首页 >标准规范

城镇桥梁沥青混凝土桥面铺装施工技术标准

Technical standard for construction of paving asphalt concrete urban bridge deck

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【批准部门】

    中华人民共和国住房和城乡建设部

  • 【发布单位】

    中华人民共和国住房和城乡建设部

  • 【主编单位】

    武汉市市政建设集团有限公司;浙江湖州市建工集团有限公司

  • 【参编单位】

    武汉理工大学;东南大学;重庆市智翔铺道技术工程有限公司;武汉市市政工程质量监督站;武汉市政工程设计研究院有限责任公司;武汉市市政路桥有限公司;中国建筑科学研究院;沈阳市政集团有限公司;上海公路桥梁(;集团)有限公司;湖北工业大学;武汉新途工程新材料科技有限公司;华煜建设集团有限公司;宁波宁大工程建设监理有限公司;上海市市政工程管理咨询有限公司

  • 【主要起草人】

    邓利明;肖铭钊;茅建坤;王杰中;丁庆军;钱振东;郝增恒;王民;李景成朱明安;周俊;胡曙光;张守城;张勇;牟廷敏;沈凡;方四发;卢吉;张磊;刘春发;孙大庆;乐海淳;朱天同;胡春华;范瑛;马堂英;曹友樑;沈曦;张健智;袁鹏;高少勇;刘永健;黄绍龙;李扬;程华强;苗强;孙聪;王晴;管小军;赵明宇

