首页 >标准规范

煤矿设备安装工程质量验收规范

Code for acceptance of construction quality of coal mine equipment installation

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【主编部门】
    中国煤炭建设协会
  • 【批准部门】

    中华人民共和国住房和城乡建设部

  • 【发布单位】

    中华人民共和国住房和城乡建设部;中华人民共和国国家质量监督检验检疫总局

  • 【主编单位】

    平煤神马建工集团有限公司

  • 【参编单位】

    中煤矿山建设集团有限公司;中煤第一建设公司;中煤第五建设公司;煤炭工业郑州设计院有限公司;中煤国际工程集团武汉设计研究院;中国矿业大学;河北工程大学

  • 【主要起草人】

    张昌顺;赵春孝;高万山;仝洪昌;李勤山;涂心彦;张永忠;邬象牟;崔家春;岳广义;袁保安;朱惠生;曲德臣;郭仕印;徐继民;陈志刚;董晓钧;押朝伍;李灿欣;陈平刚;毛道伟;李瑛;侯红琦;李理化;王敏建;何志清;刘自鑫;鲁海涛;韩世军;郑红旗;吴炳胜;罗丽宾;杨志辉;李坤;曹松国

  • 【主要审查人】

    张胜利;黄家贫;齐彧;孙守仁;王民中;张百祥;王鹏越;安明富;迟桂林;崔晓林;冯 荣;张可英;陈 付;孙荣光;刘培年

收起

中文目录

  • 中华人民共和国住房和城乡建设部公告第241号

  • 前  言

  • 1 总  则

  • 2 基本规定

  • 3 设备基础、基础螺栓、垫铁及二次灌浆

    • 3.1 一般规定

    • 3.2 设备基础

    • 3.3 基础螺栓

    • 3.4 垫铁及二次灌浆

  • 4 设备和材料进场

    • 4.1 一般规定

    • 4.2 设备及材料进场

  • 5 多绳摩擦式提升机安装工程

    • 5.1 主轴装置安装

    • 5.2 减速器安装

    • 5.3 盘式制动器安装

    • 5.4 液压站及润滑油站安装

    • 5.5 电动机通风冷却设备安装

    • 5.6 辅助装置安装

    • 5.7 试 运 转

  • 6 缠绕式提升机及矿用提升绞车安装工程

    • 6.1 主轴装置安装

    • 6.2 滚筒组装

    • 6.3 传动系统安装

    • 6.4 制动系统安装

    • 6.5 液压站及润滑油站安装

    • 6.6 辅助装置安装

    • 6.7 试 运 转

  • 7 立井井筒装备安装工程

    • 7.1 井筒装备构件制作及防腐蚀

    • 7.2 树脂锚杆固定托架及梁的安装

    • 7.3 罐道梁安装

    • 7.4 罐道安装

    • 7.5 液压伸缩罐道安装

    • 7.6 钢丝绳罐道及防撞绳安装

    • 7.7 井上下联结部分罐道梁及四角罐道安装

    • 7.8 楔形罐道梁及楔形罐道安装

    • 7.9 井上下防撞梁安装

    • 7.10 管子梁、管座梁安装

    • 7.11 尾绳保护装置安装

    • 7.12 梯子间安装

    • 7.13 电缆支架安装

  • 8 钢结构井架安装工程

    • 8.1 一般规定

    • 8.2 井架制作

    • 8.3 铆接和焊接

    • 8.4 井架组装

    • 8.5 井架安装

    • 8.6 井架防腐蚀

    • 8.7 天轮及游动天轮安装

    • 8.8 试 运 转

  • 9 装载、卸载及撒煤清理设备安装工程

    • 9.1 井底装载设备安装

    • 9.2 井口卸载曲轨及受煤仓接煤设施安装

    • 9.3 撒煤篦子安装

    • 9.4 块煤滑落通道安装

    • 9.5 金属煤仓式清理设备安装

    • 9.6 扒斗式清理设备安装

  • 10 井上下操车设备安装工程

    • 10.1 罐座安装

    • 10.2 摇台及缓冲托罐装置安装

    • 10.3 井上下平台安装

    • 10.4 井上下安全门安装

    • 10.5 阻车器安装

    • 10.6 链式推车机安装

    • 10.7 销齿式推车机安装

    • 10.8 爬车机安装

  • 11 提升设施安装工程

    • 11.1 提升绳及悬挂装置安装

    • 11.2 平衡绳及悬挂装置安装

    • 11.3 导向装置安装

    • 11.4 罐笼本体结构和阻车器安装

    • 11.5 平衡锤安装

    • 11.6 立井(斜井)提煤箕斗本体结构安装

    • 11.7 立井罐笼制动绳式防坠器提升架安装

    • 11.8 立井罐笼制动绳式防坠器缓冲器安装

    • 11.9 立井罐笼制动绳式防坠器捕绳器安装

    • 11.10 立井罐笼制动绳式防坠器制动绳拉紧装置安装

    • 11.11 立井罐笼木罐道刺入式防坠器安装

    • 11.12 防过卷和防过放装置安装

    • 11.13 立井罐笼防坠器试验

    • 11.14 试 运 转

  • 12 矿井输送设备安装工程

    • 12.1 胶带输送机安装

    • 12.2 钢丝绳牵引胶带输送机安装

