1 术 语

    • 2.2 符 号

  • 3 基本规定

    • 3.1 建筑结构检测分类

    • 3.2 检测工作基本要求

    • 3.3 检测方法和抽样方案

    • 3.4 结构和构件的检测

    • 3.5 检测结论与判定

    • 3.6 建筑结构的评定

  • 4 混凝土结构

    • 4.1 一般规定

    • 4.2 原材料的质量及性能

    • 4.3 构件材料强度

    • 4.4 混凝土的性能

    • 4.5 构件的缺陷与损伤

    • 4.6 混凝土中钢筋检测

    • 4.7 装配式混凝土结构

    • 4.8 混凝土结构性能评定

  • 5 砌体结构

    • 5.1 一般规定

    • 5.2 砌筑块材

    • 5.3 砌筑砂浆

    • 5.4 砌体的力学性能

    • 5.5 砌筑质量与构造

    • 5.6 结构构件的损伤

    • 5.7 砌体结构的评定

  • 6 钢结构

    • 6.1 一般规定

    • 6.2 钢材的力学性能

    • 6.3 连 接

    • 6.4 节 点

    • 6.5 尺寸与偏差

    • 6.6 变形与损伤

    • 6.7 构造与稳定

    • 6.8 涂装防护

    • 6.9 结构性能实荷检验与动测

    • 6.10 既有钢结构的评定

  • 7 钢管混凝土结构和钢-混凝土组合结构

    • 7.1 一般规定

    • 7.2 钢管混凝土结构的检测

    • 7.3 钢-混凝土组合结构的检测

    • 7.4 钢管混凝土结构和钢-混凝土组合结构的评定

  • 8 木结构

    • 8.1 一般规定

    • 8.2 木材性能

    • 8.3 木材缺陷

    • 8.4 制作与安装偏差

    • 8.5 连接与构造

    • 8.6 变形损伤与防护措施

    • 8.7 既有木结构的评定

  • 9 既有轻型围护结构

    • 9.1 一般规定

    • 9.2 雪荷载

    • 9.3 风荷载

  • 附录A 间接测试方法测试结果的修正和验证

    • A.1 修正的规则

    • A.2 修正系数方法

    • A.3 修正量方法

    • A.4 综合系数和参数方法

    • A.5 验证方法

  • 附录B 结构动力测试方法和要求

    • B.1 基本规定

    • B.2 测试要求

    • B.3 数据处理

  • 附录C 建筑振动的测试

  • 附录D 结构和构件测量方法

  • 附录E 构件承载力可靠指标与变异系数

    • E.1 一般规定

    • E.2 作用效应的参数

    • E.3 构件承载力的变异系数

    • E.4 构件承载力的可靠指标和分项系数

  • 附录F 结构性能的静力荷载检验

    • F.1 一般规定

    • F.2 检验方案

    • F.3 适用性检验

    • F.4 荷载或构件系数检验

    • F.5 综合系数或可靠指标的检验

  • 附录G 游离氧化钙潜在危害的检测推断

  • 附录H 混凝土中氯离子含量测定

  • 附录J 钢筋表面硬度测试方法

  • 附录K 结构混凝土冻伤的检测方法

  • 附录L 混凝土中钢筋锈蚀状况的检测

  • 附录M 回弹检测烧结普通砖抗压强度

  • 附录N 钢材强度的里氏硬度检测方法

    • N.1 适用范围和测试仪器

    • N.2 检测技术

    • N.3 硬度计算及钢材强度换算

    • N.4 钢材强度的推定和强度等级的区分

  • 附录P 钢-混凝土组合结构中钢构件的无损探测方法

    • P.1 一般规定

    • P.2 仪器及基本操作要求

    • P.3 钢构件及其形状的探测

    • P.4 H形钢构件主控尺寸的测定

    • P.5 矩形钢构件的主控尺寸

    • P.6 圆形钢构件的探测

  • 附录Q 轻质围护结构瞬时风动力系数试验方法

    • Q.1 一般规定

    • Q.2 试验装置

    • Q.3 动力系数试验

  • 本标准用词说明

  • 引用标准名录

英文目录

  • 1 General Provisions

  • 2 Terms and Symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 General Requirements