  • 【主要审查人】

    吴国雄;柳浩;张厚记;温学钧;徐利军;杨东来;吴万平;吴春颖;范碧琨

收起

中文目录

  • 中华人民共和国住房和城乡建设部公告

  • 前  言

  • 1 总  则

  • 2 术语和代号

    • 2.1 术  语

    • 2.2 代  号

  • 3 桥面铺装结构组合

    • 3.1 一般规定

    • 3.2 桥面典型铺装结构

    • 3.3 特殊部位典型铺装结构

  • 4 材  料

    • 4.1 一般规定

    • 4.2 沥青胶结料

    • 4.3 集  料

    • 4.4 填料和纤维

    • 4.5 功能调联层原材料

    • 4.6 界面功能层材料

  • 5 桥面板预处理

    • 5.1 一般规定

    • 5.2 混凝土桥面板预处理

    • 5.3 钢桥面板预处理

  • 6 环氧沥青混凝土铺装

    • 6.1 一般规定

    • 6.2 环氧沥青混合料级配及性能要求

    • 6.3 防水粘结层施工

    • 6.4 粘层施工

    • 6.5 环氧沥青混合料施工

  • 7 浇注式沥青混凝土铺装

    • 7.1 一般规定

    • 7.2 浇注式沥青混合料级配及性能要求

    • 7.3 防水粘结层施工

    • 7.4 改性沥青胶砂缓冲层施工

    • 7.5 粘层施工

    • 7.6 浇注式沥青混合料施工

  • 8 功能调联层与高黏高弹改性沥青SMA组合铺装

    • 8.1 一般规定

    • 8.2 剪力钉与钢筋网安装

    • 8.3 高韧性轻集料混凝土和纤维混凝土配合比设计

    • 8.4 高韧性轻集料混凝土和纤维混凝土施工

    • 8.5 高黏高弹改性沥青SMA配合比设计及性能要求

    • 8.6 防水粘结应力吸收层的施工

    • 8.7 高黏高弹改性沥青SMA施工

  • 9 其他沥青混凝土桥面铺装

    • 9.1 一般规定

    • 9.2 沥青混凝土配合比设计

    • 9.3 防水粘结层、防水粘结应力吸收层和粘层施工

    • 9.4 其他沥青混凝土施工

  • 10 质量检验与验收

    • 10.1 一般规定

    • 10.2 材料检验

    • 10.3 质量验收

  • 附录A 桥面铺装粘结强度试验方法

  • 附录B 浇注式沥青混合料刘埃尔流动性试验方法

  • 附录C 环氧沥青混合料配合比设计方法

  • 附录D 浇注式沥青混合料配合比设计方法

  • 附录E 浇注式沥青混合料贯入度试验方法

  • 附录F 高韧性轻集料混凝土配合比设计方法

  • 本标准用词说明

  • 引用标准名录

收起

英文目录

  • 1 General Provisions

  • 2 Terms and Symbols

    • 2.1 Terms

    • 2.2 Symbols

  • 3 Bridge Pavement Structure Combination

    • 3.1 General Requirements

    • 3.2 Typical Bridge Pavement Structure

    • 3.3 Typical Pavement Structure for Special Site

  • 4 Materials

    • 4.1 General equirements

    • 4.2 Asphalt Binder

    • 4.3 Aggregate

    • 4.4 Padding and Fiber

    • 4.5 Function Adjust-Linking Materials

    • 4.6 Interface Function Layer Material

  • 5 Pretreatment for Bridge Deck Slab

    • 5.1 General Requirements

    • 5.2 Pretreatment for Concrete Bridge Deck Slab

    • 5.3 Pretreatment for Steel Bridge Deck Slab

  • 6 Epoxy Asphalt Concrete Paving

    • 6.1 General Requirements

    • 6.2 Grading and Performance Requirements for Epoxy Asphalt Mixture

    • 6.3 Waterproof-bonding Layer Construction

    • 6.4 Tack Coat Construction

    • 6.5 Epoxy Asphalt Mixture Construction

  • 7 Gussasphalt Paving

    • 7.1 General Requirements

    • 7.2 Grading and Performance Requirements for Gussasphalt

    • 7.3 Waterproof-bonding Layer Construction

    • 7.4 Modified Asphalt Mastic cushioning Layer Construction

    • 7.5 Tack Coat Construction

    • 7.6 Gussasphalt Construction

  • 8 Combined Pavement for Function Adjust-linking and High Viscosity and High Elastic Modified Asphalt SMA

    • 8.1 General Requirements

    • 8.2 Shear Stud and reinforcing Mesh Installation

    • 8.3 Mix Design of High tenacity Lightweight Aggregate Concrete and Fiber Concrete

    • 8.4 High Tenacity Lightweight Aggregate Concrete and Fiber Concrete Construction

    • 8.5 Mix Design and Performance Requirements for High Viscosity and High Elastic Modified Asphalt SMA

    • 8.6 Waterproof-Bond and Stress Absorbing Layer Construction

    • 8.7 High Viscosity and High Elastic Modified Asphalt Construction

  • 9 Other Asphalt Concrete Bridge Paving

    • 9.1 General Requirements

    • 9.2 Mix Proportion Design of Asphalt Concrete

    • 9.3 Construction for Waterproof-bonding Layer.Waterproofbonding and Stress Absorbing Layer and Tack Coat

    • 9.4 Other Asphalt Concrete Construction

  • 10 Quality Inspection and Acceptance

    • 10.1 General Requirements

    • 10.2 Material Inspection

    • 10.3 Quality Acceptance

  • Appendix A Test Method for Bridge Paving Bonding Strength

  • Appendix B Mobility Test Method for Gussasphalt

  • Appendix C Mix Proportion Design for Epoxy Asphalt Mixture

  • Appendix D Mix Proportion Design for Gussasphalt

  • Appendix E Penetration Test Method for Gussasphalt

  • Appendix F Mix Design Method for High tenacity Lightweight Aggregate Concrete

  • Explanation of Wording in ThisStandard

  • List of Quoted Standards

收起

公告

中华人民共和国住房和城乡建设部公告

4-40-00
2018第50号
住房城乡建设部关于发布行业标准《城镇桥梁沥青混凝土桥面铺装施工技术标准》的公告
现批准《城镇桥梁沥青混凝土桥面铺装施工技术标准》为行业标准,编号为CJJ/T 279-2018,自2018年10月1日起实施。
本标准在住房城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房城乡建设部标准定额研究所组织中国建筑工业出版社出版发行。
中华人民共和国住房和城乡建设部
2018年4月10日
收起

本书术语

术语 英文名称 术语 英文名称
界面功能层 interface functional layer 防腐层 anti-corrosion coating
防水粘结层 waterproof-bonding layer 缓冲层 cushioning layer
防水粘结应力吸收层 waterproof-bond and stress absorbing layer 改性沥青胶砂 modified asphalt mastic
浇注式沥青混合料 gussasphalt 环氧沥青混合料 epoxy asphalt mixtures
容留时间 reserved time range 高韧性轻集料混凝土 high tenacity lightweight aggrega te concrete

确定

功能项目 注册用户 普通会员 高级会员/企业版
计划版标准阅读 仅限国标条文 库内全部标准 库内全部标准
标准关联查询
强制性条文聚合
标准资源对比
术语查询
知识库管理
服务资讯查看
原版标准阅读
条文说明阅读
标准文字复制(200字/次) 100次/月 不限
标准追踪
行业定制
实用表格下载(仅PC端)
电子书与视频
专家解读视频 免费视频 免费视频 全部视频