    • 12.3 刮板输送机安装

    • 12.4 转载机安装

    • 12.5 斗式提升机安装

    • 12.6 窄轨电机车安装

    • 12.7 斜井人车安装

    • 12.8 梭车无极绳运输设备安装

    • 12.9 卡轨车安装

    • 12.10 齿轨车安装

    • 12.11 单轨吊安装

    • 12.12 跑车防护装置安装

  • 13 架空乘人装置安装工程

    • 13.1 一般规定

    • 13.2 驱动装置安装

    • 13.3 横梁制作及安装

    • 13.4 托绳轮及压绳轮安装

    • 13.5 牵引钢丝绳展开和连接

    • 13.6 迂回轮安装

    • 13.7 拉紧装置安装

    • 13.8 乘人装置的组装及安装

    • 13.9 试 运 转

  • 14 矿井通风系统设备安装工程

    • 14.1 垫铁、基础螺栓及二次灌浆

    • 14.2 轨道安装

    • 14.3 离心式通风机安装

    • 14.4 轴流式通风机安装

    • 14.5 测压设备安装

    • 14.6 反风装置安装

    • 14.7 防爆门及附件安装

    • 14.8 消声器安装

    • 14.9 试 运 转

  • 15 矿井压风系统安装工程

    • 15.1 一般规定

    • 15.2 机体安装

    • 15.3 附属设备安装

    • 15.4 试 运 转

  • 16 矿井排水系统安装工程

    • 16.1 一般规定

    • 16.2 离心泵安装

    • 16.3 射流装置安装

    • 16.4 配水设备安装

    • 16.5 室内管路及附件安装

    • 16.6 潜水电泵安装

    • 16.7 试 运 转

  • 17 矿井水处理设备安装工程

    • 17.1 一般规定

    • 17.2 斜管沉淀池设备安装

    • 17.3 水力循环澄清池设备安装

    • 17.4 机械搅拌澄清池设备安装

    • 17.5 无阀滤池设备安装

    • 17.6 机械过滤器设备安装

    • 17.7 加药消毒箱槽安装

    • 17.8 加药装置安装

    • 17.9 消毒装置安装

    • 17.10 脱盐深度处理设备安装

    • 17.11 格栅除污机安装

    • 17.12 除砂设备安装

    • 17.13 搅拌推流装置安装

    • 17.14 一体化污水处理设备安装

    • 17.15 水处理用水泵安装

    • 17.16 压风、鼓风设备安装

    • 17.17 曝气器设备安装

    • 17.18 污泥处置设备安装

    • 17.19 水处理厂工艺管线安装

    • 17.20 水处理其他设备、装置安装

  • 18 矿井工业管道安装工程

    • 18.1 一般规定

    • 18.2 管道组成件及管道支承件的检验

    • 18.3 管道加工

    • 18.4 管道焊接

    • 18.5 矿井工业管道安装

    • 18.6 管道系统试验及涂漆

  • 19 瓦斯抽放设备安装工程

    • 19.1 一般规定

    • 19.2 瓦斯抽放泵安装

    • 19.3 移动式瓦斯抽放泵站安装

    • 19.4 瓦斯抽放泵站附件安装

    • 19.5 室内管道安装

    • 19.6 试 运 转

  • 20 井下采掘设备安装工程

    • 20.1 液压支架安装

    • 20.2 采煤机安装

    • 20.3 刨煤机安装

    • 20.4 装岩机安装

    • 20.5 掘进机安装

    • 20.6 单(双)体液压支柱

    • 20.7 乳化液泵站

  • 21 矿井其他机械设备安装工程

    • 21.1 矿用绞车安装

    • 21.2 翻车机安装

    • 21.3 排矸设备安装

    • 21.4 卸载站安装

    • 21.5 矿井注氮站及辅助设备安装

    • 21.6 液压注浆泵安装

    • 21.7 泥浆泵安装

    • 21.8 深井泵安装

    • 21.9 闸门和溜槽安装

    • 21.10 整体泵站安装

    • 21.11 往复(甲带)式给煤机安装

    • 21.12 电磁铁振动给煤机安装

    • 21.13 带式给料(煤)机安装

  • 22 旋转电机安装工程

    • 22.1 一般规定

    • 22.2 电机安装

    • 22.3 特殊电机安装

  • 23 井下空气调节系统设备安装工程

    • 23.1 空气加热室设备安装

    • 23.2 热风炉安装

    • 23.3 矿井制冷站设备安装

  • 24 堆取料机设备安装工程

    • 24.1 一般规定

    • 24.2 轨道安装

    • 24.3 行走部件及机架安装

    • 24.4 传动部件及液压气路系统安装

    • 24.5 活动轮及斗轮机构安装

    • 24.6 开起机构及尾车安装

    • 24.7 试 运 转

  • 25 计量设备安装工程

    • 25.1 汽车衡安装