    • 3.1 Inspection of Building Structure Classification

    • 3.2 General Provisions of Inspection

    • 3.3 Inspection Method and Sampling Scheme

    • 3.4 Inspection Technique of Structure and Constructional Element

    • 3.5 Inspection Conclusion and Evaluation

    • 3.6 Evaluation of Building Structure

  • 4 Concrete Structure

    • 4.1 General Requirements

    • 4.2 Quality and Performance of Raw Materials

    • 4.3 Strength of Structural Member

    • 4.4 Performance of Concrete

    • 4.5 Defects and Damage of Structural Member

    • 4.6 Inspection for Reinforcing Steel in Concrete

    • 4.7 Precast Concrete Structure

    • 4.8 Performance Evaluation of Concrete Structure

  • 5 Masonry Structure

    • 5.1 General Requirements

    • 5.2 Masonry Units

    • 5.3 Masonry Mortar

    • 5.4 Mechnical Properties of Masonry

    • 5.5 Quality of Construction and Detailing

    • 5.6 Defects of Structural Members

    • 5.7 Evaluation of Masonry Structure

  • 6 Steel Structures

    • 6.1 General Requirements

    • 6.2 Mechanical Properties of Materials

    • 6.3 Connection

    • 6.4 Joint

    • 6.5 Dimension and Deviation

    • 6.6 Damage and Deformation

    • 6.7 Structure and Stability

    • 6.8 Coating Protection

    • 6.9 Practical Load and Dynamic Load Tests of Structural Performance

    • 6.10 Evaluation of Existing Steel Structures

  • 7 Concrete Filled Steel Tubular Structure and Steel-concrete Composite Structure

    • 7.1 General Requirements

    • 7.2 Inspection of Concrete Filled Steel Tubular Structures

    • 7.3 Inspection of Steel-concrete Composite Structures

    • 7.4 Evaluation of Concrete Filled Steel Tubular Structures and Steel-concrete Composite Structures

  • 8 Timber Structure

    • 8.1 General Requirements

    • 8.2 Properties of Wood

    • 8.3 Defects of Wood

    • 8.4 Manufacture and Installation Error

    • 8.5 Connection and Construction

    • 8.6 Deformation and Protective Measures

    • 8.7 Evaluation of Existing Timber Structure

  • 9 Existing Light Enclosure Structure

    • 9.1 General Requirements

    • 9.2 Snow Load

    • 9.3 Wind Load

  • Appendix A Correction and Verification of Test Results of Indirect Test Method

  • Appendix B Structural Dynamic Characteristics Testing Methods and Requirements

  • Appendix C Testing of Building Vibration

  • Appendix D The Method of Surveying Structure and Member

  • Appendix E Static Load Test of Structural Performance

  • Appendix F Reliability Index and Variation Coefficient of Load-carrying Capacity of Member

  • Appendix G Test Deduction of Potential Hazards of Free Calcium Oxide

  • Appendix H Test of Chlorine Ion Content in Concrete

  • Appendix J Test Method of Surface Hardness of Steel Bar

  • Appendix K Test Method of Frostbite of Structural Concrete

  • Appendix L Test of Steel Bar Corrosion in Concrete

  • Appendix M Rebound Test for Compressive Strength of Common Sintered Brick

  • Appendix N Determination of Steel Strength by Leeb Hardness Test

  • Appendix P Nondestructive Detection Method of Steel Members in Steel-concrete Composite Structures

  • Appendix Q Test Method of Instantaneous Wind Dynamic Coefficient of Light Enclosure Structure

  • Explanation of Wording in This Standard

  • List of Quoted Standards

中华人民共和国住房和城乡建设部公告

4-40-00
2019年 第311号
住房和城乡建设部关于发布国家标准《建筑结构检测技术标准》的公告
现批准《建筑结构检测技术标准》为国家标准,编号为GB/T 50344-2019,自2020年6月1日起实施。原《建筑结构检测技术标准》GB/T 50344-2004同时废止。
本标准在住房和城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房和城乡建设部标准定额研究所组织中国建筑出版传媒有限公司出版发行。
中华人民共和国住房和城乡建设部
2019年11月22日

本书术语

术语 英文名称
建筑结构检测 inspection of building structure
检测批 inspection lot
抽样检测 sampling inspection
测区 testing zone
测点 testing point
非破损检测方法 method of non-destructive test
局部破损检测方法 method of part-destructive test
回弹法 rebound method
超声回弹综合法 ultrasonic-rebound combined method
钻芯法 drilled core method

首页 |关于我们 |联系我们 |帮助中心

主办:中国计划出版社 版权所有 侵权必究 合作共建单位:中国工程建设标准化协会 京ICP备05021380号-5
新建收藏夹

选择收藏夹

收藏夹名称