首页 >标准规范

燃气-蒸汽联合循环电厂设计规范

Code for design of combined-cycle power plant

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【主编部门】
    电力规划设计总院
  • 【批准部门】

    国家能源局

  • 【发布单位】

    国家能源局

  • 【主编单位】

    中国电力工程顾问集团华东电力设计院有限公司

  • 【参编单位】

    中国电力工程顾问集团西南电力设计院有限公司;中国电力工程顾问集团华北电力设计院有限公司;中国电建集团福建省电力勘测设计院有限公司

  • 【主要起草人】

    朱志明;陈旭明;倪超;王红岩;许振宇;付焕兴;范勇刚;段丽平;余琳;汪元姣;魏鹏冲;王华;杭莉莉;郑培钢;廖内平;王振宇;徐飙;诸白蒙;徐钧;曹丽红;庄发成

  • 【主要审查人】

    赵敏;贾成;李文凯;任德刚;姜梅;王宁;陈实;唐燕萍;杨建祥;李慢忆;王向东;花立存;黄佑验;刘利;唐海锋;汪少勇;丁雁湘;戴宏进;梁文军

收起

中文目录

  • 国家能源局公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

  • 4 厂址选择

  • 5 总体规划及总平面布置

    • 5.1 总体规划

    • 5.2 总平面布置

  • 6 机组选型

    • 6.1 主机选型

    • 6.2 工况定义

    • 6.3 机组参数选择及匹配

    • 6.4 机组设计性能指标计算

  • 7 主厂房区域布置

    • 7.1 一般规定

    • 7.2 燃气轮机及其辅助设备布置

    • 7.3 余热锅炉及其辅助设备布置

    • 7.4 汽轮机布置

    • 7.5 控制室布置

    • 7.6 维护检修

  • 8 燃料供应设备及系统

    • 8.1 燃油系统及设备

    • 8.2 天然气系统及设备

    • 8.3 中低热值合成气系统及设备

  • 9 燃气轮机设备及系统

  • 10 余热锅炉及系统

    • 10.1 余热锅炉设备

    • 10.2 烟气系统

    • 10.3 给水系统

    • 10.4 排污、排汽和疏水系统

    • 10.5 烟气脱硝系统

  • 11 汽轮机设备及系统

  • 12 水处理系统

    • 12.1 除盐水制备

    • 12.2 凝结水精处理

    • 12.3 热力系统的化学加药和水汽取样

    • 12.4 冷却水处理

    • 12.5 热网补给水及生产回水处理

    • 12.6 废水处理

  • 13 仪表与控制

    • 13.1 一般规定

    • 13.2 自动化水平

    • 13.3 控制方式及控制室

    • 13.4 检测与仪表

    • 13.5 机组保护

    • 13.6 开关量控制及联锁

    • 13.7 模拟量控制

    • 13.8 报  警

    • 13.9 控制系统

    • 13.10 仪表导管、电缆及就地设备布置

  • 14 电气设备及系统

    • 14.1 发电机与主变压器

    • 14.2 电气主接线

    • 14.3 厂用电系统

    • 14.4 燃气轮机启动电源

    • 14.5 直流及交流不间断电源系统

    • 14.6 电气监控及元件继电保护

    • 14.7 电缆选择与敷设

    • 14.8 其他电气设施

  • 15 水工设施及系统

    • 15.1 水源和水务管理

    • 15.2 湿冷系统和空冷系统

    • 15.3 取水构筑物和水泵房

    • 15.4 管道和沟渠

    • 15.5 冷却设施

  • 16 辅助及附属设施

  • 17 建筑与结构

    • 17.1 一般规定

    • 17.2 建筑设计

    • 17.3 结构设计

    • 17.4 构筑物设计

    • 17.5 水工建(构)筑物设计

  • 18 供暖、通风和空气调节

    • 18.1 一般规定

    • 18.2 燃气轮机厂房、汽机房和余热锅炉房

    • 18.3 燃油系统、燃气系统各建筑物

  • 19 环境保护与水土保持

    • 19.1 一般规定

    • 19.2 大气污染防治

    • 19.3 废水处理

    • 19.4 噪声防治

    • 19.5 环境保护监测及管理

    • 19.6 水土保持

  • 20 消防、职业安全与职业卫生

  • 附录A 机组设计性能指标的计算方法

  • 本标准用词说明

  • 引用标准名录

收起

英文目录

  • 1 General provisons

  • 2 Terms

  • 3 Basic requirements

  • 4 Selection of plant site

  • 5 Overall planning and general layout

    • 5.1 Overall planning

    • 5.2 General layout

  • 6 Unit configuration

    • 6.1 Main machine selection

    • 6.2 Condition definition

    • 6.3 Unit parameter selection and matching

    • 6.4 Unit performance calculation

  • 7 Main building arrangement

    • 7.1 General requirements

    • 7.2 Gas turbine and auxiliary equipments arrangement

    • 7.3 HRSG and auxiliary equipments arrangement

    • 7.4 Steam turbine arrangement

    • 7.5 Control room arrangement

    • 7.6 Maintenance and repair facilities

  • 8 Equipment and system of fuel oil forwarding

    • 8.1 Fuel oil system and equipment

    • 8.2 Natural gas system and equipment

    • 8.3 Low calorific value synthetic gas system and equipment

  • 9 Gas turbine equipment and system