    • 25.2 轨道衡安装

    • 25.3 电子皮带秤安装

    • 25.4 非接触式计量装置———核秤安装

  • 附录A 煤矿设备安装工程分项、分部及单位工程名称

  • 附录B 煤矿设备安装工程质量验收记录表

  • 本规范用词说明

  • 引用标准名录

收起

英文目录

  • 1 General provisions

  • 2 Basic requirement

  • 3 Equipment foundation,foundation bolt,iron pad and secondary grouting

    • 3.1 General requirement

    • 3.2 Equipment foundation

    • 3.3 Foundation bolt

    • 3.4 Iron pad and secondary grouting

  • 4 Equipment and materials approaching

    • 4.1 General requirement

    • 4.2 Equipment and materials approaching

  • 5 Multi-rope friction hoist installation engineering

    • 5.1 Spindle device installation

    • 5.2 Reducer installation

    • 5.3 Disc brake installation

    • 5.4 Hydraulic station and lubricating oil station installation

    • 5.5 Motor ventilation cooling equipment installation

    • 5.6 Auxiliary device installation

    • 5.7 Test run

  • 6 Winding hoist and mine hoist installation engineering

    • 6.1 Spindle device installation

    • 6.2 Roller assembly

    • 6.3 Transmission system installation

    • 6.4 Brake system installation

    • 6.5 Hydraulic station and lubricating oil station installation

    • 6.6 Auxiliary device installation

    • 6.7 Test run

  • 7 Mainshaft equipment installation engineering

    • 7.1 Production of shaft equipment fabrication and corrosion

    • 7.2 Resin bolt fixing bracket and beam installation

    • 7.3 Tank path beam installation

    • 7.4 Tank installation

    • 7.5 Hydraulic telescopic tank installation

    • 7.6 Wire rope guide and anticollision rope installation

    • 7.7 Well on the connection part of bunton and four angles of tank installation

    • 7.8 Wedge guide beam and wedge guide installation

    • 7.9 Anticollision beam installation

    • 7.10 Guan Ziliang,base beam installation

    • 7.11 Tail rope protection device installation

    • 7.12 Ladder hall installation

    • 7.13 Cable bracket installation

  • 8 Steel structure derrick installation engineering

    • 8.1 General requirement

    • 8.2 Derrick fubrication

    • 8.3 Riveting and welding

    • 8.4 Mast assembly

    • 8.5 Derrick installation

    • 8.6 Derrick corrosion protection

    • 8.7 Sheave and traveting sheave intallation

    • 8.8 Test run

  • 9 Loading,unloading and scattered coal cleaning equipment installation engineering

