首页 >标准规范

超高性能混凝土试验方法标准

Standard for test method of ultra-high performance concrete

会员免费阅读,去 购买

  • 标准信息
  • 中文目录
  • 英文目录
  • 公告
收起

标准信息

  • 【主编部门】
    上海市建筑科学研究院有限公司;广州市玖珂瑭材料科技有限公司
  • 【批准部门】

    中国工程建设标准化协会

  • 【发布单位】

    中国工程建设标准化协会

  • 【主编单位】

    上海市建筑科学研究院有限公司;广州市玖珂瑭材料科技有限公司

  • 【参编单位】

    同济大学;福州大学;湖南大学;拉法基豪瑞建材(中国)有限公司;上海建研建材科技有限公司;上海城建市政工程(集团)有限公司;广东盖特奇新材料科技有限公司;上海环宇建筑工程材料有限公司;上海城建物资有限公司;华新新型建材(武汉)有限公司;上海复培新材料技术有限公司;浙江宏日泰耐克新材料科技有限公司;福建瑞森新材料股份有限公司

  • 【主要起草人】

    於林锋;王俊颜;樊俊江;韩建军;柯雄;王琼;黄伟;姚利君;李华良;王边;周南南;王洪新;刘福财;李欢欢;李飞;闵轶;商得辰;刘健;商涛平;单波;陆志军;孙丹丹;沈贵阳;史若昕

  • 【主要审查人】

    阎培渝;黄政宇;顾泰昌;孙振平;吴香国;焦楚杰;王冲;何更新;郑七振

收起

中文目录

  • 中国工程建设标准化协会公告

  • 前  言

  • 1 总  则

  • 2 术  语

  • 3 基本规定

    • 3.1 一般规定

    • 3.2 拌合物取样与制备

    • 3.3 试件的成型及养护

    • 3.4 试验或检测报告

  • 4 拌合物性能试验

    • 4.1 坍落度及坍落度经时损失试验

    • 4.2 扩展度及扩展度经时损失试验

    • 4.3 扩展时间试验

    • 4.4 凝结时间试验

    • 4.5 表观密度试验

    • 4.6 含气量试验

    • 4.7 纤维体积率试验

  • 5 物理力学性能试验

    • 5.1 抗压强度试验

    • 5.2 轴心抗压强度试验

    • 5.3 静力受压弹性模量试验

    • 5.4 泊松比试验

    • 5.5 抗弯强度与弯曲韧性试验

    • 5.6 抗拉性能试验

    • 5.7 劈裂抗拉强度试验

    • 5.8 粘结强度试验

    • 5.9 超高性能混凝土与钢筋的握裹强度试验

    • 5.10 线膨胀系数试验

    • 5.11 耐磨性试验

    • 5.12 抗冲磨性试验

    • 5.13 硬化超高性能混凝土密度试验

    • 5.14 钢纤维与超高性能混凝土基体粘结强度试验

  • 6 长期性能和耐久性能试验

    • 6.1 早龄期自收缩试验

    • 6.2 干燥收缩试验

    • 6.3 受压徐变试验

    • 6.4 抗氯离子渗透性能试验

    • 6.5 抗气体渗透性能试验

  • 本标准用词说明

  • 引用标准名录

收起

英文目录

  • 1 General provisions

  • 2 Terms

  • 3 Basic requirements

    • 3.1 General requirements

    • 3.2 Mixture sampling and preparation

    • 3.3 Forming and curing of specimen

    • 3.4 Test report

  • 4 Test of mixture properties

    • 4.1 Test of slump and slump-loses through time

    • 4.2 Test of slump-flow and slump-flow loses through time

    • 4.3 Test of slump-flow time

    • 4.4 Test of setting time

    • 4.5 Test of apparent density

    • 4.6 Test of air content

    • 4.7 Test of fiber content

  • 5 Test of physical and mechanical properties

    • 5.1 Test of compressive strength

    • 5.2 Test of axial compressive strength

    • 5.3 Test of elastic modulus under static pressure

    • 5.4 Test of poisson's ratio

    • 5.5 Test of bending strength and bending toughness

    • 5.6 Test of axial tensile performance

    • 5.7 Test of splitting tensile strength

    • 5.8 Test of concrete bond strength

    • 5.9 Test of bond strength between ultra-high performance concrete and steel bars

    • 5.10 Test of linear expansion coefficient

    • 5.11 Test of abrasion resistance

    • 5.12 Test of hydrulic abrasion resistance

    • 5.13 Test of density of hardened ultra-high performance concrete

    • 5.14 Test of bond strength between fiber and ultra-high performance concrete matrix

  • 6 Test of long-term performance and durability

    • 6.1 Test of early age autogenous shrinkage

    • 6.2 Test of drying shrinkage

    • 6.3 Test of creep of ultra-high performance concrete in compression

    • 6.4 Test of resistance of ultra-high performance concrete to chloride penetration

    • 6.5 Test of resistance of ultra-high performance concrete to gas penetration

  • Explanation of wording in this standard

  • List of quoted standards

收起

公告

中国工程建设标准化协会公告

4-40-00
第861号
关于发布《超高性能混凝土试验方法标准》的公告
根据中国工程建设标准化协会《关于印发〈2018年第二批协会标准制订、修订计划〉的通知》(建标协字〔2018〕030号)的要求,由上海市建筑科学研究院有限公司、广州市玖珂瑭材料科技有限公司等单位编制的《超高性能混凝土试验方法标准》,经本协会混凝土结构专业委员会组织审查,现批准发布,编号为T/CECS 864-2021,自2021年10月1日起施行。
中国工程建设标准化协会
2021年5月18日
收起

本书术语

术语 英文名称 术语 英文名称
超高性能混凝土 ultra-high performance concrete 抗拉性能 tensile performance
粘结强度 bond strength 早龄期自收缩 early age autogenous shrinkage
干燥收缩 drying shrinkage 抗气体渗透性能 resistance to gas penetration

确定