  • 10 HRSG equipment and system

    • 10.1 HRSG equipment

    • 10.2 Fuel gas system

    • 10.3 Feedwater system

    • 10.4 Blowdown exhaust and drain system

    • 10.5 Flue gas denitration system

  • 11 Steam turbine equipment and system

  • 12 Water treatment system

    • 12.1 Demineralized water treatment

    • 12.2 Condensate polishing for steam turbine

    • 12.3 Chemical dosing and water-steam sampling for thermal system

    • 12.4 Cooling water treatment

    • 12.5 Heating network makeup water and industrial return water treatment

    • 12.6 Waste water treatment

  • 13 Instrumentation and control

    • 13.1 General requirements

    • 13.2 Thermal automation level

    • 13.3 Control mode and control room

    • 13.4 Thermal measurement

    • 13.5 Thermal protection

    • 13.6 Thermal on-off control and interlock

    • 13.7 Thermal modulating control

    • 13.8 Thermal alarming

    • 13.9 Control system

    • 13.10 Instrument tube,cable and arrangement of local equipment

  • 14 Electrical equipment and system

    • 14.1 Generator and main transformer

    • 14.2 Main electrical connection

    • 14.3 AC auxiliary power system

    • 14.4 Gas turbine startup power source

    • 14.5 DC system and AC uninterruptible power supply

    • 14.6 Electrical monitoring and control and relay protection

    • 14.7 Cable selection and cable routing

    • 14.8 Other electrical facilities

  • 15 Hydraulic facilities and systems

    • 15.1 Water source and water management

    • 15.2 Wet cooling system and air cooling system

    • 15.3 Water intake struction and pump house

    • 15.4 Piping and culvert

    • 15.5 Cooling facilities

  • 16 Auxiliary and ancillary facilities

  • 17 Buildings and structures

    • 17.1 General requirements

    • 17.2 Architectural design

    • 17.3 Structure design

    • 17.4 Special structure design

    • 17.5 Hydraulic structure design

  • 18 Heating,ventilation and air conditioning

    • 18.1 General requirements

    • 18.2 Gas turbine building,steam turbine building and HRSG building

    • 18.3 Fuel oil and fuel gas system building

  • 19 Environmental protection and water and soil conservation

    • 19.1 General requirements

    • 19.2 Prevention and control of atmospheric pollution

    • 19.3 Waste water discharge treatment

    • 19.4 Noise prevention and control

    • 19.5 Environmental protection monitoring and management

    • 19.6 Water and soil conservation

  • 20 Fire fighting and occupational safety and health

  • Appendix A Calculation method for unit performance

  • Explanation of wording in this standard

  • List of quoted standards

收起

公告

国家能源局公告

4-40-01
2020年 第5号
国家能源局批准《水电工程生态流量实时监测系统技术规范》等502项能源行业标准(附件1)、《Series Parameters for Horizontal Hydraulic Hoist(Cylinder)》等35项能源行业标准英文版(附件2),现予以发布。
附件:1.行业标准目录
   2.行业标准英文版目录
国家能源局
2020年10月23日
附件1:
行业标准目录
收起

本书术语

术语 英文名称 术语 英文名称
燃机电厂 gas turbine power plant 调压站 regulator station
一拖一 one plus one 多拖一 multi units plus one
中低热值合成气 medium and low heat value syngas

确定