    • 9.1 Bottom loading equipment installation

    • 9.2 Wellhead dump rail and coal feeding bunker coal receivinginstallation

    • 9.3 Coal grate installation

    • 9.4 Coal sliding channel installation

    • 9.5 Metal bunker type cleaning equipment installation

    • 9.6 Scraper type cleaning equipment installation

  • 10 Wells have drills vehicle equipment installation engineering

    • 10.1 Tank seat installation

    • 10.2 Cradle and buffer support device installation

    • 10.3 Well on the platform installation

    • 10.4 Well the safety door installation

    • 10.5 Car arrester installation

    • 10.6 Chain trolley machine installation

    • 10.7 Pin gear puller installation

    • 10.8 Creeper installation

  • 11 Lifting facilities installation engineering

    • 11.1 Lifting rope and hanging device installation

    • 11.2 The balance rope and hanging device installation

    • 11.3 Guide device installation

    • 11.4 Cage body structure and car arrester installation

    • 11.5 Balance weight installation

    • 11.6 Shaft(inclined)coal bucket body structure installation

    • 11.7 Shaft cage brake rope parachute gear lifting frame installation

    • 11.8 Shaft cage brake rope parachute gear buffer installation

    • 11.9 Shaft cage brake rope parachute gear rope catching device installation

    • 11.10 Parachute brake rope tensioning device shaft cage rope brake installation

    • 11.11 Shaft cage wooden tank stab type anti-falling device installation

    • 11.12 Prevent overwind and overfall device installation

    • 11.13 Shaft cage anti-falling device test

    • 11.14 Test run

  • 12 Mine conveying equipment installation engineering

    • 12.1 Belt conveyor installation

    • 12.2 Steel wire rope traction belt conveyor installation

    • 12.3 Scraper conveyor installation

    • 12.4 Reprint machine installation

    • 12.5 Bucket elevator installation

    • 12.6 Narrow gauge locomotive installation

    • 12.7 Inclined shaft man car installation

    • 12.8 Shuttle car endless rope haulage equipment installation

    • 12.9 Rail car installation

    • 12.10 Tooth rail car installation

    • 12.11 Monorail crane installation

    • 12.12 Car protective device

  • 13 Overhead manned equipment installation engineering

    • 13.1 General requirement

    • 13.2 Drive device installation

    • 13.3 Beam manufacture and installation

    • 13.4 Installation of the rope supporting wheel and the rope pressing wheel

    • 13.5 Expansion and connetion of wire rope traction

    • 13.6 The return wheel mounting

    • 13.7 Tensioning device installation

    • 13.8 Passenger device assembly and installation

    • 13.9 Test run

  • 14 Mine ventilation system equipment installation engineering

    • 14.1 Pad iron,foundation bolt and secondary grouting

    • 14.2 Track installation

    • 14.3 Centrifugal fan installation

    • 14.4 Axial flow fan installation

    • 14.5 Pressure measuring equipment installation

    • 14.6 Air device installation

    • 14.7 Explosion-proof doors and accessories installation

    • 14.8 Muffler installation

    • 14.9 Test run

  • 15 Mine ventilation system installation engineering

    • 15.1 General requirement

    • 15.2 Body mounting

    • 15.3 Affiliated equipment installation

    • 15.4 Test run

  • 16 Mine drainage system installation engineering

    • 16.1 General requirement

    • 16.2 Centrifugal pump installation

    • 16.3 Jet device installation

    • 16.4 Water distribution equipment installation

    • 16.5 Indoor installation of piping and accessories

    • 16.6 Submersible pump installation

    • 16.7 Test run

  • 17 Mine water treatment equipment installation engineering

    • 17.1 General requirement

    • 17.2 Inclined tube sedimentation tank equipment installation

    • 17.3 Hydraulic circulating clarifying pool equipment installation

    • 17.4 Mechanical stirring clarifying pool equipment installation

    • 17.5 No valve filter equipment installation

    • 17.6 Mechanical filter equipment installation

    • 17.7 Dosing disinfection tank installation

    • 17.8 Dosing device installation

    • 17.9 Disinfection device installation

    • 17.10 The desalting depth treatment equipment installation

    • 17.11 Grille decontamination machine installation

    • 17.12 Removing sand equipment installation

    • 17.13 Mixing flow pushing device installation

    • 17.14 Integration equipment installation

    • 17.15 Water pump installation

    • 17.16 Pressure wind,blowing equipment installation

    • 17.17 Aeration equipment installation

    • 17.18 Sludge treatment equipment installation

    • 17.19 Water treatment plant process piping installation

    • 17.20 Water treatment equipment,equipment installation

  • 18 Mine industrial piping installation

    • 18.1 General requirement

    • 18.2 Constituent elements of pipeline and pipe support inspection

    • 18.3 Pipe processing

    • 18.4 Pipeline welding

    • 18.5 Mine industrial piping installation

    • 18.6 Test of piping system and painting

  • 19 Gas drainage equipment installation engineering

    • 19.1 General requirement

    • 19.2 Gas drainage pump installation

    • 19.3 Mobile gas drainage pumping station installation

    • 19.4 Gas drainage pumping station accessories installed

    • 19.5 Indoor plumbing installation

    • 19.6 Test run

  • 20 Underground mining equipment installation engineering

    • 20.1 Hydraulic bracket installation

    • 20.2 Coal mining machine installation

    • 20.3 Plough installation

    • 20.4 Rock loading machine installation

    • 20.5 Tunneling machine installation

    • 20.6 Single(double)hydraulic prop

    • 20.7 Emulsion pump station

  • 21 Mine other mechanical equipment installation engineering

    • 21.1 Mine hoist installation

    • 21.2 Car dumper installation

    • 21.3 Gangue equipments installation

    • 21.4 Unloading station installation

    • 21.5 Mine nitrogen injection station and auxiliary equipment installation

    • 21.6 Hydraulic grouting pump installation

    • 21.7 Mud pump installation

    • 21.8 Deep well pump installation

    • 21.9 Gate and chute installation

    • 21.10 The whole station installation

    • 21.11 Reciprocating(belt)type coal feeder installation

    • 21.12 Electromagnet vibration coal feeder installation

    • 21.13 Belt feeder(coal)installation

  • 22 Rotating motor installation engineering

    • 22.1 General requirement

    • 22.2 Motor installation

    • 22.3 Special motor installation

  • 23 Underground air conditioning system equipment installation engineering

    • 23.1 Air heating room equipment installation

    • 23.2 Hot air furnace installation

    • 23.3 Mine refrigeration station equipment installation

  • 24 Stacker reclaimer equipment installation engineering

    • 24.1 General requirement

    • 24.2 Track installation

    • 24.3 Moving parts and rack mounting

    • 24.4 Transmission parts and hydraulic pneumatic system installation

    • 24.5 Wheel and bucket wheel mechanism installation

    • 24.6 Open mechanism and tail car installation

    • 24.7 Test operation

  • 25 Metering equipment installation engineering

    • 25.1 Truck scale installation

    • 25.2 Track scale installation

    • 25.3 Electronic belt scale installation

    • 25.4 Non-contact measuring device—called nuclear installation

  • Appendix A:Coal mine equipment installation engineering item name,branch and unit project

  • Appendix B:Coal mine equipment installation quality acceptance record in table

  • Explanation of wording in this code

  • List of quoted standards

收起

公告

中华人民共和国住房和城乡建设部公告第241号

住房城乡建设部关于发布国家标准《煤矿设备安装工程质量验收规范》的公告
4-40-00
现批准《煤矿设备安装工程质量验收规范》为国家标准,编号为GB 50946—2013,自2014年6月1日起实施。其中,第2.0.82.0.915.2.917.9.119.4.120.5.323.3.625.4.2条为强制性条文,必须严格执行。
本规范由我部标准定额研究所组织中国计划出版社出版发行。
中华人民共和国住房和城乡建设部
2013年11月29日
收起

本书术语

术语 英文名称 术语 英文名称

确定